• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.234-235
• /
• 2013

PV cell model은 PV simulator를 제작하거나 시뮬레이션 Software를 통하여 PV 발전시스템을 분석하기 위하여 필요하다. PV cell의 I-V 특성곡선은 PV cell의 특성을 결정짓는 중요한 요소이며, 전기적으로 다이오드정수($I_o$, $v_t$)와 광전류원($I_{ph}$) 그리고 직렬저항($R_s$) 및 션트저항($R_{sh}$)으로 모델링 가능하다. 광 전류원은 일사량에 비례하여 그 값을 추정할 수 있으나 나머지 변수인 다이오드정수($I_o$, $v_t$)와 직렬저항($R_s$) 및 션트저항($R_{sh}$)은 제조사 데이터시트에서 제공하는 3개의 대표적인 운전점인 개방회로 전압($V_{oc}$), 단락회로 전류($I_{sc}$), 그리고 최대출력에서의 전압/전류($V_{MPP}/I_{MPP}$)를 기초로 수학적으로 해를 구하여야만 한다. 본 논문에서는 저자가 제안하는 K-알고리즘의 수학적 도출 과정과 수치해석적 특성을 고찰한다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2161-2163
• /
• 1999

Generally, ZnO varistors have dynamic characteristics that the cut-off voltage increases as the time to crest of the varistor current decreases. Dynamic characteristics of ZnO varistor are the most important factor in region of the steep front discharge current particularly. Also, V-I characteristics of ZnO varistor have hysterisis loop in time domain and frequency dependency. This paper deals with ZnO varistor numerical equation and modeling method which takes the behavior of varying clamping voltage into consideration during the time to crest, in range of $1{\mu}m{\sim}50{\mu}m$, of impulse current applied to a ZnO varistor. The simulated results by the proposed model are compared with experimental results for each of the impulse current.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.943-946
• /
• 2003

This paper proposes new SPICE Macro-Model of MTJ(Magnetic Tunnel Junction). This Macro-Model has five I/O terminals, reproduces MR characteristics including hysteresis and behaves correctly to time varying input signals. Furthermore, this Model can be easily modified to various MTJs with different characteristics by simply varying internal parameters.

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.22-27
• /
• 1994

Design of potentiostat and I-V converter for micro pO2 sensor is described. Also, The operation of the designed circuit, in connection with the eqivalent model of micro pO2 sensor, is simulated. The potentiostat showed low output resistance of $l.1k{\Omega}$ and input voltage range of $-3{\sim}2.5V$. And the I-V converter showed low input resistance of $30{\Omega}$ and good linearity between input and output.

• Phonetics and Speech Sciences
• /
• v.6 no.4
• /
• pp.27-36
• /
• 2014

This study provided longitudinal examination of the Chinese learners' acquisition of Korean vowels. Specifically, I examined the Chinese learners' Korean monophthongs /i, e, ɨ, ${\Lambda}$, a, u, o/ that were created at the time of 1 month and 12 months, tried to verify empirically how they learn by dealing with their mother tongue, and Korean vowels through dealing with pattern of the Perceptual Assimilation Model (henceforth PAM) of Best (Best, 1993; 1994; Best & Tyler, 2007) and the Speech Learning Model (henceforth SLM) of Flege (Flege, 1987; Bohn & Flege, 1992, Flege, 1995). As a result, most of the present results are shown to be similarly explained by the PAM and SLM, and the only discrepancy between these two models is found in the 'similar' category of sounds between the learners' native language and the target language. Specifically, the acquisition pattern of /u/ and /o/ in Korean is well accounted for the PAM, but not in the SLM. The SLM did not explain why the Chinese learners had difficulty in acquiring the Korean vowel /u/, because according to the SLM, the vowel /u/ in Chinese (the native language) is matched either to the vowel /u/ or /o/ in Korean (the target language). Namely, there is only a one-to-one matching relationship between the native language and the target language. In contrast, the Chinese learners' difficulty for the Korean vowel /u/ is well accounted for in the PAM in that the Chinese vowel /u/ is matched to the vowel pair /o, u/ in Korean, not the single vowel, /o/ or /u/.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.197-208
• /
• 1999

In this paper, we proposed a multimedia hardware architecture for video-conferencing in view of the multimedia data flow. By simulating the architecture model, we analyzed the bottleneck of multimedia data flow, varying video size, frame rate, number of participants, and video data compression rate. To confirm the simulation results, we also implemented and tested the architecture that almost includes the analyzed requirements for video- conferencing. From the analysis of I/O system, we found the considerations in designing a multimedia I/O system.

