• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1346-1360
• /
• 1989

본 연구에서는 기준 모델 적응제어 방식에서 직접 적응제어 방식을 사용하여 부하의 변동 및 외란이 발생할 경우에도 매니퓰레이터의 정확한 궤적의 추종 및 속도 의 실시간 제어가 가능한 적응제어시스템을 설계하고자 한다. 제2절에서는 로봇 매니퓰레이터의 기구학적 이론 및 동적 모델링에 대한 기본이론을 전개하고, 제3절 에서는 제어시스템의 설계를 위한 제어 알고리즘과 초안정(hyperstability)이론을 통한 안정성 해석을 다룬다. 그리고 제4절에서는 제안된 제어기의 성능 평가를 위해 6관절 로봇인 스탠포드 로봇 매니퓰레이터에 대한 시뮬레이션을 통한 결과를 토오크 계산법(computed torque method)에 의한 결과와 비교 검토함으로서 제안된 제어기의 성능을 예증한다.

• The Pure and Applied Mathematics
• /
• v.27 no.1
• /
• pp.51-60
• /
• 2020

In this note, we investigate the Hyers-Ulam stability and the hyperstability of the Pexider type functional equation g(x + y + xy) = g(x) + f(y) + xf(y) + yg(x).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.78-83
• /
• 1984

A method is proposed for the adaptive control of linear time varying discrete systems. The stability problem of the model reference adaptive control systems is considered by means of the properties of hypergtability, The hyperstability approach also allows for solutions to the adaptation mechanism. Employing the principles of the continuous time case with output feedback renders it to the discrete case which simplified the system design. The system response is obtained by applying the ramp and step input as a reference signal to the system respectively. With checking the adaptation time for ramp and step input the validity of proposed algorithm was confirmed by the computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.160-165
• /
• 1989

This paper deals with the robust controller design of robotic manipulator to track a desired trajectory in spite of the presence of unmodelled dynamics in cause of nonlinearity and parameter uncertainty. The approach followed in this paper is based on model reference adaptive control technique and convergence on hyperstability theory but it does away with assumption that process is characterized by a linear model remaining time invariant during adaptation process. A computer simulation has been performed to demonstrate the performance of the designed control system in task coordinates for stanford manipulator with payload and disturbances.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.463-477
• /
• 1991

This study proposed a new method to design a robot manipulator control system capable of tracking the trajectories of joint angles in a reasonable accuracy to cover with actual situation of varying payload, uncertain parameters, and time delay. The direct adaptive model following control method has been used to improve existing industrial robot manipulator control system design. The proposed robot manipulator controller is operated by adjusting its gains based on the response of the manipulator in such a way that the manipulator closely matches the reference model trajectories predefined by the designer. The manipulator control system studied has two loops: they are an inner loop on adaptive model following controller to compensate nonlinearity in the manipulator dynamic equation and to decouple the coupling terms and an outer loop of state feedback controller with integral action to guarantee the stability of the adaptive scheme. This adaptation algorithm is based on the hyperstability approach with an improved Lyapunov function. The coupling among joints and the nonlinearity in the dynamic equation are explicitly considered. The designed manipulator controller shows good tracking performance in various cases, load variation, parameter uncertainties. and time delay. Since the proposed adaptive control method requires only a small number of parameters to be estimated, the controller has a relatively simple structure compared to the other adaptive manipulator controllers. Therefore, the method used is expected to be well suited for a high performance robot controller under practical operation environments.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.148-151
• /
• 1991

This paper describes the vector control system estimates rotor speed based on MRAS(Model Reference Adaptive Control) and this estimate is used for speed feedback control. The stability of speed estimator is proved on the basis of hyperstability theory. In order to improve the performance of speed control, the load torque is estimated by load torque observer and speed controller compensates this estimate value. Thus the robust vector control system against load torque disturbance is constructed.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.17-20
• /
• 1996

An adaptive current control scheme of a permanent magnet (PM) synchronous motor with the simultaneous estimation of the magnitude of the flux linkage and stator resistance is proposed. The adaptive parameter estimation is achieved by a model reference adaptive system (MRAS) technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. The predictive control scheme is employed for the current controller with the estimated parameters. The robustness of the proposed current control scheme is compared with the conventional one through the computer simulations.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.89-96
• /
• 1997

A robust speed control scheme for a brushless DC(BLDC) motor using an adaptive input-output linearization technique is presented. By using this technique, the nonlinear motor model can be linearized in Brunovski canonical form, and the desired speed dynamics can be obtained based on the linearized model. This control technique, however, gives an undesirable output performance under the mismatch of the system parameters and load conditions. For the robust output response, the controller parameters will be estimated by a model reference adaptive technique where the disturbance torque and flux linkage are estimated. The adaptation laws are derived by the Popov's hyperstability theory and positivity concept. The proposed control scheme is implemented on a BLDC motor using the software of DSP TMS320C30 and the effectiveness is verified through the comparative experiments.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.228-231
• /
• 2000

When the vector control which does not need a speed signal from a mechanical speed sensor it is possible to reduce the cost of the control equipment and to improve the control performance in many industrial application. In this paper describes a rotor speed estimate method of induction motor based on the theory of counter EMF MRAS. This method eliminated the pure integrator. and we can be expected to rapid responsibility of the speed identification, Therefore we improve the initial condition of the integrator and drift problem. The stability of speed estimator is proved on the basis of hyperstability theory. In order to confirm the performance of the proposed system Simulation and experiment is performed.