• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.103-111
• /
• 2012

In this study, the full-scale laboratory model test on utilization of recycled aggregates and crushed stone as vertical drains to use an alternative material of sand in soft ground is performed. The settlement and pore water pressure were measured to evaluate the discharge capacity and filed application, and the results were compared and analyzed through the finite element method. The measured and estimated settlement in all vertical drain materials decreases gradually with the load increase. The measured settlement 6.55~8.63 mm, and the estimated by the Hyperbolic model was 7.45~7.92 mm. So the model used for the analysis can be applied to the settlement estimation of the actual field. The variations of pore water pressure with time showed constantly regardless of the load in all vertical drainage materials. The pore water pressure was similarity to that of sand after rapid drawdown. Therefore, it was applicable to the field because discharge capacity was enough to be an alternative material to the sand which had been being used as the vertical drains.

• Korea-Australia Rheology Journal
• /
• v.15 no.2
• /
• pp.91-96
• /
• 2003

The sensitivity of the product to the ongoing sinusoidal disturbances of the process has been investigated in the film casting of viscoelastic polymer fluids using frequency response analysis. As demonstrated for fiber spinning process (Jung et al., 2002; Devereux and Denn, 1994), this frequency response analysis is useful for examining the process sensitivity and the stability of extensional deformation processes including film casting. The results of the present study reveal that the amplification ratios or gains of the process/product variables such as the cross-sectional area at the take-up to disturbances exhibit resonant peaks along the frequency regime as expected for the systems having hyperbolic characteristics with spilt boundary conditions (Friedly, 1972). The effects on the sensitivity results of two important parameters of film casting, i.e., the fluid viscoelasticity and the aspect ratio of the casting equipment have been scrutinized. It turns out that depending on the extension thinning or thickening nature of the fluid, increasing viscoelasticity results in enlargement or reduction of the sensitivity, respectively. As regards the aspect ratio, it has been found that an optimum value exists making the system least sensitive. The present study also confirms that the frequency response method produces results that corroborate well those by other methods like linear stability Analysis and transient solutions response. (Iyengar and Co, 1996; Silagy et al., 1996; Lee and Hyun, 2001).

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.102-112
• /
• 1997

This paper describes the method that can construct kinematically admissible velocity fields for forging of gear-like components which have tooth shape around the cylinder. The kinematically admissible velo- city fields for the various gear-like components, involute spur gear, trapezoidal spline, square spline, ser- ration and trochoidal gear, were constructed by pilling up the velocity components according to the shape of tooth and billet. The billets, of hollow and solid, were Al 2218 and 2024. To verify the method, the analyses and experiments were carried out and compared with each other. For analyses, the half pitches of com- ponents were divided into several deformation regions based on their tooth profile. A neutral surface was used to represent the inner flow of material during forging. Its location varied with the energy optimazation and its contour varied with the number of teeth. In experiment, the contour of material filling up the tooth zone is hyperbolic curve caused by the frictional drag on the interface of die-wall/workpiece but, in the analysis, it is an arc which retains the same contour during all forging operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5347-5356
• /
• 2011

In this paper, we compared various shear deformation functions for modelling anti-symmetric composite sandwich plates discretized by a mixed finite element method based on the Lagrangian/Hermite interpolation functions. These shear deformation theories uses polynomial, trigonometric, hyperbolic and exponential functions through the thickness direction, allowing for zero transverse shear stresses at the top and bottom surfaces of the plate. All shear deformation functions are compared with other available analytical/3D elasticity solutions, As a result, reasonable accuracy for investigated problems are predicted. Particularly, The present results show that the use of exponential shear deformation theory provides very good solutions for composite sandwich plates.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.94-104
• /
• 2002

This paper presents a new way of texture mapping on the Genus N object constructed over a single domain. The problem of 2D texture mapping is the discontinuity of texture domain at the virtual boundary on the object. Such phenomenon decreases smoothness of the object as well as looks unnatural. Especially it is necessary for the Genus N object of infinite coninuity to apply the seamless texture mapping. For seamless texture mapping, a multiperiodic function, which transforms a discontinuous function into a continuous function, is suggested. In some applications, however, the visual seams on the textured object provide more realistic appearance. Therefore, this research supports the interactive control from the discontinuity and the continuity across the boundary using the coefficient of the weight function.

• Advances in materials Research
• /
• v.6 no.3
• /
• pp.279-301
• /
• 2017

Thermo-mechanical vibration characteristics of in homogeneousporous functionally graded (FG) micro/nanobeam subjected to various types of thermal loadings are investigated in the present paper based on modified couple stress theory with consideration of the exact position of neutral axis. The FG micro/nanobeam is modeled via a refined hyperbolic beam theory in which shear deformation effect is verified needless of shear correction factor. A modified power-law distribution which contains porosity volume fraction is used to describe the graded material properties of FG micro/nanobeam. Temperature field has uniform, linear and nonlinear distributions across the thickness. The governing equations and the related boundary conditions are derived by Extended Hamilton's principle and they are solved applying an analytical solution which satisfies various boundary conditions. A comparison study is performed to verify the present formulation with the known data in the literature and a good agreement is observed. The parametric study covered in this paper includes several parameters such as thermal loadings, porosity volume fraction, power-law exponents, slenderness ratio, scale parameter and various boundary conditions on natural frequencies of porous FG micro/nanobeams in detail.

