• Structural Engineering and Mechanics
• /
• 제58권4호
• /
• pp.731-743
• /
• 2016

Plastic behaviors, based on the von Mises yield criterion, of circular discs containing a purely elastic, circular inclusion under uniform temperature loading are studied with the finite element analysis. Temperature-dependent mechanical properties are considered for the matrix material only. In addition to analyzing the plane stress and plane strain disc, a 3D thin disc and cylinder are also analyzed to compare the plane problems. We determined the elastic irreversible temperature and global plastic collapse temperature by the finite element calculations for the plane and 3D problem. In addition to the global plastic collapse, for the elastically hard case, the plane stress problem and 3D thin disc may exhibit a local plastic collapse, i.e. significant pile up along the thickness direction, near the inclusion-matrix interface. The pileup cannot be correctly modeled by the plane stress analysis. Furthermore, due to numerical difficulties originated from large deformation, only the lower bound of global plastic collapse temperature of the plane stress problem can be identified. Without considerations of temperature-dependent mechanical properties, the von Mises stress in the matrix would be largely overestimated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1165-1167
• /
• 1995

The Cu-Si alloy has been proposed as a new matrix materal for filamentary Nb-Ti wires in AC use. The Cu-Si alloy shows approprite mechanical and electrical properties, and is economically more favourable than the Cu-Ni alloy matrix used currently. Moreover, the addition of Si to Cu prevents the formation of intermetallic compounds around the filaments. After we investigated resistivity and hardness of Cu-Si alloy as matrix materal, investigated CuSi/NbTi interface reactions and superconductivities of superconducting wires that were made by various heat treatment.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 추계학술대회
• /
• pp.57-60
• /
• 1991

A new approach to texture classification for ultrasound liver diagnosis using run difference matrix was developed. The run difference matrix consists of the gray level difference along with distance. From this run difference matrix, we defined several parameters such as LDE, LDEL, NUF, SMO, SMG, SHP etc. and three vectors namely DOD, DGD and DAD. Each parameter value calculated in fatty cirrhotic, chronic hepatitic and normal liver mage was plotted in two dimensional plane. We compared our results with run length method. There are several advantages of run difference matrix method over the run lengths. 1) It is more sensitive to small difference of gray level distribution. 2) The parameters provide more statistically significant value. Images were classified with the extracted parameters to each diseases using neural networks. In preliminary clinical exprements, this approach showed satisfying results.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.376-379
• /
• 1995

Employing the muffin-tin-orbital theory combined with pseudo-potential concepts, we have evaluated hybridization matrix elements between R and T sites in $RT_{2}$ compounds. The matrix elements are calculated with two parameters, the interatomic distance between R and T atoms from the crystal structure data, and the expectation values of the radial distances for the radial wave functions of the ground state charge densities, which are obtained from the linearized muffin-tin orbital band method within the local density approximation. It is found that the R 4f/T 3d hybridization matrix elements decrease with an increasing atomic number from R=Ce to Gd, and that they are smaller in $RNi_{2}$ than in $RCo_{2}$, which are consistent with trends observed in recent photoemission spectroscopy experiments. It is also found that the magnitudes of the hybridization matrix elements in $RFe_{2}$ are comparable to those in $RNi_{2}$.

• 분석과학
• /
• 제30권4호
• /
• pp.167-173
• /
• 2017

In the era of the forth Industrial Revolution, open source code and open source hardware have gained much attention. In particular, 3D printing technology is expanding into the realms of classical science, technology and our daily lives. Relatedly, in the present study, we demonstrate the manufacture of a nano-LC MALDI spotter robot using 3D printing technology. The parts of the spotter robot were either made using a 3D printer or purchased as 3D printer parts from the 3D printer online market, so that anyone can make the robot without a deep knowledge of engineering or electronics, i.e., DIY (do-it-yourself) product. In the nano-LC MALDI spotter, the nano-LC eluent and MALDI matrix were mixed in a T-union and discharged from the capillary outlet. The eluent and matrix mixture could be spotted onto the movable MALDI plate. The MALDI plate was designed to translate in a two-dimensional space (xy plane), which was enabled by the movements of two stepper motors. In the paper, all computer-aided design (CAD) files for the parts and operation software are provided to help the reader manufacture their own spotter robot.

