• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1060-1064
• /
• 2002

We have studied the effect of crystallization temperature, composition and film thickness, which are the fundamental processing parameters of lead zirconate titanate(PZT) thin film fabrication, in the respect of the piezoelectric properties by our pneumatic loading method(PLM). A great deal of research has been done in the field of characterization for piezoelectric thin films after the first report on the measurement for the piezoelectric coefficient of thin films in 1990. Even though the piezoelectric properties of thin films are very critical factors in the micro-electro mechanical system(MEMS) and thin film sensor devices, a few reports for the piezoelectric characterization are provided for the last decade unlikely the bulk piezoelectric devices. We have found that the piezoelectric properties of thin films are improved as the increase of crystallization temperature up to 750$\^{C}$ and this behavior can be also explained by the analysis of dielectric polarization hysteresis loop, X-ray diffraction and scanning electron microscopy. The effect of Zr/Ti composition has been also studied. This gives us the fact that the maximum piezoelectricity is found near Morphotropic Phase Boundary(MPB) as bulk PZT system does.

• 한국광학회지
• /
• 제15권5호
• /
• pp.409-414
• /
• 2004

본 논문에서는 광섬유 장주기 격자를 이용한 센서 신호처리 시스템을 구현하였다. SLD와 Fabry-Perot 필터를 이용한 동조 반도체 광원과 Fabry-Perot 필터내의 PZT의 히스테리시스 특성을 보상하기 위한 에탈론 필터를 사용하였으며, 절대적인 기준 파장을 제공하기 위하여 온도 안정화된 광섬유 브래그 격자를 사용하였다. 시스템에서 검출된 신호를 A/D 변환하여 컴퓨터로 입력하고 신호 처리하여 결과를 모니터상에 표시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1530-1532
• /
• 1994

This paper describes the discharge characteristics of liquid nitrogen for plane-plane, needle-plane electrode at variation of gap spacing at atmospheric pressure. The important results obtained from this study are as follows. (1) Breakdown voltage of $LN_2$ for needle-plane electrode is higher than that of for plane-plane electrode and discharge duration tine is longer with increase of gap spacing at atmospheric pressure. (2) The formation of bubbles by evaporation is observed in spite of non-applying source at atmospheric pressure and the creation of corona confirmed for plane-plane electrode results from the bubbles. (3) The applied voltage-discharge magnitude( V-Q) characteristics of $LN_2$ showed hysteresis and the discharge magnitude decreasing and corona voltage increasing proportional to the pulse per second at atmospheric pressure.

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.124-128
• /
• 2009

Magnetic nanoparticles were synthesized by using the sonochemical method with oleic acid as a surfactant. The average size of the magnetite nanoparticles was controlled by varying the ratio R=[$H_2O$]/[surfactant] in the range of 2 to 9 nm. To prepare chitosan-coated magnetite nanoparticles, chitosan solution was added to a magnetite colloid suspension under ultrasonication at room temperature for 20 min. The chitosan-coated magnetite nanoparticles were characterized by several techniques. Atomic force microscopy (AFM) was used to image the chitosan-coated nanoparticles. Magnetic hysteresis measurement was performed by using a superconducting quantum interference device (SQUID) magnetometer to investigate the magnetic properties of the magnetite nanoparticles and the chitosan-coated magnetite nanoparticles. The SQUID measurements revealed the superparamagnetism of both nanoparticles. The T1- and T2-weighted MR images of these chitosan-coated magnetite colloidal suspensions were obtained with a 4.7 T magnetic resonance imaging (MRI) system. The chitosancoated magnetite colloidal suspensions exhibited enhanced MRI contrasts in vitro.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.194-198
• /
• 2010

In our present work, we developed a GMI (giant magnetoimpedance) sensor system to detect magnetic fields in the milli gauss range based on the asymmetric magnetoimpedance (AGMI) effect in Co-based amorphous ribbon with self bias field produced by field-annealing in open air. The system comprises magnetoimpedance sensor probe, signal conditioning circuits, A/D converter, USB controller, notebook computer, and program for measurement and display. Sensor probe was constructed by wire-bonding the cobalt based amorphous ribbon with dimensions $10\;mm\;{\times}\;1\;mm\;{\times}\;20\;{\mu}m$ on a printed circuit board. Negative feedback was used to remove the hysteresis and temperature dependence and to increase the linearity of the system. Sensitivity of the milli gauss meter was 0.3 V/Oe and the magnetic field resolution and environmental noise level were less than 0.01 Oe and 2 mOe, respectively, in an unshielded room.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.112-116
• /
• 2002