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.66-70
• /
• 1996

Aliphatic esters of protocatechuic acid (PA, 1), vanillic acid (VA, 9) and gallic acid (GA, 18) were prepared and their anti-thrombotic effects were evaluated in the mouse model of thrombosis. The aliphatic groups included methyl, ethyl, n-propyl, i-propyl, n-butyl, i-butyl, n-amyl and cyclohexyl. n-Amyl ester of PA (7), i-propyl and cyclohexyl esters of VA (13 and 17 respectively) and ethyl ester of GA (20) treatment significantly lowered the death rate and increased the recovery from paralysis due to the thrombotic challenge. From the limited analogs available, it was tentatively concluded that the structural conformation, where carboxy oxygen (=O or -O) of the carboxyl group (COOH) at $C_1$ and the oxygen function at $C_3(either\; OH\; or\; OCH_3)$ are closely situated, is favorable for the esters of PA, VA and GA to be more antithrombotic.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.45-49
• /
• 2011

The blow-down oxidizer feed system with self-pressurizing $N_2O$ has more advantages than the regulated system. However, it is difficult to predict the exhaust flow rate because there exist two phases in the $N_2O$ tank - liquid phase and gas phase, and the properties of $N_2O$ in storage tank are varied continuously during blow-down. In this paper, a method that can analyse simply the blow-down oxidizer feed system is studied. The properties of saturated $N_2O$ are found from the NIST data base, and mass flow through the orifice is modeled as NHNE. Cold flow test with hybrid rocket combustor is performed for the comparison where the results should found from the good agreement.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.178-184
• /
• 1999

We have measured I-V characteristics of Bi$_2Sr_2CaCu_2O_{8+{\delta}}$ mesa containing a small number of intrinsic stacked Josephson junctions in a magnetic field. We fabricated mesa with an area of 40${\times}$40 ${\mu}$m$^2$ containing 3${\sim}$20 intrinsic junctions. We applied magnetic field perpendicular to He CuO$_2$ planes up to 5T. We observed flux-flow branches and flux-flow steps in the I-V characteristics which might be due to collective motion of Josephson vortices in the long junction limit. In a parallel field, critical current I$_c$ varies as I$_c$(B) ${\sim}$ exp(-B/B$_0$), where B$_0$ is about 2T, which is consistent with the theoretical model. DC and AC intrinsic Josephson effects are also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.519-523
• /
• 2013

When atomic layer deposition (ALD) is performed on a porous material by using an organometallic precursor, minimum exposure time of the precursor for complete coverage becomes much longer since the ALD is limited by Knudsen diffusion in the pores. In the previous report by Min et al. (Ref. 23), shrinking core model (SCM) was proposed to predict the minimum exposure time of diethylzinc for ZnO ALD on a porous cylindrical alumina monolith. According to the SCM, the minimum exposure time of the precursor is influenced by volumetric density of adsorption sites, effective diffusion coefficient, precursor concentration in gas phase and size of the porous monolith. Here we modify the SCM in order to consider undesirable adsorption of byproduct molecules. $TiO_2$ ALD was performed on the cylindrical alumina monolith by using titanium tetrachloride ($TiCl_4$) and water. We observed that the byproduct (i.e., HCl) of $TiO_2$ ALD can chemically adsorb on adsorption sites, unlike the behavior of the byproduct (i.e., ethane) of ZnO ALD. Consequently, the minimum exposure time of $TiCl_4$ (~16 min) was significantly much shorter than that (~71 min) of DEZ. The predicted minimum exposure time by the modified SCM well agrees with the observed time. In addition, the modified SCM gives an effective diffusion coefficient of $TiCl_4$ of ${\sim}1.78{\times}10^{-2}\;cm^2/s$ in the porous alumina monolith.