• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1172-1175
• /
• 2001

Recently, vector control without a speed sensor for an inverter induction motor system has been developed. In this paper describes the vector control system estimates rotor speed based on FMRAS(Flux Model Reference Adaptive System). Because of improving the initial condition and drift problem by pure integrator is eliminated, we can be expected to rapid responsibility of the speed estimation. The stability of speed estimator is proved on the basis of hyperstability theory. Proposed control system used TMS320C31 DSP for high speed processing. The effectiveness of the proposed system is verified by simulation and experimental results. This result shows that the highly characteristic speed estimation and robust character of load regulation.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1144-1146
• /
• 2001

In this paper, describes a rotor speed identification method of induction motor based on the theory of counter EMF MRAS. This method eliminated the pure integrator and we can be expected to rapid responsibility of the speed identification. Therefore, we may improve the initial condition of the integrator and drift problem. The stability of speed estimator is proved on the basis of hyperstability theory. In order to confirm the performance of the proposed system, simulation and experiment is performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.427-431
• /
• 1996

The MRAS proposed by Schauder [8] is modified to improve robustness to the change of load torque and/or the variation of the stator resistance. The difference between the voltage and the current model is fed into the current model via proportional and integral gains. In order to generalize the MRAS, supposing that the rotor speed is time varying, we add a compensating term to the current model. It does not alter the Popov's integral inequality condition. Also, the asymptotic stability of the modified MRAS (MMRAS) is shown with the stability proof technique as in the original paper. By the simulation works, it is verified that the MMRAS obtains improved performance than the original MRAS.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.10
• /
• pp.1488-1497
• /
• 1989

In this paper, a new adaptive control scheme is proposed that uses a special form of rational function-type linear operator in the parameter adaptation and that removes the augmenting signal terms of the control input components. This adaptation scheme is applied to the MRAC of continuous-time, linear time-invariant, minimum-phase plants whose relative degrees are arbitrary. This scheme can be applied without any change of the controller structure to the adaptive systems regardless of the relative degree if it is greater than 1. And this scheme does not require any signal augmentation for arbitrary relative-degree plants if the reference model has no zeros. The asymptotic stability of the adaptive systems controlled by this scheme is shown by a hyper-stability method.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.559-559
• /
• 1989

This paper deals with the robust controller design of robot manipulator to track a desired trajectory in spite of the presence of unmodelled dynamics in cause of nonlinearity and parameter uncertainty. The approach follwed in this paper is based on model reference adaptive control technique and convergence on hyperstability theory but it does away with the assumption that process is characterized by a linear model remaining time invariant during adaptation process. The performance of controller is demonstrated by computed simulation about position and speed control of six link manipulator in case of disturbance and payload variation.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.59-69
• /
• 1989

This paper deals with the robust controller design of robot manipulator to track a desired trajectory in spite of the presence of unmodelled dynamics in cause of nonlinearity and parameter uncertainty. The approach follwed in this paper is based on model reference adaptive control technique and convergence on hyperstability theory but it does away with the assumption that process is characterized by a linear model remaining time invariant during adaptation process. The performance of controller is demonstrated by computed simulation about position and speed control of six link manipulator in case of disturbance and payload variation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.331-338
• /
• 1990

In adaptive control, the lack of persistent and rich excitation causes the estimated parameters to drift, which degrade the performance of the system and may introduces instability to the system in a stochastic environment. To solve the problem of the parameter drift, the concept of single parameter adaptation is presented. For the parameter identification, a priori error is directly used for adaptation error. The structure of the controller is based upon the minimum variance control technique. The stability and robustness analysis is carried out by the sector stability theorem for the second order system. The computer simulation is performed to justify the theoretical analysis for the various cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.135-139
• /
• 1992

Control of tool-environment interaction force to comply the robot system to an environment is of vital in many automated process. This paper presents the implementation of an adaptive force control with commercial robot system in two dimensional contour following task. A model reference adaptive control system, combined with the linear compensators, is implemented. That is, a use of adaptive control is to provide an auxiliary control system so that the contour following performance can be improved from that of using linear control system only. Hyperstability is used to derive the adaptive control law. Experimental verification of the proposed control system is obtained using PUMA 560 robot system. Data obtained experimentally shows that the use of additional adaptive control system improves the contour following performance about 30% in RMS contact force errors upon that of the system controlled by the linear compensators only.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1167-1177
• /
• 1989

In this paper, a generalized adaptive law is proposed which uses a rational function type operator for parameter adjustment. To satisfy the passivity condition of the adaptation block, we introduce a constant feedback gain into the adaptation block. This adaptation scheme is applied to the model reference adaptive control of a continuous-time, linear time-invariant, minimum-phase system whose relative degree is 1. We prove the asymptotic stability of the output error of this adaptive system by hyperstability method. It is shown that by digital computer simulations this law can give a better output error transient response in some cases than the conventional gradient adaptive law. And the output error responses for the several types of the proposed adaptation law are examined in the presence of a kind of unmodeled dynamics.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.145-155
• /
• 1990

In this paper, an adaptive Infinite Impulse Response (IIR) filter algorithm using output error method, which prevents poles of a system transfer function from being out of unit circle, is proposed, and it is proved that the proposed algorithm always satisfies hyperstability. The proposed algorithm is applied to an Adaptive Noise Canceller (ANC), and compared with a Least Square (LS) method adaptive IIR filter algorithm and an adaptive Finite Inpulse Response (FIR) filter algorithm. As a result, the validity of the proposed algorithm is proved.