• 멤브레인
• /
• 제20권3호
• /
• pp.217-221
• /
• 2010

기존 고분자전해질연료전지(PEMFC)의 단점을 극복하기 위해 고체전해질 알카라인연료전지(SAMFC)가 근래에 많이 연구되고 있다. 본 논문에서는 술폰화 폴리벤지이미다졸(PBI) 유도체를 이용하여 SAMFC용 막을 제조하였다. 술폰화 폴리벤지이미다졸 유도체는 KOH에 의해 쉽게 도핑되고 도핑된 막은 높은 $OH^-$의 전도도와 기계적 강도를 보였다. 특히 sPBI-co-PBI (술폰화 PBI : 비술폰화 PBI = 75 : 25)의 경우, $90^{\circ}C$ 100% 상대습도 하에서 $2.98{\times}10^{-2}\;S/cm$의 높은 $OH^-$의 전도도를 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.241-245
• /
• 2007

[ $(Ba_{0.9-x}Sr_xCa_{0.10})TiO_3$ ] (x=0.33, 0.36) powders were prepared by sol-gel method. $(Ba,Sr,Ca)TiO_3$(BSCT) thick films, undoped and doped with $MnCO_3$ and $Yb_2O_3(0.1{\sim}0.7mol%)$, were fabricated by the screen printing method on the alumina substrate. The coating and drying procedure was repeated 6-times. The Pt bottom electrode was screen printing method on the alumina substrate. These BSCT thick films were annealed at $1420^{\circ}C$ for 2 hr in atmosphere. The upper electrodes were fabricated by screen printing the Ag paste and then firing at $590^{\circ}C$ for 10 min. And then the structured and dielectric properties as a function of the doping amount of $Yb_2O_3$ were studied. As a result of the TG-DTA, exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All BSCT thick films showed XRD patterns of typical cubic peroveskite structure. The average thickness of BSCT thick films was about $70^{\mu}m$. The curie temperature and the dielectric constant decreased with increasing $Yb_2O_3$ doped content and the relative dielectric constant of the specimen, doped with 0.5 mol% $Yb_2O_3$ at BSCT(54/36/10), showed a best value of 5018 at curie temperature.

• 멤브레인
• /
• 제22권3호
• /
• pp.155-170
• /
• 2012

연료전지는 석유엔진과 비교하여 높은 전류밀도와 효율성, 그리고 친환경적이기 때문에 21세기 들어 대체 발전시스템으로서 각광받아왔다. 연료전지 시스템에서 고분자 전해질 막은 핵심부품으로써 현재 Nafion막이 연료전지시스템에서 사용 중이지만 높은 제조단가와 고온에서 낮은 전도도를 가지는 단점을 가지고 있다. 그러므로 많은 학자들이 낮은 제조단가, 높은 물리적 특성들을 달성하기 위한 연구를 진행하여 왔으며 연료전지의 상용화와 동시에 고성능의 연료전지의 개발을 위하여 많은 방법들이 개발되어 왔다. 그중, 유무기 복합막은 유기물과 무기물의 물성을 균일하게 조합할 수 있으므로 잠재성을 가지고 있는 제조방법이다. 본고에서는 다양한 무기물이 사용되어 제조된 유무기 복합막의 연구동향에 대하여 조사하였다.

• 천문학회보
• /
• 제46권1호
• /
• pp.32.3-33
• /
• 2021

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~ 490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into bulk-narrow, bulk-broad, and non_bulk with respect to their velocity and velocity dispersion. We correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The bulk-narrow component that resides within r25 is likely to follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• 천문학회보
• /
• 제35권2호
• /
• pp.30.2-30.2
• /
• 2010

A direct tilted-ring fitting method allows us to investigate kinematic structure of spiral galaxies. By employing the method to high-resolution HI data cubes, we can more easily trace warp characteristics of spiral galaxies than ever. In this contribution, we make use of TiRiFiC to VLA HI data cube of spiral galaxies in Virgo cluster, and present our preliminary yet interesting results. The TiRiFiC (Tilted-Ring-Fitting-Code) is publicly available code that provides 'best-fit' tilted-ring parameters (i.e. position angle and inclination) via chi-square minimization technique. We also discuss possible biases (e.g., resolution dependency) and its effect on our conclusions.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.59-66
• /
• 1989

