• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.373-378
• /
• 2006

We present the design, fabrication, and characterization of a multi-chip microelectrofluidic bench, achieving both electrical and fluidic interconnections with a simple, low-loss and low-temperature electrofluidic interconnection method. We design 4-chip microelectrofluidic bench, having three electrical pads and two fluidic I/O ports. Each device chip, having three electrical interconnections and a pair of two fluidic I/O interconnections, can be assembled to the microelectofluidic bench with electrical and fluidic interconnections. In the fluidic and electrical characterization, we measure the average pressure drop of $13.6{\sim}125.4$ Pa/mm with the nonlinearity of 3.1 % for the flow-rates of $10{\sim}100{\mu}l/min$ in the fluidic line. The pressure drop per fluidic interconnection is measured as 0.19kPa. Experimentally, there are no significant differences in pressure drops between straight channels and elbow channels. The measured average electrical resistance is $0.26{\Omega}/mm$ in the electrical line. The electrical resistance per each electrical interconnection is measured as $0.64{\Omega}$. Mechanically, the maximum pressure, where the microelectrofluidic bench endures, reaches up to $115{\pm}11kPa$.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.715-742
• /
• 2017

Earth berms are often left in place to support retaining walls or piles in order to eliminate horizontal struts in excavations of soft soil areas. However, if the excavation depth is relatively large, an earth berm-supported retaining system may not be applicable and could be replaced by a multi-bench retaining system. However, studies on multi-bench retaining systems are limited. The goal of this investigation is to study the deformation characteristics, internal forces and interaction mechanisms of the retaining structures in a multi-bench retaining system and the failure modes of this retaining system. Therefore, a series of model tests of a two-bench retaining system was designed and conducted, and corresponding finite difference simulations were developed to back-analyze the model tests and for further analysis. The tests and numerical results show that the distance between the two rows of retaining piles (bench width) and their embedded lengths can significantly influence the relative movement between the piles; this relative movement determines the horizontal stress distribution in the soil between the two rows of piles (i.e., the bench zone) and thus determines the bending moments in the retaining piles. As the bench width increases, the deformations and bending moments in the retaining piles decrease, while the excavation stability increases. If the second retaining piles are longer than a certain length, they will experience a larger bending moment than the first retaining piles and become the primary retaining structure. In addition, for varying bench widths, the slip surface formation differs, and the failure modes of two-bench retained excavations can be divided into three types: integrated failure, interactive failure and disconnected failure.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.75-83
• /
• 2012

Space dominates all the art activities human do and plays a role of providing aesthetic emotion. Architecture, sculpture, painting, and furniture, etc. these two and three dimensional works are represented in space and interpreted the role of its form, structure and function. Each area is different, but space has been studied in philosophy, physics, geometry, and mathematical studies, etc. and has been consistently interpreted and represented relating to a variety of human creative activity. Furniture is also three dimensional art being dependent on space. In the United States in 2004, I made the living room bench by applying the spatial concept at Rochester Institute of Technology. Two years later, this design was adopted by wendell Castle Collection, an American furniture company, then prototype were made and tested three times during a year, and then since 2007 as indoor benches it has been manufactured in the United States. The study's purpose is to order the process of its development based on the experience of bench production applied the spatial concept, and by analyzing the properties of spatial concept, I am planning to propose a new concept on interaction with the space and furniture for next.

• 생물환경조절학회지
• /
• 제32권2호
• /
• pp.132-138
• /
• 2023

비모란선인장은 한국 화훼산업에서 중요한 품목으로 해외 수출량이 많지만 생산에 한계가 있다. 본 연구에서 비모란선인장의 수경재배와 토경재배 방법에 따른 생육과 수량 차이를 확인하고자 하였다. 비모란선인장(Gymnocalycium mihanovichii) '이홍'을 이용하여 실증농가에서 생육 특성과 수량 등을 조사하였다. 비모란선인장에서 ebb and flow 재배방식을 1단과 2단(상·하단) 재배방법으로 벤치 수를 달리하여 여러 특성을 조사하였다. 수경재배 방법에 따라 비모란선인장 생육에 다소 차이가 있어 ebb and flow 재배방식인 1단 재배방법은 구경과 생체중에서 토양재배보다 생육이 좋은 경향을 보였다. 그러나 ebb and flow 재배방식인 2단(상·하단) 재배방법은 구경과 생체중에서 생육량은 떨어지지만 단위 면적당 생산량 증가로 상품수량을 크게 늘렸다. 재배방법에 따라 일부 색상의 차이가 있었지만 외관으로는 큰영향이 없는 것으로 판단된다. 비모란선인장의 효율적인 생산량 증대를 위해 ebb and flow 재배방식인 2단 재배방법과 같은 재배기술이 농가에 지속적으로 보급되어야 할 것으로 보인다.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.33-39
• /
• 1997

In order to establish a new temperature criterion to prevent the pistons from ring sticking due to deposit formation, bench test and engine test were performed. The effects of oil degradation and temperature on deposit formation was studied by a modified panel coking test. Oil degradation was analyzed by FTIR. Oil oxidation and nitration were selected as a factors to evaluate oil degradation. Bench test results show that oil oxidation is more effective to the deposit formation than oil nitration. And the temperature increase accelerates deposit formation and deposit formation increase rapidly above 26$0^{\circ}C$. Especially, in case of degraded oil, the deposit formation increases so rapidly that ring sticking can occur. The effect of piston temperature on the deposit formation was confirmed by engine test.

