• 한국결정성장학회지
• /
• 제15권4호
• /
• pp.145-151
• /
• 2005

어두운 적색을 나타내는 아프리카산 천연루비의 색상개선을 열처리법과 수열처리법을 이용하여 행한 결과, 열처리법은 색상이 떨어지는 역효과가 발생하였다. 그러나 수열처리법의 경우에는 색상과 투명도가 향상되었다. 아프리카산 천연루비의 색상개선에 대한 수열처리 조건은 다음과 같다. 즉, 수열용매 1M $Na_2CO_3-0.9M\;K_2CO_3$, 반응온도: $450^{\circ}C$, 반응 시간: 48hrs, 충전율: $30\%$, 압력: 375atm이었다. 이와 같은 조건에서 얻어진 루비의 특성을 평가한 결과, ICP/MS와 XRF 분석결과로부터 수열처리 후 $Cr^{3+},\;Fe^{3+},\;Ti^{4+}$ 등의 함량이 수열처리 전의 루비에 비해 감소됨을 알 수 있었으며, 이로 인하여 적색이 밝아지는 것을 색차계 분석결과로부터 알았다. 이 결과는 수열처리 전과 비교하였을 때 $Cr^{3+}$ 이온의 전자전이에 의해 발생되는 발광피크의 강도가 수열처리 후 감소한 PL분석결과와 잘 일치하였다.

• 한국결정성장학회지
• /
• 제14권2호
• /
• pp.73-77
• /
• 2004

수열처리법을 이용하여 저품위의 잠비아산 천연 자수정의 색상 개선을 행하였다. 수열처리 조건은 다음과 같다. 즉, 수열용매 6M-HCI, 반응온도 $300^{\circ}C$, 반응시간 30시간, 충진율 40%이었다. 이와 같은 조건에서 고품질 적자색의 자수정이 얻어졌다. ICP/AES 결과로부터 색 향상은 잠비아산 자수정의 내부에 존재하는 Fe 원소의 함량이 영향을 미치는 것을 알았다. 또한 UV-VIS-NIR분석결과 처리전 잠비아산 수정과 비교해 550nm 흡수피크가 작아짐을 볼 수 있었다. 본 연구의 결과는 수열처리가 잠비아산 자수정의 상업적인 가치 증가에 있어서 적합한 방법이었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.613-616
• /
• 2003

Effect on hydrothermal treatment of lamellar vanadium oxides was investigated and the formation of hexagonal and cubic mesophase was found. This lamellar materials were prepared by mixing of cetyltrimethylammonium-bromide and pH-controlled sodium metavanadate solution. Thermal method and UV/O₃treatment were applied to extract organic template. The structure of resulting product was studied by powder X-ray diffraction and transmission electron microscopy (TEM).

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.172-178
• /
• 2007

수평회전식 수열법에 의해 운모 분말을 합성하였다. 수열조건은 출발원료로 $K_2O,\;Al(OH)_3$ 그리고 $SiO_2$의 비는 1 : 3 : 3mol%로 하고 수열용매로 8mol%의 KOH를 함께 추가하여 $260^{\circ}C$에서 72시간 동안 반응시켰다. 합성한 분말은 수직형 수열처리법에 의한 은나노 코팅 운모 제조를 위해 사용하였다. 은나노 코팅의 처리를 위한 수열조건은 출발원료로 합성한 분말로 하고, 수열용매로 $0.5{\ell}$ 3차 증류수, 그리고 1,000ppm의 은나노 졸을 코팅원료로 사용하여 $160{\sim}260^{\circ}C$ 범위에서 72시간 동안 반응시켰다. 처리 후 결정구조, 은나노 코팅 여부 및 코팅된 운모의 특성은 XRD, SEM, TEH-EDX 및 shake plask법을 통해 분석하였다.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.57-63
• /
• 2015

Recently, Korea's municipal wastewater treatment plants generated amount of wastewater sludge per day. However, ocean dumping of sewage sludge has been prohibited since 2012 by the London dumping convention and protocol and thus removal or treatment of wastewater sludge from field sites is an important issue on the ground site. The hydrothermal carbonization is one of attractive thermo-chemical method to upgrade sewage sludge to produce solid fuel with benefit method from the use of no chemical catalytic. Hydrothermal carbonization improved that the upgrading fuel properties and increased materials and energy recovery, which is conducted at temperatures ranging from 200 to $350^{\circ}C$ with a reaction time of 30 min. Hydrothermal carbonization increased the heating value though the increase of the carbon and fixed carbon content of solid fuel due to dehydration and decarboxylation reaction. Therefore, after the hydrothermal carbonization, the H/C and O/C ratios decreased because of the chemical conversion. Energy retention efficiency suggest that the optimum temperature of hydrothermal carbonization to produce more energy-rich solid fuel is approximately $200^{\circ}C$.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.747-757
• /
• 1997

