• 제목/요약/키워드: I-Beam

검색결과 1,499건 처리시간 0.042초

입사빔의 위치 및 세기에 따른 자기펌핑 위상공액파의 특성 (Dependence of Optical Phase Conjugation on Incident Beam Position and Intensity)

  • 손동환;전병욱;이임걸;손정영;임동건
    • 전자공학회논문지A
    • /
    • 제30A권3호
    • /
    • pp.43-51
    • /
    • 1993
  • Effects of incident beam position and intensity on self-pumped optical phase conjugation are presented using barium titanate as an optical phase conjugator. Depending on the position of incident beam, the crystal used consists of four major operating regions: irregular pulsing, regular pulsing, stable phase conjugation, and unstable oscillating regions. In the second region, the pulsing frequency and amplitude of phase conjugate beam are proportional to I$_{in}$ and I$_{in}^{0.85}$, respectively, where I$_{in}$ is the incident beam intensity. In the fouth region, the rising time and intensity of the first-generated pulse are proportional to I$_{in}^{0.92}$ and I$_{in}^{0.81}$, respectively. A frequency shift by beam fanning is also discussed by observing interference pattern from an interferometer.

  • PDF

현장실험을 통한 외부 후긴장 Steel I-Beam의 휨 거동 특성 (Flexural Behavior Characteristics of Steel I-Beam Strengthened by the Post-tensioning Method on the Field Experiment)

  • 조두용;박대열;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제6권3호
    • /
    • pp.151-158
    • /
    • 2002
  • 외부 후 긴장 공법은 설계에 수반되는 구조해석이 비교적 명확하여 강교량 구조물뿐만 아니라 건축 구조물 등 그 적용범위가 매우 넓다. 본 연구에서는 외부 비부착 강연선 및 강봉을 가진 Steel I-Beam의 휨거동과 보강효과를 연구하기 위하여 우선 합리적인 이론해를 제시하고, 긴장력 도입 후 정적 휨 재하 실험을 수행하여 긴장력 도입 정도에 따른 휨 보강정도를 분석하였다. 또한, 강봉을 사용한 경우와 강연선을 사용한 경우로 시험체를 분류하여, 긴장재 종류에 따른 휨거동 특성과 보강효과를 비교 분석하였다. 아울러 강봉의 개수와 편향부 유.무에 따른 Beam의 휨거동 특성과 부재의 처짐의 증가에 따른 Tendon 위치의 편심량 값이 변화하고, 그에 따른 프리스트레스트 I-Beam의 휨 거동에 미치는 영향을 규명하였다.

유한요소법에 의한 I형빔의 용접변형에 관한 연구 (A Study on Welding Deformation of I-Beam Steel Structure by FEM Method)

  • 석한길
    • Journal of Welding and Joining
    • /
    • 제21권5호
    • /
    • pp.561-567
    • /
    • 2003
  • For construction of I-beam steel structures, a fillet welding is one of the main manufacturing process. However, this welding process cause some problems associated with welding residual stress and welding deformation that are harmful to the safety of structures. Accordingly, this study clarified the creation mechanism of the welding deformation on I-beam steel structure from the experimental results given by the FEM method. To prevent or minimize the longitudinal bending deformation, first of all, a field supervision is necessary to observe the optimal groove design. Secondly, the welding order for cooling weld zone is needed.

iTECH 합성보의 내화성능에 대한 실험연구 (Experimental Study on the Fire Resistance of the iTECH Composite Beam)

  • 이승재;강성덕;최승관;김명한;김상대
    • 한국강구조학회 논문집
    • /
    • 제18권5호
    • /
    • pp.643-654
    • /
    • 2006
  • 본 연구에서는 iTECH 합성보 실험체에 대한 온도와 변형에 대한 내화성능을 ISO834 표준화재와 BS476-20 및 KSF2257 기준에 근거하여 평가하였다. 국내외적으로 복합구조의 내화성능을 규명하기 위한 연구는 지극히 미흡한 실정이며, 따라서 본 연구에서는 iTECH 합성보의 내화성능을 평가하기 위해 1.5m의 슬래브를 포함한 4..7m의 스팬길이에 대하여 실험을 수행하였다. 변수는 실험체의 단면크기, 피복재 보강방법과 보강두께, 그리고 하중비로 하여 내화실험을 수행하였다.

전자빔 가속기를 이용한 폴리프로필렌 섬유의 개질(I) - 전자빔 조사에 따른 폴리프로필렌 섬유의 물리적, 열적 특성변화 - (Electron Beam -Induced Graft Polymerization of Acrylic Aicd on Polypropylene Nonwoven Fabrics(I))

  • 김홍제;;임용진;이기풍
    • 한국염색가공학회지
    • /
    • 제15권2호
    • /
    • pp.102-108
    • /
    • 2003
  • Before studying graft polymerization of PP(polypropylene) nonwoven fabrics by electron beam preirradiation method, mechanical properties, thermal properties and degree of crystallinity of original and electron beam irradiated PP nonwoven fabrics were investigated. Morphological surface changes of electron beam irradiated PP nonwoven fabrics were not observed. And the melting temperature and crystallinity of electron beam irradiated PP nonwoven fabrics also did not change as compared with untreated PP nonwoven fabrics. But the breaking strength of electron beam irradiated PP nonwoven fabrics decreased with increasing electron beam absorbed dose due to breakdown of some parts of polymer main chain.

