• Speech Sciences
• /
• v.8 no.3
• /
• pp.201-208
• /
• 2001

The purpose of the study was to examine a method most pertinent to measure subglottic air pressure. Subglottic air pressure and loudness analyses were performed on vowels /a/, /i/ and consonant /p/ in 12 normal subjects using. Aerophone II voice function. The experimental contexts were, therefore, /i:pi:pi:/ and /a:pa:pa:/. The subjects produced the intervocalic /p/ in 4 different situations: 1) /i:pi:pi:/ with voiceless /p/, 2) /i:pi:pi:/ with voiced /p/, 3) /a:pa:pa:/ with voiceless /p/, and 4) /a:pa:pa:/ with voiced /p/. A t-test and a correlation analysis revealed the following results. First, when we measured subglottic air pressure by /i:pi:pi:/, voiceless /p/ was significantly different from voiced /p/. Second, when we measured subglottic air pressure by /a:pa:pa:/, voiceless /p/ was significantly different from voiced /p/. Therefore, it was concluded that voiceless /p/ produced more accurate subglottic air pressure and clinicians needed to have patients produce accurate /p/ when measuring subglottic air pressure using Aerophone II.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.87-100
• /
• 1989

해양구조물의 원통형 조인트에 대한 파괴역학적 피로수명 산출방법이 개발되었다. 개발된 방법을 이용해서 2평면 K형 조인트에 대한 피로수명을 구체적인 파괴역학적 방법으로 산출 하였다. 이 분석을 위해 용접부위 표면균열의 응력확대 계수를 3차원 유한요소법에 의해 계산하였다. 계산된 결과에 의하면 용접부위 표면균열 첨단은 단순한 Mode I형태를 보이지 않고 Mode I, II, III이 복합된 형태임이 입증되었다. 계산된 응력확대 계수를 사용해서 16개의 용접부위균열 성장형태를 일반적인 피로균열 성장법칙을 적용해서 계산하였고, 균열성장의 안정분석을 통해 각 균열의 최종 파괴상태를 파괴해석도면(failure assessment diagram)법을 이용해서 계산하였다.

• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.47-53
• /
• 2008

Purpose : The serum levels of total insulin-like growth factor (IGF)-I and IGF binding protein (IGFBP)-3 reflect endogenous growth hormone (GH) secretion in healthy children. Free form of IGF-I which is suggested to have more potent biological action than complex form of IGF-I. The aim of this study is to investigate the serum levels of free IGF-I and its clinical value in healthy children. Methods : Serum levels of total IGF-I and IGFBP-3 were determined in 494 healthy children (248 boys and 246 girls) by RIA and IRMA. Serum level of free IGF-I was determined in 206 healthy children (103 boys and 103 girls) by IRMA. Results : The free IGF-I level increased with age in both sex. The free IGF-I level increased continuously between 7 and 15 years of age in boys, but decrement was noted after 14 years of age in girls. Serum total IGF-I level also increased with age in similar pattern of that of free IGF-I. There were no significant differences of mean values of the ratio of free IGF-I/total IGF-I in relation to age in both sex. And there were significant correlations between the level of free IGF-I and total IGF-I and the ratio of total IGF-I/IGFBP-3, respectively. Conclusion : In healthy children, serum free IGF-I increased with age in both sex and high free IGF-I level may play an important role in pubertal growth spurt. Our results suggest that the increased serum free IGF-I level in puberty may reflect changes in total IGF-I rather than IGFBP-3. But free IGF-I does not have more clinical value than total IGF-I because of no significant differences of mean values of the ratio of free IGF-I/total IGF-I in relation to age.

• Korean Journal of Logic
• /
• v.22 no.1
• /
• pp.183-209
• /
• 2019

In this paper, I first examine Reiss'(2005) arguments for the causal instrumental variable. Second, I argue that the conditions for causal transitivity I consider meet what the causal instrumental variables and the interveners of the manipulation theory of causation are intended to hold. Reiss shows that two conditions for instrumental variables are not sufficient for causal significance of independent variables for dependent variables. Reiss articulates and reformulates the conditions for instrumental variables in terms of the conditions on causality, while naming his instrumental variables as causal instrumental variables. Reiss argues that the causal instrumental variables are similar to the interveners of the manipulation, or intervention theory of causation. He further argues that the causal instrumental variables do a better job the interveners do. I argue that the conditions for causal transitivity I consider meet the goal the conditions for the causal instrumental variables and the conditions for the interveners both are intended to achieve.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.33-42
• /
• 2022