A sensorless control strategy for permanent magnet synchronous motors is presented in this paper. A speed control scheme based on the measurement and observation of stator current, voltage. and flux vector is proposed. Two phase voltages and two stator currents are measured and processed in discrete form in DSP. The rotor position and speed are estimated through the stator flux and its derivative estimation. Flux and its derivative are calculated in the stationary reference frame and used to estimate the speed and position. The rotor position angle is then used in a microcontroller to produce the appropriate stator current command signals for the hysteresis current controller of the inverter. The closed-loop speed control has been shown to be effective from standstill to rated speed. Moreover, a flux drift problem caused by the integration can be eliminated so that a stable sensorless starting and running operation can be achieved. Computer simulation and experimental results are presented to demonstrate the effectiveness of the proposed scheme.

• 센서학회지
• /
• 제5권6호
• /
• pp.60-67
• /
• 1996

저온 remote PECVD $SiO_{2}$막을 이용하여 제조된 InSb MIS구조에서의 계면의 전기적 특성에 대하여 연구하였다. $105^{\circ}C$에서 증착시킨 $SiO_{2}$막을 이용한 MIS구조의 중간 에너지 대역폭에서의 계면상태밀도가 $1{\sim}2{\times}10^{11}\;cm^{-2}eV^{-1}$으로 평가되었다. 그러나, $105^{\circ}C$이상의 고온에서 제조된 MIS소자의 계면에는 다량의 계면준위 및 트랩 준위가 존재하였다. G-V측정으로부터 계산된 계면준위들의 시상수는 $10^{-4}{\sim}10^{-5}\;sec$였으며, 증착온도가 증가할수록 트랩밀도가 증가하여 C-V특성곡선의 이력특성이 증대되었다.

• Tribology and Lubricants
• /
• 제35권5호
• /
• pp.294-299
• /
• 2019

Most previous studies on water repellent surfaces using lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, these methods have the disadvantages of high cost and low efficiency. In this study, we implement a hydrophobic surface using a high-power general-purpose diode laser. We have fabricated the microsurface using laser groove processing technology, and we present the correlation of wettability characteristics with space and width. The metal material is stainless steel (SUS 304), and the groove height during laser processing is set to $30{\mu}m$ to evaluate the wettability based on the gap and width of various grooves. Results show that the contact angle of the groove-shaped surface is increased by $40^{\circ}$ or more as compared with the surface without patterning, and the contact angle in the parallel direction is greater than that in the perpendicular direction. Results from contact angle hysteresis measurement experiments show that the groove width has a greater influence on the contact angle history than does the gap between grooves. In addition, the coating reveals that the contact angle can be increased using a chemical method and that the laser grooving process can further improve the wetting properties of the surface.

• 대한토목학회논문집
• /
• 제38권6호
• /
• pp.831-838
• /
• 2018

본 논문에서는 합류부 배수영향을 받는 지점에서 유량을 산정할 수 있는 방법을 제안하였다. 먼저, 최근 2개의 홍수사상에 대한 HEC-RAS 부정류 모의를 수행하여 모형을 보정하였으며, 관심구간 상하류 수위와 유량과의 관계 그래프를 작성하고 크리깅 보간을 수행함으로써 HPG (Hydraulic Performance Graph)를 작성하였다. 대상 홍수기간 동안 HPG와 상하류 연속 수위 자료를 이용하여 구간 유량을 산정하였고, ADVM 같은 자동유량측정 자료와 비교하여 비교적 잘 일치하는 것을 확인하였다. 본 연구결과는 수위-유량 관계곡선의 이력현상이 큰 배수영향 구간에서 유량을 산정하는데 경제적이고 실용적인 방법을 제공할 것이다.