• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.3-5
• /
• 2001

ZnO thin films are deposited on $SiO_2$/Si (111) substrate by RF magnetron sputtering. The two-step deposition method is proposed to enhance both the c-axis orientation and the resistivity of ZnO films. This method consists of the following two procedures: the 1 st-deposition for 30 min without oxygen at l00W and the 2nd-deposition with oxygen added in the range of $O_2/(Ar+O_2)=10{\sim}50%$. Effects of thermal treatment on the properties of ZnO films are systematically investigated.

• International Journal of Contents
• /
• v.8 no.2
• /
• pp.23-27
• /
• 2012

The successful use of digital textbooks (DTs) in schools requires the development of various teaching and learning methods that are appropriate for DTs. However, recent DT studies have focused mainly on the implementation of DT features and formats. The objective of this study was to investigate a problem-based learning instructional model appropriate to DTs and to present the experimental results using the problem-based DT to demonstrate its educational effectiveness. Two learning-achievements tests were conducted to analyze the learning experience and effectiveness of the problem-based DT after it had been used in a high school for a certain period. The experimental results indicated that the students who used the DT, especially lower-level students, exhibited improved problem-solving ability and demonstrated a better practical understanding of the subject than students who used printed textbooks.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.347-351
• /
• 2012

Vermiculite-silica composites with a layered structure were fabricated by adding cellulose fibers as a pore former and by a simple uniaxial pressing and subsequent sintering process. Three different combinations of additives were used and their effects on the compressive strength and thermal conductivity of the composites were investigated. Both compressive strengths (42-128 MPa) and thermal conductivities (0.75-1.48 $W/m{\cdot}K$) in the direction perpendicular to the pressing direction (T) were higher than those (19-81 MPa and 0.32-1.04 $W/m{\cdot}K$) in the direction parallel to the pressing direction (S) in all samples. The anisotropy in both properties was attributed to the microstructural anisotropy, which was caused by the layered structure developed in the composites.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.231-236
• /
• 2012

This paper presents the MPPT(Maximum Power Point Tracking)control method of the PMSG wind generation system using the turbine model with a squirrel cage induction motor. The torque of squirrel cage induction turbine model is controlled by mathematization of speed characteristics of real blade. In this paper, maintenance and cost issues into consideration, except for previous method using information of the velocity of the wind speed sensor, the algorithm is presented. The algorithm is controlled by tracking the optimal point, the generator speed and maximum grid power. The vector controls of the generator side converter and the grid side converter are controlled respectively to obtain maximum torque and regulate unity power factor. With Psim simulations and experiments, the efficiency of squirrel cage induction turbine model and the validity of control algorithm are verified.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.370-370
• /
• 2012

성장 길이 방향으로 조성비가 점차 바뀌는 InxGa1-xAs 나노와이어에 대한 라만 산란 연구 결과를 보고한다. Si 기판 위에 Au 입자를 뿌린 후에 이를 촉매로 하여 molecular beam epitaxy 방법을 이용하여 InGaAs 나노와이어를 성장시켰다. 투과전자현미경 실험 결과에 의하면 InGaAs 나노와이어의 길이는 약 $3{\sim}5{\mu}m$, 두께는 약 20~50 nm 정도였다. 성장 길이 방향으로 조성비의 변화를 연구하기 위해서 나노와이어에 대한 공간 분해된 라만 산란 실험을 수행 하였다. 실험 결과 나노와이어의 길이 방향으로 InAs-like transverse optical (TO) phonon 에너지와 GaAs-like TO phonon 에너지의 변화가 있었으며 이를 통해 성장 길이 방향으로 In과 Ga의 조성비의 변화가 있음을 알 수 있었다. 각각의 광학 포논 에너지에 대한 분석을 통해 조성비의 변화에 대한 정량적인 수치를 얻을 수 있었다.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.599-614
• /
• 2012

Purpose: We measure service quality based on service process, and examine relationships among product quality, product and service loyalty. Methods: We develop a construct to evaluate process based service quality. We collect data from customers of auto maintenance centers to measure perceived product quality, service and product quality. We test relationships between constructs using structural equation model and regression analysis. Results: Relationships among perceived-product quality, service quality, service loyalty, and product loyalty are all significant. Conclusion: Perceived-product quality has a indirect impact through service quality and loyalty in addition to a direct impact on product loyalty.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.58.2-58.2
• /
• 2010

본 연구에서는 n-type wafer에 비정질 실리콘을 증착한 이종접합 태양전지를 열처리 방법을 이용하여 열처리의 효과를 분석함으로써 이종접합 태양전지에 효율적인 열처리 효과에 대하여 연구하였다. P, N-layer는 PECVD(Plasma-enhanced chemical vapor deposition) I-layer는 HWCVD(Hot wire chemical vapor deposition), ITO는 RF 마그네트론 스퍼터링법으로 동일한 조건에서 제작하였고 rapid thermal process를 이용하여 진공 중에서 $150^{\circ}C$, $200^{\circ}C$, $220^{\circ}C$, $250^{\circ}C$까지 열처리를 하였다. 열처리 전과 후 QSSPC로 minority carrier life time, 자외 가시선 분광분석 장치로 투과 반사도를, Ellipsometer로 흡수 계수 등의 변화를 조사하였다. 열처리 후 Minority carrier life time, Voc 및 광변환 효율이 증가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.59.1-59.1
• /
• 2010

이종접합 구조의 태양전지는 에미터 및 후면전계층으로 비정질 실리콘이 이용되고 있다. 본연구에서는 HWCVD를 이용하여 중성층 비정질 실리콘을 증착(10nm), 패시베이션된 n형 결정질 실리콘을 기판으로 PECVD법으로 에미터 층은 p형 비정질 실리콘을 후면 전계층은 n+형 비정질 실리콘을 증착하여 a-Si:H(p)/c-Si(n)/a-Si:H(n+)의 구조로 에미터 및 후면전계층의 조건에 따른 이종접합 태양전지를 제작, 특성을 분석하였다. 증착시간에 따라 에미터와 후면전계층의 두께를 조절하고 도펀트 가스(B2H6,PH3)의 유량에 따라 도핑 농도를 조절하였다. 공정 변수마다 MCLT 및 Implied Voc를 측정하였고, 태양전지 제작 후 도핑 농도에 따른 충진율을 비교, 분석하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.157-157
• /
• 2009

다층카본나노튜브(MWCNT) 를 첨가한 전력케이블용 CNT 반도전 컴파운드를 용융혼합법을 사용하여 제조하였다. 카본나노튜브, 카본블랙, 분산제, 가교조제 함량변화에 따른 초고압 CNT 반도전 컴파운드의 특성을 조사하였다. 카본나노튜브 단독, 카본나노튜브와 전도성 카본블랙을 혼용함에 따른 상승효과, 분산제와 가교조제 사용에 따른 초고압 전력케이블용 CNT 반도전 컴파운드의 우수한 물성을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3004-3008
• /
• 2012

Small molecule conjugated peptides were prepared by solid-phase synthesis as potential novel whitening agents, and their melanogenesis inhibitory activities were investigated. The conjugated small molecules were well-known materials as tyrosinase inhibitors, and peptides were selected from the sequences that are known to antagonize melanocortin receptor 1 (MC1R). Most of small molecules-peptide conjugates showed superior melanin inhibition activity to kojic acid and arbutin. Among these, almost all compounds have -AR- sequence. From this study, we concluded that the small molecule conjugated peptides containing -AR- sequence have melanogenesis inhibitory activities and have potential to be used as novel whitening agents.