In the existing intelligent command control system study, the analysis results of the commander's battlefield situation questions are provided from knowledge-based situation data. Analysis reporters write these results in various expressions of natural language. However, it is important to analyze situations about information and intelligence according to context. Analyzing the battlefield situation using artificial intelligence is necessary. We propose a virtual dataset generation method based on battlefield simulation scenarios in order to provide a dataset necessary for the battlefield situation analysis based on artificial intelligence. Dataset is generated after identifying battlefield knowledge elements in scenarios. When a candidate hypothesis is created, a unit hypothesis is automatically created. By combining unit hypotheses, similar identification hypothesis combinations are generated. An aggregation hypothesis is generated by grouping candidate hypotheses. Dataset generator SW implementation demonstrates that the proposed method can be generated the virtual battlefield situation dataset.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.1
• /
• pp.35-41
• /
• 2014

Trihalomethanes (THMs) are formed as a results of the reaction of residual chlorine, used as a disinfectant in drinking water, with the organic matter in raw water. Although chlorinated and brominated THMs are the most common disinfection byproducts (DBPs) reported, iodinated THMs (I-THMs) can be formed when iodide is present in raw water. I-THMs have been usually associated with several medicinal or pharmaceutical taste and odor problems and is a potential health concern since they have been reported to be more toxic than their brominated and chlorinated analogs. Currently, there is no published standard analytical method for I-THMs in water. An automated headspace-gas chromatography/electron capture detector (GC/ECD) technique was developed for routine analysis of 10 THMs including 6 I-THMs in water samples. The optimization of the method is discussed. The limits of detection (LOD) and limits of quantification (LOQ) range from 12 ng/L to 56 ng/L and from 38 ng/L to 178 ng/L for 10 THMs, respectively. Matrix effects in river water, sea water and wastewater treatment plant (WWTP) final effluent water were investigated and it was shown that the method is suitable for the analysis of trace levels of I-THMs, in a wide range of waters. The method developed in the present study has the advantage of being rapid, simple and sensitive.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2003

CsI single crystals doped with lithium, potassium or rubidium were grown by using Czochralski method at Ar gas atmosphere. The energy resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 14.5%, 15.9% and 17.0% for $^{137}Cs$(0.662 MeV), respectively. The energy calibration curves of CsI(Li), CsI(K) and CsI(Rb) scintillators were linear for $\gamma$-ray energy. The time resolutions of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators measured by CFT(constant-fraction timing method) were 9.0 ns, 14.7 ns and 9.7 ns, respectively. The fluorescence decay times of CsI(Li:0.2 mole%) scintillator had a fast component and slow one of ${\tau}_1=41.2\;ns$ and ${\tau}_2=483\;ns$, respectively. The fluorescence decay times of CsI(K:0.5 mole%) scintillator were ${\tau}_1=47.2\;ns$ and ${\tau}_2=417\;ns$. And the fluorescence decay times of CsI(Rb:1.5 mole%) scintillator were ${\tau}_1=41.3\;ns$ and ${\tau}_2=553\;ns$. The phosphorescence decay times of CsI(Li:0.2 mole%), CsI(K:0.5 mole%) and CsI(Rb:1.5 mole%) scintillators were 0.51 s, 0.57 s and 0.56 s, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.113-119
• /
• 2005

The methods that are used for receiving data from attached devices under real-time preemptive multi-task operating system (OS) by general processors can be categorized as polling and interrupt driven. The technical approach to these methods may be different due to the application specific scheduling policy of the OS and the programming architecture of the flight software. It is one of the most important requirements on the development of the flight software to process the data received from satellite subsystems or components with the exact timeliness and accuracy. This paper presents the analysis of the I/O method of device related scheduling mechanism and the reliable data I/O methods between processor and devices.

• Composites Research
• /
• v.32 no.6
• /
• pp.327-334
• /
• 2019

The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.199-207
• /
• 2001

In the present study the cure behavior of diglycidyl ether of bisphenol-A(DGEBA) using an anhydride-based hardener in the presence of N,N-dimethyl benzyl amine (BDMA) or 1-cyanoethyl-2-ethyl-4-methyl imidazole (2E4MZ-CN) as an accelerator has been monitored and interpreted from the viewpoint of photophysical properties by means of fluorescence spectroscopy. To do this, 1,3-bis-(1-pyrene)propane (BPP) was well incorporated in the epoxy resin system by mechanical blending. The BPP probe, which is very sensitive to conformational change of the molecule influenced by the surrounding medium, successfully formed intramolecular excimer fluorescence. It is susceptible to the micro-viscosity or local viscosity and molecular mobility according to the epoxy cure. The cure behavior was explained with monomer fluorescence intensity ($I_{M}$ ), excimer fluorescence intensity ($I_{E}$ ) and $I_{M}$ /$I_{E}$ ratio as a function of cure time, cure temperature and accelerator. The present work agreed with the previous report on the cure behavior of an epoxy-anhydride system studied using DSC or torsion pendulum method. This study also suggests that the use of fluorescence technique may provide information on cure behavior of a thermosetting resin in a low temperature region, which has not been well interpreted by other analytical methods.