• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.158-161
• /
• 1991

A new analytical expression for the temperature variation characteristics of hydrogenerated amorphous silicon (a-si:H) thin film transistors, between 223K and 433K, is presented and experimentally virified. The result show that the experimental transfer and output characteristics at several temperatures are easily modeled between $-50^{\circ}C\;and\;90^{\circ}C$. The model is based on three function obtained from the experimental data of $I_D$ versus $V_G$. Theoretical results comfirm the simple form of the model in terms of the device geometry. It was determined that as the temperature increaseed, the saturated drain current increased.

• 산업공학
• /
• 제15권4호
• /
• pp.364-373
• /
• 2002

This paper developed an operating software for the manufacturing cell of a model plant. The model plant, which was manufactured by Fishertechnik, consists of an assembly cell, a machining cell, and supplementary material handling equipments. Each I/O module of the model plant communicates with the INTERBUS controller devices via High-level Language Interface(HLI). The machining center has two machining cells, which consists of 4 machines respectively, two 3-axis portal transporters, and a rail guided vehicle(RGV). The Petri-Net was used to investigate the dynamics of each machining cell, e.g., the relation of material handling equipments and machines. The operating software was analyzed and designed by Object Oriented Technique. The software was implemented using Delphi 3.0 under Windows 95/NT operating system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.731-736
• /
• 2002

Impact is the most common type of dynamic loading conditions that give rise to impulsive forces and affects the vibrational characteristics of mechanical systems . Since the real impact force and acceleration at the contact surface are measured indirectly through the sensors, the measured outputs can be a little different from the real impact responses. In this study, the contact force model based on the Hertz law is proposed in order to predict the impact force correctly. To investigate the influence of the position of the sensor attached to the impacting bodies, the two kinds of sensors were used. Finally, the contact force model obtained by drop test was applied to predict the impact force between the moving part and the stopper in magnetic contactor.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.127-132
• /
• 2001

A numerical study was carried out to investigate the combustion phenomena in a model Scramjet engine, which had been experimentally studied in the University of Tokyo using a high-enthalpy supersonic wind tunnel. The main airflow was 2.0 in Mach number and the total temperature of hot flow was 1800K. Equivalence ratio was set to be rather higher value of 0.26 than that of experiment to investigate the effect of strong precombustion shock. The results showed that self-ignition occurred at the rear bottom wall of the combustor and combined with the shear layer flame between fuel jet and main airflow. Then, precombustion shock was generated at the step location and reversely enhanced the mixing and combustion process behind the shock. Due to the high equivalence ratio, the precombustion shock moved upstream of the step compared with that of experiment.

• 유공압시스템학회논문집
• /
• 제2권3호
• /
• pp.12-17
• /
• 2005

This paper presents a theoretical study of the delivery flow ripple produced by a swash plate type hydraulic piston pump for the purpose of developing a computer simulation program capable of predicting the pump source flow ripple accurately at the design stage. Particular attention has been paid to the development of the theoretical model by clarifying quantitatively the design influences of key parts of valve plate such as relief groove and pre-compression/expansion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1039-1041
• /
• 1999

Recently Advanced Static Var Compensators(ASVC) or STATic Synchronous COMpesator(STATCOM) has been considered as a next generation reactive power controller. [2] STATCOM is a voltage source inverter(VSI) based static VAr compensator with only small capacitors on the do side. The main function of the STATCOM is to keep the bus voltage magnitude at the desired value. [1] This paper compares the PAM STATCOM with PWM STATCOM. The characteristics and the control method of each model is analyzed. And the simulation of STATCOMs based on the above two methods was presented.

• 전자통신동향분석
• /
• 제17권5호통권77호
• /
• pp.119-128
• /
• 2002

최근 호텔, 커피숍, 레스토랑, 컨벤션 센터 등 유동 인구가 잦은 이른바 핫 스팟이라고 불리우는 지역에서 IEEE 802.11b와 같은 무선 랜 기술을 활용하여 가입자들에게 고속 무선 네트워크 접속 서비스를 제공하는 사업자들이 전세계적으로 점차 늘어나고 있다. 아직까지는 특정 사업자의 핫 스팟으로 서비스 가능 지역이 제한되어 있기 때문에 가용성이 낮아 앞으로 통신 서비스의 주류로 성장하기에는 어려움이 많을 것으로 예상되지만, 무선 랜은 고속 전송 속도와 넓은 서비스 커버리지 그리고 고속 이동성을 동시에 만족시키는 4세대 이동 통신 기술이 개발되기 전까지, 당분간 유선과 무선 기술 간의 가교 역할을 수행할 것으로 기대되고 있다. 따라서 본 고에서는 최근 국내에서도 큰 주목을 받고 있는 공중 무선 랜 서비스의 특성 및 비즈니스 모델을 분석하고, 각 지역별 서비스 사업자들의 동향을 파악함으로써 앞으로의 시장 발전 가능성을 탐색해 보고자 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.115-121
• /
• 2010

Cavitating flow is widely shown in many engineering systems, such as marine propellers, pump impellers, nozzles, injectors, torpedoes, etc. The present work focuses on the numerical analysis of the multiphase flow around the underwater vehicle which was launched from a submarine. The governing equation is the Navier-Stokes equation with a homogeneous mixture mode. The multiphase flow solver uses an implicit preconditioning scheme in curvilinear coordinate. For the code validation, the results from the present work are compared with the existing experimental and numerical results, and a reasonably good agrements are obtained. The multiphase flow around an underwater vehicle is simulated which includes submarine wake effects.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.345-358
• /
• 2003

Jindong bay at the northwestern part of Jinhae bay suffers from the occurrence of red tides in summer every year. In order to study the management methods of coastal environments, an ecological numerical model has been developed. The model experiments was forecasted that the load of nutrients from the land and field concentration will be cut down per 10% each. When we cut down 57.2% nitrogen load in the inner bay and 38.4% phosphorous load in the outer bay of bottom layer of the nutrients load from land and field concentration, the seawater quality standard levels up first grade. When we cut down 86.5% nutrients in the inner bay and 93.0% nutrients in the outer bay, the concentration of chlorophyll a decreases below 3.2 $\mu\textrm{g}$/(equation omitted)(an individual concentration of phytoplankton : 10,000cel1/ml), i.e. the red tides do not occur.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.275-276
• /
• 2006

An intelligent arm-wrestling system is recently developed in our laboratory that is comprised of an arm-force generation mechanism and a control system that detects the maximum arm-force of a user in the early stage of the match, generates a different game scenario each time, and executes force feedback control to implement the scenario. This paper presents the mathematical model of the force control system of the intelligent arm-wrestling system, and some improvements of it via experimental frequency responses using a control signal analyzer.