• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1191-1198
• /
• 2011

The railway business was began at England in 1767. Since then, it has been changed for configuration of rail over the years and made in the form of I. The train propulsion has been developed in a engine of steam, diesel, motor, electromagnetic force and a pneumatic engine, continuously. also, the friction has been improved in a steel-wheel, rubber tire, frictionless maglev system and railless system. In consequence, the efficiency and improvement speed for train have been accomplished. In this paper, it is investigated for the structure with lightweight using the change for supporting the form of lateral pressure by centrifugal force in the substructure supporting load for railway vehicles.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.12
• /
• pp.1-11
• /
• 1993

This paper concentrates on models useful for analyzing the error performance of ML(Maximum Likelihood) estimators of a single unknown signal parameter: that is the error intensity model. We first develop the point process representation for the estimation error and the conditional distribution of the estimator as well as the distribution of error candidate point process. Then the error intensity function is defined as the probability dessity of the estimate and the general form of the error intensity function is derived. We then develop several intensity models depending on the way we choose the candidate error locations. For each case, we compute the explicit form of the intensity function and discuss the trade-off among models as well as the extendability to the case of multiple parameter estimation.

• The Korean Journal of Zoology
• /
• v.7 no.1
• /
• pp.6-8
• /
• 1964

1. A total of 260 individuals of carp was collected from Nakdong and Hyungsan Rivers. 2. The normal dental form of carp is 3, 1, 1-1, 1, 3, but the author observed abnormal dental forms (3, 2 or 1, 1, (+1)-1, 1 or 2, 3). 3. Variation ratios of dental forms are : A. Normal form; 3, 1, 1-1, 1, 3..........88.85% B. Abnormal forms; a. 3, 2, 1-1, 1 or 2, 3..........2.31% b. 3, 1, 1, 1-1, 1 or 2, 3..........5.00% c. 3, 2, 1, 1-1, 1 or 2, 3..........3.07% d. with 2 or 3 bone processes..........0.77% 4. The ratios among the length of first row (I), length of second tooth in first row ($I_{-2}$) and mid line(M) are as follows; 5. The growth of bone process beside second row tooth is not concerned with the body growth. 6. The number of the groove on second tooth in first row increases according to the growth of body.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.6
• /
• pp.2001-2011
• /
• 2017

In 1997, H. Li [12] proposed a conjecture: if $M^n(n{\geqslant}3)$ is a complete spacelike hypersurface in de Sitter space $S^{n+1}_1(1)$ with constant normalized scalar curvature R satisfying $\frac{n-2}{n}{\leqslant}R{\leqslant}1$, then is $M^n$ totally umbilical? Recently, F. E. C. Camargo et al. ([5]) partially proved the conjecture. In this paper, from a different viewpoint, we study closed convex spacelike hypersurface $M^n$ in locally symmetric Lorentz space $L^{n+1}_1$ and also prove that $M^n$ is totally umbilical if the square of length of second fundamental form of the closed convex spacelike hypersurface $M^n$ is constant, i.e., Theorem 1. On the other hand, we obtain that if the sectional curvature of the closed convex spacelike hypersurface $M^n$ in locally symmetric Lorentz space $L^{n+1}_1$ satisfies $K(M^n)$ > 0, then $M^n$ is totally umbilical, i.e., Theorem 2.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.689-697
• /
• 2005

The soil nailing system at permanent slope reinforcement is used with various facing methods in Korea. Also, pressure-injected grout technique is variously applied to many structures. However, most design of the pressure-injected grout technique have been carried out empirically because of complicated mechanisms associated with the behavior of surrounding soils and the hardening process of cement grout. Therefore this study, a newly modified soil nailing technology named as the PGSN (Pressure Grouting Soil Nailing) system with fabric form is developed to increase the global stability. Up to now, the PGSN system has been estimated mainly focusing on an establishment of the design procedure. In the present study, numerical study are carried out to evaluate potential failure surface and minimum factor of safety including facing stiffness and expanded radius of cemented grout by SSR (Shear Strength Reduction) technique. Also, results of numerical analysis are carried out for the typical section of soil nails slope using $FLAC^{2D}$ program for expanded effective radius by pressure grouting.

• Korean Journal of Pharmacognosy
• /
• v.7 no.4
• /
• pp.237-240
• /
• 1976

To investigate the constituents of following plants, Valeriana fauriei species, which are V. fauriei var. fauriei $H_{ARA}$, V. fauriei form. coreana $H_{ARA}$ and V. fauriei var. dasycarpa $H_{ARA}$, we carried out gas-liquid chromatographical analysis of the volatile oils of these plants and found that camphene, l-bornylacetate, ${\alpha}-pinene,\;{\beta}-pinene$, d,l-limonene, l-borneol and ${\alpha}-kessylacetate$ were common components in their volatile oils. However, their terpenoidal composition was considerably different from ${\alpha}-kessylacetate$ in V. faurie var. fauriei, from kessanol, ledol, kessoglycol and nardol in V. fauriei var. dasycarpa, and from kessoglycoldiacetate, ${\alpha}-kessylalcohol$, faurinone and terpineol in V. faurie form. coreana. It was found by gas-liquid chromatography that the terpenoidal patterns of these Korean valerians were similar to those of Japanish valerians.

• Architectural research
• /
• v.2 no.1
• /
• pp.7-15
• /
• 2000

A bubble diagram is understood as a graphic medium which bridges program and plan in architectural design process. The role of a bubble diagram is either to generate or to explain a plan in relation to its program. Despite the explicit role of a bubble diagram in architectural design process, what a bubble diagram indicates exactly is very ambiguous. Here I attempt to reveal the nature of the bubble diagram more sharply. My main argument is that the ambiguity of a bubble diagram results from the fact that it is used to range two different types of representational formats. Reviewing the theories of shape recognition and shape representations in vision science, I will also argue that the procedural description of architectural design process should be criticized and that the focus of design method research has to be shifted into the representational format of form description in architectural design process.

• Honam Mathematical Journal
• /
• v.40 no.1
• /
• pp.61-73
• /
• 2018

The main aim of this research paper is to evaluate the general integral of the form $${\int_{0}^{1}}x^{c-1}(1-x)^{c+{\ell}}[1+{\alpha}x+{\beta}(1-x)]^{-2c-{\ell}-1}\atop {\times}_3F_2\left\[ {a,\;b,\;2c+{\ell}+1} \\ {\frac{1}{2}(a+b+i+1),\;2c+j\;;\frac{(1+{\alpha})x}{1+{\alpha}x+{\beta}(1-x)} }\right]dx$$ in the most general form for any ${\ell}{\in}\mathbb{Z}$; and $i, j=0,{\pm}1,{\pm}2$. The results are established with the help of generalized Watson's summation theorem due to Lavoie, et al. Fifty interesting general integrals have also been obtained as special cases of our main findings.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.806-809
• /
• 2000

The factors which can improve tool life in machining are consisted of tool geometries, tool materials, coating methods. cutting environments, cutting conditions and so on. Cutting speed in cutting conditions is one of the important factors which can directly influence on the tool life. This paper deals the machinability which is concerned about the cutting direction and the tilt angle of fret form surface in hot die steel(STD I I). The NC datum were analysrd and the effective tool diameters were calculated according to the change of tilt angle the program which can continue the cutting speed with the change of spindle revolution is developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.315-316
• /
• 2006