• 실천공학교육논문지
• /
• 제7권1호
• /
• pp.25-30
• /
• 2015

가상현실은 프로그래밍, 시뮬레이션, 컴퓨터 그래픽스 등 다양한 학문의 종합체이며 이러한 형태의 새로운 문화적 패러다임의 등장은 우리에게 새로운 개념의 콘텐츠 개발 방법과 정보교류방식을 요구하고 있다. 본 연구에서는 3D 가상현실 기술을 이용하여 I-Bench Mobile 이라는 새로운 장비를 통해 사용자와 인터렉티브가 가능한 가구배치 시뮬레이션을 제안한다. 이것은 3D로 제작이 되며 물리 및 중력을 적용한다는 점에 강점을 두며, 또한 스냅샷 기능을 통해 고객들이 가구를 자신이 원하는 장소에 배치하여 궁극적으로 고객 만족도 향상을 목표로 하고 있다. 가상증강현실기술을 이용한 소프트웨어를 개발하는 본 연구 과정은 공학계열의 컴퓨터학과와 예술계열의 영상 예술 디자인학과, 시각 디자인 학과와 같은 다양한 학과들에서 다루는 교육과정의 작업이 필요하므로 단지 코딩 기술이 아닌 여러 학문의 기술들이 함께 어우러진 융합 IT기술 교육의 좋은 사례라고 할 수 있다.

• 정보과학회 논문지
• /
• 제42권2호
• /
• pp.169-176
• /
• 2015

최근 데이터베이스 관리 시스템에서는 이중 쓰기 버퍼 기법의 단점을 보완할 수 있는 원자성 쓰기 기법이 제시되었다. 원자성 쓰기 기법을 지원하기 위해서는 파일시스템과 I/O 스케줄러 등의 I/O 서브시스템과 SSD의 원자성 쓰기의 보장이 필요하다. 본 연구에서는 MariaDB의 데이터 쓰기의 기본 단위를 사용하여, 쓰기 단위 연속 블록 할당 기법, 플래그 전달을 통한 I/O 명령 병합 방지 기법, 원자성 쓰기를 지원하는 SSD를 통해 MariaDB의 원자성 쓰기를 지원하는 연구를 진행하였다. Tpcc-mysql와 SysBench를 사용하여 MariaDB에 제안된 기법을 적용한 결과, 원자성 쓰기 기법의 성능을 평가한 결과, 데이터베이스의 처리량이 이중 쓰기 버퍼 기법을 사용한 MariaDB 대비 약 40%~50% 향상된 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.475-479
• /
• 2012

본 논문은 고차가지구조 폴리머인 AEO3000 를 이용한 UV 광경화 성형 공정을 제안하고자 한다. 이는 기존의 바이오칩 제작에 사용되는 PDMS 보다 경도가 높아 금속 전극 형성이 용이하고 제작 공정이 빠르다는 장점을 갖는다. AEO3000 을 이용하여 본 연구에서는 4 개의 소자를 전기적 유체적으로 연결할 수 있는 전기유체 통합벤치를 제작하고 미소유체 혼합소자와 세포분리소자를 연결, 본 소재와 공정이 바이오칩에 적용될 수 있음을 검증하였다. 전기 유체적 특성 분석 결과 전기적 접촉 저항은 $0.75{\pm}0.44{\Omega}$으로 충분히 작은 값을 보였으며, 유체 접속의 압력 저하는 8.3kPa로 기존의 튜브 연결 방법 대비 39.3% 개선된 값을 보였다. 통합벤치에 접속된 소자에 활성 및 비활성 효모를 주입하여 순차적인 혼합 및 재분리를 성공적으로 구현함으로써 본 소자에 적용된 AEO3000 및 UV 광경화 공정이 생체시료의 처리에 적용될 수 있음을 실험적으로 검증하였다. 이는 바이오 의료 분야에 적용 가능한 생체 친화적 소재의 고속 생산에 응용될 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1457-1469
• /
• 2002

This paper is the first of several companion papers, which investigate axial stratification process and its effects in an Sl engine. The axial stratification is very sophisticate phenomenon, which results from combination of fuel injection, port and in-cylinder flow and mixing. Because of the inherent unsteady condition in the reciprocating engine, it Is impossible to understand the mechanism through the analytical method. In this paper, the ports were characterized by swir and tumble number in steady flow bench test. After this, lean misfire limit of the engines, which had different port characteristic, were investigated as a function of swirl ratio and injection timing for confirming the existence of stratification. In addition, gas fuel was used for verifying whether this phenomenon depends on bulk air motion of cylinder or on evaporation of fuel. High-speed gas sampling and analysis was also performed to estimate stratification charging effect. The results show that the AFR at the spark plug and LML are very closely related and the AFR is the results of bulk air motion.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.112-117
• /
• 2013

In order to reuse a register transfer level (RTL)-based IP block, it takes another architectural exploration in which the RTL will be put, and it also takes virtual platforms to develop the driver and applications software. Due to the increasing demands of new technology, the hardware and software complexity of organizing embedded systems is growing rapidly. Accordingly, the traditional design methodology cannot stand up forever to designing complex devices. In this paper, I introduce an electronic system level (ESL)-based approach to designing complex hardware with a derivative of SystemVerilog. I adopted the concept of reuse with higher levels of abstraction of the ESL language than traditional HDLs to design multiplication server farms. Using the concept of ESL, I successfully implemented server farms as well as a test bench in one simulation environment. It would have cost a number of Verilog/C simulations if I had followed the traditional way, which would have required much more time and effort.