본 연구는 이상에서 언급된 경향과 3차원 형상모델링 시스템 개발의 필요성에 따라 1차적으로 직육면체, 원기둥, 삼각기둥을 원형(primitive)으로 하는 모델러를 개발하여 CAD/CAM 시스템 개발의 기초자료를 제공함과 동시에 궁극적으로는 국내중소기업에서의 간단한 설계, 제작 생산분야에 알맞는 PC 수준의 전용 3차원 형상모델링 시스템을 개발할 목적으로 수행되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.245-248
• /
• 2006

The objective of this study is to take the first step in creating a user-friendly health monitoring system for recycled aggregate concrete structure using acoustic emission(AE). Each specimen was a cube, the edge of which was 150mm. For pull-out tests, a steel rebar, 13mm in diameter, was embedded in the center of each specimen and casting directions(i.e., vertical and horizontal) were considered in this paper. The AE parameters were analyzed for damage levels(i.e. internal cracking stage, pull-out stage) of all specimens. Results from this study show that event, duration versus amplitude of a signal, showed a clear difference for different loading stages depending upon the concrete casting directions.

• 공업화학
• /
• 제22권2호
• /
• pp.190-195
• /
• 2011

다중층을 형성하여 광자를 가두는 효과와 산란층의 효과를 보고, $TiCl_4$ 처리를 통해 전극에서의 전자의 재결합이 줄어드는 정도와 그에 따른 효과를 알아보기 위하여 여러 가지 방법으로 $TiO_2$ 전극을 형성하고, 가장 최적의 전극 조건을 알아보았다. 각 전극의 특성을 알기 위해서 I-V 곡선, UV-VIS 분광기, EIS, IPCE를 측정하였다. 그 결과, I-V 곡선을 통해 한 층 보다는 다중층이 효율이 더 높은 것을 확인할 수 있었고, 기판 표면과 전극표면에 $TiCl_4$ 처리를 함으로써 EIS분석을 통해 반응저항이 감소하여 효율이 증가함을 확인할 수 있었다. 여러 전극 조건 중 산란층을 지닌 전극이 기본 한 층을 사용한 전극의 효율보다 약 19% 정도 높아짐을 확인하였다. 이러한 효율의 증가는 장파장을 투과하는 빛이 산란층을 통과할 때 전자 이동 경로가 길어지게 되어 단락전류의 값을 증가시키기 때문이다. 이에 따라, $J_{SC}$는 약 10% 정도 증가하였으며, IPCE는 최대 피크에서 약 12%가 향상되는 특성을 보였다.

• Advances in materials Research
• /
• 제9권3호
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• Wind and Structures
• /
• 제23권5호
• /
• pp.465-483
• /
• 2016

This study aims to enhance the understanding of the surface pressure distribution around rectangular bodies, by considering aspects such as the suction pressure at the leading edge on the top and side faces when the body aspect ratio and wind direction are changed. We carried out wind tunnel measurements and numerical simulations of flow around a series of rectangular bodies (a cube and two rectangular bodies) that were placed in a deep turbulent boundary layer. Based on a modern numerical platform, the Navier-Stokes equations with the typical two-equation model (i.e., the standard $k-{\varepsilon}$ model) were solved, and the results were compared with the wind tunnel measurement data. Regarding the turbulence model, the results of the $k-{\varepsilon}$ model are in overall agreement with the experimental results, including the existing data. However, because of the blockage effects in the computational domain, the pressure recovery region is underpredicted compared to the experimental data. In addition, the $k-{\varepsilon}$ model sometimes will fail to capture the exact flow features. The primary emphasis in this study is on the flow characteristics around rectangular bodies with various aspect ratios and approaching wind directions. The aspect ratio and wind direction influence the type of wake that is generated and ultimately the structural loading and pressure, and in particular, the structural excitation. The results show that the surface pressure variation is highly dependent upon the approaching wind direction, especially on the top and side faces of the cube. In addition, the transverse width has a substantial effect on the variations in surface pressure around the bodies, while the longitudinal length has less influence compared to the transverse width.