• 열처리공학회지
• /
• 제16권5호
• /
• pp.253-259
• /
• 2003

In this study, to find out the reason of deterioration in surface roughness of steel and cast iron after Tufftride, it has been investigated on the relation between the surface roughness and various factors such as the evolution of compound layer, surface morphology, and surface hardness, and change of pore ratio in the compound layer during Tufftride at $580^{\circ}C$. It is found that the surface roughness was increased with the evolution of compound layer during Tufftride of steel and cast iron. The change of surface roughness after Tufftride was reduced with decreasing tho content of carbon and cementite ($Fe_3C$) in the materials. in the cast irons, the various shaped graphites that was exposed to the surface should induce the discontinuous growth of the compound layer, and this resulted in the incoherent interfaces between matrix and compound layer and the deterioration of surface roughness. In the steels, the existence of cementites in the matrix resulted in the incoherent interfaces between matrix and compound layer. It is considered that during Tufftride the surface roughness must be mainly influenced by the formation of the incoherent interface between compound layer and matrix that is affected by some factors such as the microstructure, the composition, and the hardness of the matrix.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.55-60
• /
• 1997

A lysosomal and matrix degrading enzyme $\beta$-glucuronidase activity was measured in BALS/c mice fed high and low Ca in combination with the i.p. adminstration of calcium-regulating hormones including parathyoid hormone(PTH), calcitonin(CT) and cholecalciferol(Vit D). After feeding experimental diets for five weeks, mice were sacrificed by cervical dislocation and the enzyme was fluometrically measured at 440nm. $\beta$-Glucuronidase activity was inhibited by high calcium in the diet. in addition, vitamin D also inhibited the enzyme activity in the serum regardless of the level of dietary calcium. In contrast, PTH has shown to stimulate the enzyme at all the levels of dietary calcium. Calcitonin, and inhibitor of PTH action for bone resorption, revealed to curb PTH effect in this enzyme, whereas CT stimulated the action of vitamin D in the serum. The above results led us to conclude that osteoclastic bone resorption and senile osteoporosis may be reduced by adequate dietary calcium and vitamin D.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.127-135
• /
• 2006

영상 기반 3차원 모델링은 카메라로부터 획득된 영상을 입력으로 하여 3차원 그래픽 모델을 생성하는 기술로 고가형 3D 스캐너의 대체 기술로 연구되어지고 있다. 본 논문에서는 피라미드 볼륨 교차기법을 이용한 영상 기반 3차원 모델링 시스템을 제안한다. 3차원 모델을 생성하기 위한 제안 알고리즘은 카메라 보정 단계, 3차원 형상 복원단계, 3차원 표면 생성 단계로 이루어진다. 카메라 보정 단계에서는 영상 획득용 카메라에 대한 카메라 행렬을 계산하며 3차원 형상 복원 단계에서는 실루엣 기반 피라미드 볼륨 교차 기법에 의해 실 3차원 형상을 생성한다. 3차원 표면 생성 단계에서는 3차원 형상 복원 단계의 결과인 복원 복셀 공간을 그물망 형태의 3차원 표면을 생성시킨다. 실험 결과 제안 알고리즘이 비교적 정확하게 3차원 모델을 생성함을 확인하였다.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.45-54
• /
• 2007

In the context of auto-landing containers from a container ship to a truck or automatic guided vehicle and vice versa, this research investigates three schemes, one in Part I and two in Part II, for measuring the absolute position of a container. Coordinate transformations between the reference-coordinate, sensor-coordinate, and body-coordinate systems are briefly discussed. The scheme explored in Part I aims the use of three laser-slit sensors, which are relatively inexpensive. In this case, nine nonlinear equations are formulated for six unknown variables (three for orientation and three for position), so a closed-form solution is not available. Instead, an approximate solution through linearization was derived. An advantage of the method in Part I is its ability to measure an absolute position in 3D space, while a disadvantage is the computation time required to obtain pseudo-inverses and the approximate nature of the obtained solution. Numerical examples are provided.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1516-1520
• /
• 1987

This paper proposes fault simulation algorithms for Domino CMOS circuits, The inputs having fanouts are described correctly in the algorithms by modeling the functional block in the Domino CMOS circuits as Modified dependency matrix. The proposed algorithms generate easily the test sequence which can detect the s-a-O, s-a-I, stuckopen faults in the Domino CMOS circuits.