A parametric investigation on the hysteretic behaviour of CFT column to steel beam connections

  • Esfandyary, R.;Razzaghi, M.S.;Eslami, A.
    • Structural Engineering and Mechanics
    • /
    • 제55권1호
    • /
    • pp.205-228
    • /
    • 2015
  • The results of a numerical investigation pertaining to the hysteretic behaviour of concrete filled steel tubular (CFT) column to I-beam connections are discussed in detail. Following the verification of the numerical results against the available experimental tests, the nonlinear finite element (FE) analysis was implemented to evaluate the effects of different parameters including the column axial load, beam lateral support, shape and arrangement of stiffeners, stiffness of T-stiffeners, and the number of shear stiffeners. Pursuing this objective, an external CFT column to beam connection, tested previously, was selected as the case-study. The lateral forces on the structure were simulated, albeit approximately, using an incremental cyclic loading reversal applied at the beam tip. The results were compared in terms of hysteretic load-displacement curves, stress distributions in connection, strength, rotation, and energy dissipation capacity. It was shown that external T-stiffeners combined with internal shear stiffeners play an important role in the hysteretic performance of CFT columns to I-beam connections.

I 형강 격자 상판의 주부재 I형강에 대한 해석적 연구 (Analytical Study on I-beam of I-beam Grated Concrete slab)

  • 박창규;김용곤;정영수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.437-442
    • /
    • 2001
  • Recently, there have been increased much concerns about repair and rehabilitation works for aged concrete structures. In particular, it is known that due to repeated overburden vehicle there are significantly increasing number of aged concrete bridge slabs, which are strongly needed to construct and rehabilitate by innovative construction method. The objective of this research is to develop the new construction method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion during the repair and rehabilitation works of aged concrete slab, and can also sufficiently assure the quality through the minimization of in-situ works at the site. I-beams with punch holes, which are substituted instead of main reinforcing steels in concrete slabs, will be manufactured in accordance with the specification in the factory. and will be preassembled into the Panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This research is to investigate physical properties of I-Beam with punch holes itself through static and fatigue test with rational numerical analysis Finally this research is to suggest reformed I-beam through the numerical analysis.

  • PDF

고성능 강섬유보강 콘크리트가 적용된 I-단면 프리스트레스트 이중 콘크리트 보의 휨 거동 (Flexural Behavior of I-Section Prestressed Dual Concrete Beam Using High Performance Steel Fiber Reinforced Concrete)

  • 박대효;윤성환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.162-165
    • /
    • 2006
  • I-section prestressed concrete(I-PC) beam crack due to low tensile strength, may decrease rigidity and structural performance by excessive deflection. In an effort to this problem, in this research, I-section prestressed dual concrete(I-PDC) beam has been proposed, consisting of normal strength concrete in compression zone, and high performance steel fiber reinforced concrete(HPSFRC) with a bottom flange depth in tensile zone. Crack formation and its propagation are controlled by the HPSFRC in I-PDC beam. The initial cracking and service limit loads are increased along with the load carrying capacity and flexural stiffness.

  • PDF

일축 대칭 I 형 보의 모멘트 구배계수에 대한 연구 (A Study on the Moment Gradient factor of Mono-symmetric I Beam)

  • 김윤종;임남형;박남회;강영종
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2000년도 춘계학술대회 논문집
    • /
    • pp.439-446
    • /
    • 2000
  • 본 연구에서는 절점당 7자유도(뒤틀림 자유도 포함)를 갖는 보요소를 개발하여, 와그너 효과(Wagner Effect) 및 하중고 효과(Load Height Effect)가 일축 대칭 I 형보의 횡좌굴 강도에 미치는 영향을 파악하였다. 하중의 종류는 단면내 다양한 높이에 작용하는 횡방향 하중과 선형 모멘트 구배하중을 고려하였으며, 이들 하중에 의한 비지지 길이내 단일곡률의 휨과 역의 곡률의 휨이 생길때의 좌굴해석을 수행하였다. 현행 LRFD $C_{b}$ 계수의 일축 대칭 I 형 보에의 적용성을 검토하였으며, 하중고 효과(Load height effect) 및 비지지 길이내 역의 곡률(Reverse curvature bending) 발생시에 생기는 문제점들을 고찰해 보고, 해결방안을 제시하였다.

  • PDF

Modeling and fast output sampling feedback control of a smart Timoshenko cantilever beam

  • Manjunath, T. C.;Bandyopadhyay, B.
    • Smart Structures and Systems
    • /
    • 제1권3호
    • /
    • pp.283-308
    • /
    • 2005
  • This paper features about the modeling and design of a fast output sampling feedback controller for a smart Timoshenko beam system for a SISO case by considering the first 3 vibratory modes. The beam structure is modeled in state space form using FEM technique and the Timoshenko beam theory by dividing the beam into 4 finite elements and placing the piezoelectric sensor/actuator at one location as a collocated pair, i.e., as surface mounted sensor/actuator, say, at FE position 2. State space models are developed for various aspect ratios by considering the shear effects and the axial displacements. The effects of changing the aspect ratio on the master structure is observed and the performance of the designed FOS controller on the beam system is evaluated for vibration control.