• 전기학회논문지
• /
• 제56권1호
• /
• pp.66-70
• /
• 2007

For the design to prevent the saturation of the iron core and the effective fault current limitation, the analysis for the operation of the flux-lock type superconducting fault current limiter (SFCL) with consideration for the hysteresis characteristics of the iron core is required. In this paper, the hysteresis characteristics of the flux-lock reactor, which is an essential component of the flux-lock type SFCL, were investigated. Under normal condition, the hysteresis loss of the iron core in the flux-lock type SFCL does not happen due to its winding structure. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. From the analysis for both the hysteresis curves and the fault current limiting characteristics due to the number of turns for the 1st and 2nd windings, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.277-283
• /
• 1996

The temperature dependent characteristics of hydrogenerated amorphous silcon thin film transistor (a-Si:H TFT) with a bottom gate of N-Type <100> Si wafer were investigated. Drain current on the hysteresis characteristic curve showed an exponential variation. Hysteresis area of TFT increased with the gate voltage increased and decreased with the small gate voltage. According to the variation of gate voltages, drain current of TFT increased by temperature increase, and hysteresis characteristics mainly depended on the temperature increase. The hysteresis current showed negative characteristics curve over 383K. The hysteresis occurance area and the differences of forward and reverse sweep were increased at the higher temperature. Hysteresis current of I$_{d}$(on/off) ratio decreased at the lower temperature and increased at the higher temperature.e.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.69-74
• /
• 2001

The Wells turbine has hysteresis characteristics in a reciprocating flow. In this paper, in order to understand unsteady flow characteristics of the Wells turbine, a sinusoidal flow condition is simulated. The flow conditions and hysteresis characteristics, including blade thickness, are investigated over a period of time. The pressure distributions along the blade surface are investigated at mid-span to clarify the cause of the hysteresis. The result has shown that the hysteresis characteristics become more pronounced as blade thickness becomes larger. The occurrence of these characteristics depends on the varying behavior of wakes between an accelerating flow and a develerating flow.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.162-167
• /
• 2005

The purpose of this paper is to improve the hysteresis characteristics of a stack type piezoelectric actuator using system identification and tracking control. Recently, several printing methods that are cost less and faster than previous semiconductor processes have been developed for the production of electric paper and RFID(Radio Frequency IDentification). The system proposed in this study prints by spraying the molten metal. And this system consist of a nozzle, heating furnace, operating actuator and an XYZ 3-axis stage. As an operating system, the piezoelectric(PZT) actuator is a very useful tool for position control of the metal printing system. However, the PZT actuator has a hysteresis nonlinearity due to the ferroelectric characteristics of the PZT element. This hysteresis causes problem position control characteristics in the system and deteriorates the performance of the system. In this study, an investigation was conducted to improve the hysteresis characteristics of the PZT actuator that has an output displacement for the input voltage. In order to reduce the hysteresis nonlinearity of the PZT actuator, this proposed a inverse hysteresis model and a mathematic modeling method that can express the geometric relationship between voltage and displacement. In addition, system identification and PID control methods were examined. Also, it was confirmed that the proposed control strategy gives good tracking performance.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.44-50
• /
• 1998

This paper describes the simulation of the levitation force between permanent magnet and high Tc(critical temperature) superconductor(HTSC). Levitation force is evaluated numerically on the basis of the magnetic vector potential method and the critical state model. The superconductor is approximated to 2-D slab model. By performing computations, the following characteristics have been investigated: the process of the generation of hysteresis, the various hysteretic behaviors. The characteristics of hysteresis are important for the application to magnetic bearing, for the damping and the nonlinear stiffness is related to hysteresis.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.164-168
• /
• 2010

The transformer is expected to be an essential component of a superconducting fault current limiter (SFCL) for both the increase of its voltage ratings and the simultaneous quench due to different critical current between high-$T_C$ superconducting (HTSC) elements comprising the SFCL. However, in order to perform the effective current limiting operation of the SFCL, the design for the SFCL considering the hysteresis characteristics of the iron core is required. In this paper, the influence of the hysteresis characteristics of the iron core comprising the transformer type SFCL on its current limiting characteristics was investigated. Through the comparative analysis on the hysteresis curves due to the ratio of the turn number between the 1st and the 2nd windings of the transformer, the proper design condition for the ratio of the turn number to achieve the effective current limiting operation of the transformer type SFCL could be obtained.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.35-39
• /
• 2005

This paper presents a method to reduce hysteresis in multilayer ceramic actuator by connecting the actuator with a capacitor in a series circuit. The change in hysteresis with respect to the capacitor was examined. $0.2Pb(Mg_{1/3}Nb_{2/3})O_3-0.8Pb(Zr_{0.475}Ti_{0.525})O_3$ ceramic material was used as a piezoelectric material for the actuator. Displacement of the actuator was measured in a capacitive gap sensor measuring system. In case of inserting a capacitor in a total circuit, hysteresis became dramatically decreased, and then finally the hysteresis value can be reduced below $0.2\%$. It was found in this present study that reducing the hysteresis in the actuator is dependent upon the characteristics of the capacitor in total circuit and also operating frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.15-17
• /
• 1995

Hysteresis motor is a synchronous machine which has simple structure and self-start characteristic but also has serious difficulties in numerical analysis. In this study, a finite element analysis for hysteresis motor considering the hysteresis characteristics is presented. The hysteresis model is the magnetization-dependent Preisach model which explains hysteresis phenomena very well. From this, we estimate the instantaneous torque, average torque and hysteresis loss of the rotor, considering slot and winding distribution.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.3-9
• /
• 2009

AMOLED 디스플레이는 LCD에 비해 넓은 시야각, 빠른 응답 속도, 박막화의 용이성 등의 많은 장점들을 갖고 있으나 불균일한 TFT의 전기적 특성과 전원선의 전압 강하에 의한 휘도 불균일, 잔상 현상 및 수명 등과 같은 많은 문제점들이 있다. 이 중에서 본 논문에서는 구동 TFT 소자의 hysteresis 현상에 의해 발생하는 가역적 잔상 현상을 개선하고자 한다. TFT의 hysteresis 특성을 개선하기 위해 게이트 산화막 증착 전에 표면 처리 조건을 변경하였다. 게이트 산화막 증착 전에 실시한 자외선 및 수소 플라즈마 표면 처리는 게이트 산화막과 다결정 실리콘 박막 사이의 계면 trap 밀도를 $3.11{\times}10^{11}cm^{-2}$로 감소시켰고, hysteresis 레벨을 0.23 V로 줄였으며 출력 전류 변화율을 3.65 %로 감소시켰다. 자외선 및 수소 플라즈마 처리를 행함으로써 AMOLED 디스플레이의 가역적 잔상을 많이 개선할 수 있을 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.255-258
• /
• 2003

The hysteresis characteristics of flux-lock reactor, which is an essential component of flux-lock type superconducting fault current limiter (SFCL), was investigated. The hysteresis loss of iron core in flux-lock type SFCL does not happen due to its winding's structure especially in the normal state. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. Through the hysteresis curves together with the fault current level due to the inductance ratio for the 1st and 2nd winding, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.