• Earthquakes and Structures
• /
• v.13 no.6
• /
• pp.589-598
• /
• 2017

In this paper, dynamic response of the horizontal concrete beam subjected to seismic ground excitation is investigated. The structure is reinforced by $Fe_2O_3$ nanoparticles which have the magnetic properties. The hyperbolic shear deformation beam theory (HSDBT) is used for mathematical modeling of the structure. Based on the Mori-Tanaka model, the effective material properties of concrete beam is calculated considering the agglomeration of $Fe_2O_3$ nanoparticles. Applying energy method and Hamilton's principle, the motion equations are derived. Harmonic differential quadrature method (HDQM) along with Newmark method is utilized for numerical solution of the motion equations. The effects of different parameters such as volume fraction and agglomeration of $Fe_2O_3$ nanoparticles, magnetic field, boundary conditions and geometrical parameters of concrete beam are studied on the dynamic response of the structure. In order to validation of this work, an exact solution is used for comparing the numerical and analytical results. The results indicated that applying magnetic field decreases the of the structure up to 54 percent. In addition, increase too much the magnetic field (Hx>5e8 A/m) does not considerable effect on the reduction of the maximum dynamic displacement.

• Wind and Structures
• /
• v.27 no.5
• /
• pp.311-324
• /
• 2018

This work examines vibration and bending response of carbon nanotube-reinforced composite plates resting on the Pasternak elastic foundation. Four types of distributions of uni-axially aligned single-walled carbon nanotubes are considered to reinforce the plates. Analytical solutions determined from mathematical formulation based on hyperbolic shear deformation plate theory are presented in this study. An accuracy of the proposed theory is validated numerically by comparing the obtained results with some available ones in the literature. Various considerable parameters of carbon nanotube volume fraction, spring constant factors, plate thickness and aspect ratios, etc. are considered in the present investigation. According to the numerical examples, it is revealed that the vertical displacement of the plates is found to diminish as the increase of foundation parameters; while, the natural frequency increase as the increment of the parameters for every type of plate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.564-564
• /
• 2016

개념적 수문 모형은 탱크의 개수, 탱크 간 관계구조, 그리고 저류량과 유출량 간 선형/비선형 관계 정의 방식 등에 따라 다양한 형태로 개발되어왔으며, 각 모형마다 매개변수 수 및 입력 자료가 상이하다. 모형의 매개변수가 많아지면 결과가 좋게 나타날 수 있으나, 늘어난 매개변수에 대해 물리적 의미를 부여하고 해석하기가 쉽지 않다. 단순한 모형은 보정이 용이하고 그 특성상 실무에서 널리 이용되고 있으나, 물순환 구조가 복잡한 유역에 대해서는 적용성이 떨어질 수 있다. 하지만 매개변수의 수가 많은 모형이 적은 모형에 비해 항상 결과가 좋은 것은 아니다. 복잡한 모형은 부족한 안정성에 의해 보정 기간에서는 결과가 좋았으나, 검정 기간 대해 결과가 안 좋을 수도 있으며 이에 대한 평가가 필요하다. 본 연구에서는 국내에서 주로 이용되는 개념적 모형을 대상으로 모형의 복잡성과의 정확도의 관계를 비교 평가하고자 한다. 대상 모형으로는 수정 3단 Tank 모형, Im's Tank 모형, Two-Parametric Hyperbolic Model (TPHM), 그리고 Daily Watershed Streamflow Model (DAWAST)을 선정하였고, 대상유역으로는 이동저수지 상류에 위치한 2개 유역을 선정하였다. 모형 간 비교를 위한 정량적 통계적 지표로 $R^2$, Nash-Sutcliffe efficiency (NSE), root mean square error-observations standard deviation ratio (RSR), 그리고 percent bias (PBIAS)를 이용하였다. 본 연구 결과는 개념적 수문 모형에 대한 이해를 증진하고, 장기유출 해석을 위한 수문 모형의 선택 시 모형의 복잡도 및 정확도의 관점에서 도움을 줄 수 있는 기초자료로 이용될 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• v.13 no.2
• /
• pp.187-209
• /
• 2002

The infrastructure system in the United States has been aging faster than the resource available to restore them. Therefore decision for allocating the resources is based in part on the condition of the structural system. This paper proposes to use neural network to predict the overall rating of the structural system because of the successful applications of neural network to other fields which require a "symptom-diagnostic" type relationship. The goal of this paper is to illustrate the potential of using neural network in civil engineering applications and, particularly, in bridge evaluations. Data collected by the Tennessee Department of Transportation were used as "test bed" for the study. Multi-layer feed forward networks were developed using the Levenberg-Marquardt training algorithm. All the neural networks consisted of at least one hidden layer of neurons. Hyperbolic tangent transfer functions were used in the first hidden layer and log-sigmoid transfer functions were used in the subsequent hidden and output layers. The best performing neural network consisted of three hidden layers. This network contained three neurons in the first hidden layer, two neurons in the second hidden layer and one neuron in the third hidden layer. The neural network performed well based on a target error of 10%. The results of this study indicate that the potential for using neural networks for the evaluation of infrastructure systems is very good.