• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.158-163
• /
• 1985

The anodic oxidations of the Silver(I) / Silver(II) / Silver(III) system have been studied in aq. 2M $AgNO_3$ solution with Platinum and Carbon electrodes. It has been found that $Ag_7O_8NO_3$ can be produced at relatively higher current density. Deposited black Oxy-salt were analyzed with several methods such as oxidizing power, X-ray powder diffraction patterns, thermal analysis, and reduction curves. It decomposed to AgO upon being suspended in boiling water. AgO compound obtained from $Ag_7O_8NO_3$ were purer and denser than Alfa-product AgO.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.18-25
• /
• 2016

Virtualized hardware resources provides efficiency in use and easy of management. Based on the benefits, virtualization techniques are used to build large server clusters and cloud systems. The performance of a virtualized system is significantly affected by the virtual machine scheduler. However, the existing virtual machine scheduler have a problem in that the I/O response is reduced in accordance with the scheduling delay becomes longer. In this paper, we introduce the Loan/Redemption mechanism of a virtual machine scheduler in order to improve the responsiveness to I/O events. The proposed scheme gives additional credits for to virtual machines and classifies the task characteristics of each virtual machine by analyzing the credit consumption pattern. When an I/O event arrives, the scheduling priority of a virtual machine is temporally increased based on the analysis. The evaluation based on the implementation shows that the proposed scheme improves the I/O response 60% and bandwidth of virtual machines 62% compared to those of the existing virtual machine scheduler.

• The KIPS Transactions:PartA
• /
• v.13A no.6 s.103
• /
• pp.517-524
• /
• 2006

In cluster computers, it is essential to Implement the single I/O space(SIOS) supporting integrated I/O substructure to efficiently process I/O intensive applications. SIOS service provides with global I/O address space to directly access peripherals and hard disks in its own or remote nodes from any node in the cluster computer In this thesis, we propose the implementation method of SIOS in Linux clusters by using only freewares. This method is implemented at device driver level that uses Enhanced Network Block Device(ENBD) and file system level that uses S/W RAID and NFS. The major strengths of this method are easiness of implementation and almost no cost due to using freewares. In addition, since freewares used are open sources, it is possible to apply this method to other platforms with only slight modification. Moreover, experiments show that I/O throughputs are up to 5.5 times higher in write operations and approximately 2.3 times higher in read operations than those of CDD method that uses the device driver developed at kernel level.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.57-64
• /
• 2019

Recently, avionics systems are being developed as integrated modular architecture applying the modular integration design of the functional unit to reduce maintenance costs and increase operating performance. Additionally, a partitioning operating system based on virtualization technology was used to process various mission control functions. In virtualization technology, the CPU processing load distribution is a key consideration. Especially, the uncertainty of the I/O processing time is a risk factor in the design of reliable avionics systems. In this paper, we examine the influence of the I/O processing method by comparing and analyzing the CPU processing load by the I/O processing method through use of case analysis and applying it to the example of spatial-temporal partitioning.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.330-336
• /
• 1992

Four distinctive hot pressed and heat treated S${i_3}{N_4}$ceramics, S${i_3}{N_4}$-8%${Y_2}{O_3}$, S${i_3}{N_4}$-6% ${Y_2}{O_3}$-2% $A{l_2}{O_3}$, S${i_3}{N_4}$-4% ${Y_2}{O_3}$-3% $A{l_2}{O_3}$, 그리고 S${i_3}{N_4}$-1% MgO-1% Si$O_2$(in wt%), were prepared and characterized by X-ray diffraction, scanning electron microscopy, image analysis and mechanical tests. The fracture toughness of S${i_3}{N_4}$-8% ${Y_2}{O_3}$specimens containing large elongated grains showed the highest value of about 9.8MPa$m^{1/2}$. Two out of four S${i_3}{N_4}$, ceramics(S${i_3}{N_4}$-6% ${Y_2}{O_3}$-2% $A{l_2}{O_3}$and S${i_3}{N_4}$-4% ${Y_2}{O_3}$-3% $A{l_2}{O_3}$) heat treated at 200 $0^{\circ}C$retained the fracture strength of over 900MPa and fracture toughness of over 8.0MPa$m^{1/2}$. Large ${\beta}$-S${i_3}{N_4}$grains having a diameter larger than 1${\mu}$m appeared to contribute to increase in fracture toughness.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.4
• /
• pp.148-159
• /
• 2005

