• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.30-35
• /
• 2004

A numerical study of underexpanded jet and impingement on a wall mounted at various distances from the nozzle exit is presented. The 3-dimensional Wavier-Stokes equations and κ-ω turbulence equations are solved. The grids are constructed as overlapped grid systems to examine the distance effect. The DADI method is applied to obtain steady-state solutions. To avoid numerical instability such as the carbuncle phenomena that sometimes accompany approximate Riemann solver, the HLLE+ scheme is employed for the inviscid flux at the cell interfaces. A goal of this work is to apply a number of two-equation turbulence models based on the w equation to the impinging jet problem.

• 정보기술과데이타베이스저널
• /
• 제3권2호
• /
• pp.25-38
• /
• 1996

병렬 데이타베이스 소프트웨어 구조 중 공유 디스크 구조는 트랜잭션간의 병렬도 향상, 적재 균형 용이, 데이타 재할당 용이 등의 장점을 가지고 있어 병렬 데이타베이스 구조 중 가장 효율적인 성능이 기대되고 있다. 그러나 공유 디스크 구조는 동시성/응집성 제어를 위한 추가적인 메세지의 증가로 네트워크 트래픽이 증가되는 문제를 가지고 있으며 이러한 문제를 완화시키고자 하는 연구가 계속되고 있다. 본 논문에서는 공유 디스크 구조의 동시성/응집성 제어를 위한 추가적인 메세지를 감소시키는 기법을 제안하고, 기존 기법과의 비교를 위해 성능 모델을 제시하였으며, 이를 통한 시뮬레이션을 수행하여 성능을 분석하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.139-145
• /
• 2004

A numerical study of underexpanded jet and impingement on a wall mounted at various distances from the nozzle exit is presented. The 3-dimensional Navier-Stokes equations and $\kappa-\omega$ turbulence equations are solved. The grids are constructed as overlapped grid systems to examine the distance effect. The DADI method is applied to obtain steady-state solutions. To avoid numerical instability such as the carbuncle that sometimes accompany approximate Riemann solver, the HLLE+ scheme is employed for the inviscid flux at the cell interfaces. A goal of this work is to apply a number of two-equation turbulence models based on the $\omega$ equation to the impinging jet problem.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.81-87
• /
• 1990

Fatigue crack closure levels based on the behavior of residual displacements on crack surfaces, are determined analytically according to the microscopic crack closure mechanisms, i.e., whether the first contact of crack surfaces takes place at the very crack tip or on the surfaces near the tip. The comparative analysis on the two models is carried out empirically by the constant amplitude fatigue tests on 2024-T3 aluminum alloy plate, and it shows that under negative stress ratio, the case of the first contact at crack tip gives better agreement with the experimental results than the other.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.87-87
• /
• 1990

Fatigue crack closure levels based on the behavior of residual displacements on crack surfaces, are determined analytically according to the microscopic crack closure mechanisms, i.e., whether the first contact of crack surfaces takes place at the very crack tip or on the surfaces near the tip. The comparative analysis on the two models is carried out empirically by the constant amplitude fatigue tests on 2024-T3 aluminum alloy plate, and it shows that under negative stress ratio, the case of the first contact at crack tip gives better agreement with the experimental results than the other.

• 산업공학
• /
• 제15권4호
• /
• pp.364-373
• /
• 2002

This paper developed an operating software for the manufacturing cell of a model plant. The model plant, which was manufactured by Fishertechnik, consists of an assembly cell, a machining cell, and supplementary material handling equipments. Each I/O module of the model plant communicates with the INTERBUS controller devices via High-level Language Interface(HLI). The machining center has two machining cells, which consists of 4 machines respectively, two 3-axis portal transporters, and a rail guided vehicle(RGV). The Petri-Net was used to investigate the dynamics of each machining cell, e.g., the relation of material handling equipments and machines. The operating software was analyzed and designed by Object Oriented Technique. The software was implemented using Delphi 3.0 under Windows 95/NT operating system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (3)
• /
• pp.235-237
• /
• 2001

본 논문의 웹 서버 디렉터는 웹 서버의 앞단에 설치되어 과부하 상태에서 서버의 성능 감소를 막는 역할을 한다. 본 논문을 통해 구현된 웹 서버 디렉터는 기존의 아파치와 같은 웹 서버의 수정 없이 그대로 사용하기 때문에, 그 동안 개발되어 온 웹 서버 모듈과 부가 기능을 모두 사용할 수 있는 장점이 있다. 또한, 서버의 I/O 모델로 가장 이상적이라고 검증된 단일 프로세스와 이산사건처리 방식을 채택하여, 일반 웹 서버에 비하여 최고 1.6배의 성능 향상을 보인다 부가적으로 SYN Flooding 과 같은 악의적인 웹 요청에도 견고한 특성을 보인다.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.74-78
• /
• 2003

The structural property of phenolic and non-phenolic lignin has an effect on the reaction rate of lignin by oxygen and chlorine dioxide respectively. Moreover, the undesirable degradation of cellulose followed by lignin degradation is influenced by chemical charge and reaction time. In this paper, several lignin model compounds were used to illuminate the interaction of oxygen and chlorine dioxide by varying the position of O and D(OD, DO, ODO and DOD), and gas chromatography method was used to investigate the degradation of lignin by determining the content of methoxyl groups in lignin. It was shown that structural properties of lignin models were more influential on the degradation and demethylation of lignin than the above combination. Combination of oxygen and chlorine dioxide, however, was more effective in degradation of lignin than only one stage, and three stages than two stages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.420-423
• /
• 2001

In this paper, the Multi-FNNs(Fuzzy-Neural Networks) architecture is identified and optimized using HCM(Hard C-Means) clustering method and genetic algorithms. The proposed Multi-FNNs architecture uses simplified inference and linear inference as fuzzy inference method and error back propagation algorithm as learning rules. Here, HCM clustering method, which is carried out for the process data preprocessing of system modeling, is utilized to determine the structure of Multi-FNNs according to the divisions of input-output space using I/O process data. Also, the parameters of Multi-FNNs model such as apexes of membership function, learning rates and momentum coefficients are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is used to achieve a sound balance between approximation and generalization abilities of the model. To evaluate the performance of the proposed model we use the time series data for gas furnace and the NOx emission process data of gas turbine power plant.

• 전자통신동향분석
• /
• 제14권2호통권56호
• /
• pp.26-37
• /
• 1999

ATM 프로토콜 적합성 시험 생성 도구 개발을 프로토콜 개발 통합환경과 연계하여 개발한다. 즉 생성된 I/O FSM 중간모델을 대상으로 연구된 가장 짧은 길이의 시험 스위트(test suite)를 생성하는 알고리즘을 편리하고 용이하게 적용하기 위해 데이터 구조화 및 컴퓨터 내에서의 표현 등을 위한 초기화 작업기능을 SDL Editor & Simulator를 활용하여 확인한다. 그리고 ATS(Abstract Test Suite) 생성은 UIO 시퀀스를 결정하고, TUT와 도착상태의 UIO 시퀀스를 결합한 시험 subsequence 생성과 symmetric argumentation 과정을 거처 RCP(Rural Chinese Postman) Tour 생성 알고리즘 구현을 통해 완전 시험 스위트 생성도구를 개발하고, 프로토콜 검정기와 연계하여 통합된 환경에서 사용할 수 있도록 개발한다.