• Polymer Science and Technology
• /
• v.7 no.4
• /
• pp.377-383
• /
• 1996

• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.354-355
• /
• 1992

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.17-23
• /
• 1997

A methodology for on-line data reconciliation and optimization has been proposed to minimize the energy cost of a utility system. As industrial data tend to be corrupted by noise or gross error, fast and robust data reconciliation technique is essential for the on-line optimization of utility system. Thus, we propose the hierarchical decomposition approach that can be applicable to on-line data reconciliation and optimization. As this approach divides whole system into several subsystems and removes the nonlinearity of constraint systematically, it handles complexity of system easily and shows good performance in accuracy and computation speed. Through case studies, we prove that this methodology is a good candidate for on-line data reconciliation and optimization.

• Elastomers and Composites
• /
• v.28 no.4
• /
• pp.267-273
• /
• 1993

A number of hydrophilic acrylic comonomers were incorporated into styrene-butadiene soap-free emulsion polymerization. It was found that reaction rate decreased according to : AN>AA>MMA>EA>IA>AAM>MA>HEMA. It was also observed that reaction rate increased with decreasing H-bonding factor contribution to the solubility parameter of the hydrophilic comonoer. The SBR latexes were very monodisperse with the particle size distribution of $1.03{\times}1.12$. Since growth rate is proportional to polymerization time, the difference in conversion rates between various comonomers was resulted from the particle number density of SBR latexes for the various hydrophilic comonomers. It was also found that the colloidal stability of the latexes was excellent because no external emulsifier was incorporated.

• Clean Technology
• /
• v.15 no.1
• /
• pp.54-59
• /
• 2009

In this study, the separation of water/bitumen emulsion was investigated by chemical demulsification method. Motor oils (GS Caltex Deluxe Gold V 7.5W/30, Hyundai gear oil 85W/140) and asphalt (AP-5, KS M 2201, Dongnam Petrochemical MFG. Co.) were used as model oils in the preliminary experiments to effectively remove water from water/bitumen emulsion. The bitumen extracted from Canadian oilsands was used in this study. The water/oil emulsion was not separated without demulsifiers, and Hyundai motor oil showed higher efficiency of water separation at a low concentration of demulsifier compared with that for GS Caltex motor oil. However, as the concentration increased, the efficiency did not rapidly increase compared with that of GS Caltex motor oil. It was highly speculated that the water phase of Hyundai motor oil was not dispersed well compared with that of GS Caltex motor oil because the viscosity of Hyundai motor oil was much higher than that of GS Caltex motor oil. The demulsifier of higher HLB (hydrophilic - lipophilic balance) value had high separation efficiencies in water/oil emulsion. The TWEEN 20 (polyoxyethylene sorbitan monolaurate solution) showed better separation efficiency than other demulsifiers.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.263-275
• /
• 2013

M&A is an important strategic decision made to ensure the competitiveness of companies and cases of M&A have been increasing in recent years. But the success of an M&A is not assured. In order to succeed, there should first be a well managed strategic leadership by the CEO and an integration strategy. Companies need also to overcome the resistance to change among members. A successful example of an M&A is that of LG Chem and Hyundai Petrochemical. By using this M&A as a case study, the influence of the CEO's Strategic Leadership, and the Integration Strategy on Resistance, Acceptance and Performance were assessed. For this study, research was conducted on CEO Strategic Leadership and Integration Strategy before members of LG Chem (DAESAN PLANT) were interviewed on the M&A's implementation by LG Chem's HR staff, management and members. The results show that CEO strategic leadership and the integration strategy are major change drivers and that they are important to the early stabilization of M&A companies. Finally, suggestions are made as to how such success may be replicated for other companies undergoing M&A in the future.

• Elastomers and Composites
• /
• v.43 no.3
• /
• pp.183-190
• /
• 2008

In this study, we have investigated mechanical properties and scratch resistance of polypropylene compounds by two types of masterbatch with different molecular weight of PP. Masterbatches were prepared with polypropylene(PP) and polydimethylsiloxane(PDMS) by melt mixing. Mechanical properties and scratch behavior were examined with UTM and polarizing microscope. The morphology surface of grain pattern was investigated Color 3D Laser Scanning Microscope. Mechanical properties of two masterbatches containing PP compounds showed a little bit difference in accordance with amount of M/B. Scratch resistance was much improved by adding masterbatches used high-molecular weight PP. Scratch resistance was excellent when grain pattern of the surface is deep, large, round and irregular.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.156-163
• /
• 2009

Our objective is to increase the flowability of Polypropylene(PP) compounds and achieve flow mark free surface in injection molded specimen. We have investigated flowabilities of PP compounds which were composed of PP, rubber, talc, and trace amount of additives. Flowability measurement was performed with four types PPs of which molecular weight distributions(MWD) and melt indexes(MI) were different. Rheological properties of the PP compounding materials, such as spiral flow(SF) length, MI, and shear viscosity, were evaluated. When PP with the broad MWD was used, there were remarkable cases where the spiral flow length of low MI PP compound was longer than that of higher MI PP compound. The PP compound having low MI but broad MWD PP has more flowability than the compound with only high MI.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.284-290
• /
• 1993

The soap-free emulsion polymerization was carried out for Styrene/Butadiene system with Acrylonitrile as hydrophilic comonomer and KPS as initiator. Under the condition of below 50% conversion, the dependence of Rp on $[AN]^n$ and $[KPS]^n$ was found to be n=1.617-1.050 and n=0.83-0.96 for [AN] and [KPS], respectively. The effect of $[AN]^n$ and $[KPS]^n$ on particle number density (Np) was determined to be n=1.533 and n=0.733, respectively. The highest conversion was obtained under the conditions of pH=5 and ratio of total monomer (g) to water (g)=0.5. The mechanical properties of SBR obtained in this experiment were shown to be inferior to commercial SBR in terms of tensile strength, 300% modulus and elongation. It was found that cure rate of SBR prepared in this experiment was faster than that of commercial SBR.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.