We propose a technique for finding the worst case response time (WCRT) of a DMA request that is needed in the schedulability analysis of a whole real-time system. The technique consists of three steps. In the first step, we find the worst case bus usage pattern of each CPU task. Then in the second step, we combine the worst case bus usage pattern of CPU tasks to construct the worst case bus usage pattern of the CPU. This second step considers not only the bus requests made by CPU tasks individually but also those due to preemptions among the CPU tasks. finally, in the third step, we use the worst case bus usage pattern of the CPU to derive the WCRT of DMA requests assuming the fixed-priority bus arbitration protocol. Experimental results show that overestimation of the DMA response time by the proposed technique is within $20\%$ for most DMA request sizes and that the percentage overestimation decreases as the DMA request size increases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2017

This paper presents an optimized adoption of NVM for the storage system of heterogeneous applications. Our analysis shows that a bulk of I/O does not happen on a single storage partition, but it is varied significantly for different application categories. In particular, journaling I/O accounts for a dominant portion of total I/O in DB applications like OLTP, whereas swap I/O accounts for a large portion of I/O in graph visualization applications, and file I/O accounts for a large portion in web browsers and multimedia players. Based on these observations, we argue that maximizing the performance gain with NVM is not obtained by fixing it as a specific storage partition but varied widely for different applications. Specifically, for graph visualization, DB, and multimedia player applications, using NVM as a swap, a journal, and a file system partitions, respectively, performs well. Our optimized adoption of NVM improves the storage performance by 10-61%.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.596-605
• /
• 2001

In this paper we propose a method, called the range-based cube partitioning (RCP)method for reducing I/O cost of cube computation in OLAP The method improves I/O performance of cube partitioning process by overlapping some computation between partitioning stages. For overlapping the computation, the method partitions the cube based on the ranges of attribute values, not the points of attribute value, Through analysis any experiments, we show the performance of the proposed method with comparison of the previous cube partitioning method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.257-260
• /
• 2008

SSD는 하드디스크와 다른 구조를 갖고 있으며, 단편화된 잦은 쓰기 연산에 취약하다는 점 등 기존의 환경과는 차이가 있기 때문에 이런 환경에서 발생하는 연산, 특히 I/O 연산에 대한 분석이 필수적이다. 기존의 I/O 연산 측정도구로 사용되던 벤치마크를 이용하여 SSD의 성능을 측정할 경우에는 상위단계에서의 읽기, 쓰기, 성능만 분석되기 어렵기 때문에 하위단계에서 실제로 SSD상의 I/O연산의 수행 성능을 정확히 측정하기 어렵다. SSD는 내부 저장 알고리즘의 효율성에 따라서 성능 차이가 크기 때문에 정확한 성능을 측정할 수 있는 분석 도구가 필요하다. 본 논문에서는 SSD상에서의 I/O연산의 계층적 분석을 위한 모듈을 제안한다.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2004.05a
• /
• pp.48-56
• /
• 2004

To perform R&D program, it is necessary to invest input factor(I/F). And these factor are converted to output factors(O/F) at the end of R&D program. Pee. reviewers evaluate output factors and produce evaluation grades(E/G). This paper try to analyze the relationship to I/F, O/F and E/G, According to the analysis results, the relation between I/F and E/G is as weak as the relation between O/F and E/G. The strength of relationship is relatively very strong in the relation between I/F and O/F