ZSM-5 zeolite composite membranes have been synthesized from a silica sol solution containing TPABr as an organic template by the dip-coating and the pressurized-coating hydrothermal treatment techniques. The CO2 separation efficiency of synthesized composite membranes was also investigated. The permeation mechanism of CO2 through ZSM-5 membranses was the surface diffusion, and that of N2, O2, and He gases was Knudsen diffusion or activated diffusion depending on the synthetic method of membranes and the measurement temperature. The CO2/N2 separation factor of the membrane prepared by the dip-coating hydrothermal treatment was 2.5 at about 12$0^{\circ}C$, while the ZSM-5 composite membrane synthesized by the pressurized-coating hydrothermal treatment technique showed the CO2/N2 separation factor of 9.0 at room temperature higher than that ever reported in the literature.

• 한국치위생학회지
• /
• 제7권4호
• /
• pp.471-479
• /
• 2007

The purpose of this study was to examine the optimum condition of impulse during the anodic spark oxidation applying pulse current as well as to find the excellent condition for HA precipitation the after electrochemical hydrothermal treatment by cathode reduction method. After anodic spark oxidation, the anodized specimen and the Pt plate connected cathode and anode, respectively. Hydrothermal treatment performed at 90, 120, $150^{\circ}C$ for 2 hours in the electrolyte containing $K_2HPO_4$, $CaCl_2{\cdot}2H_2O$, Tris(Hydroxymethyl)-$(CH_2OH)_3\;CNH_2$(Aminomethane), and NaCl. The optimum impulse voltage for anodic spark oxidation was 350V. The optimum pulse cycle measured at 10 mS. The HA crystals precipitated excellently by cathode reduction at $150^{\circ}C$ for 2 hours. The phases of anatase, rutile, and HA coating on the surface of modified titanium surface immersed in Hanks' solution for 3weeks were detected by XRD measurement and the intensity of HA crystal phase has increased by temperature and time of hydrothermal treatment. According to the our experiments, we found that Pure Ti will be good materials of bioactivity and biocompatibility.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.240-243
• /
• 2006

본 연구에서는 수열법을 이용하여 저품질의 호주산 천연 사파이어에 대한 색상개선을 행하였다. 호주산 천연 사파이어의 색상 개선에 대한 최적의 수열처리 조건은 다음과 같다. 즉, 수열반응온도 $320{\sim}350^{\circ}C$, 반응시간: 3일, 수열용매: 2 M NaOH 수용액이다. 이와 같은 조건하에서 수열 처리한 후에 투명한 색상의 호주산 천연 사파이어가 얻어졌으며 천연 사파이어 가치 차트로 비교한 결과, commercial 등급이 $middle{\sim}top$ 등급으로 색상이 개선되었음을 확인하였다.

• 청정기술
• /
• 제28권2호
• /
• pp.147-154
• /
• 2022

Titanate nanotubes (TNTs) were synthesized via alkaline hydrothermal treatment using commercial TiO₂ nanoparticles (P25). The TNTs were prepared at various TiO₂/NaOH ratios, hydrothermal temperatures, and hydrothermal times. The synthesized catalysts were characterized by X-ray diffraction, field-emission scanning electron microscopy, N₂ adsorption-desorption isotherms, field-emission transmission electron microscopy, and ultraviolet-visible spectroscopy. TNTs were generated upon a decrease in the TiO₂/NaOH ratio due to the dissolution of TiO₂ in the alkaline solution and the generation of new Ti-O-Ti bonds to form titanate nanoplates and nanotubes. The hydrothermal treatment temperature and time were important factors for promoting the nucleation and growth of TNTs. The TNT catalyst with the largest surface area (389.32 m² g^-1) was obtained with a TiO₂/NaOH ratio of 0.25, a hydrothermal treatment temperature of 130 ℃, and a hydrothermal treatment time of 36 h. Additionally, we investigated the photocatalytic activity of methyl violet 2B (MV) over the TNT catalysts under UV irradiation and found that the degradation efficiencies of the TNTs were higher than that of P25. Among the TNT catalysts, the TNT catalyst that was hydrothermally synthesized for 36 h (TNT 36 h) exhibited a 96.9% degradation efficiency and a degradation rate constant that was 4.8 times higher than P25 due to its large surface area, which allowed for more contact between the MV molecules and TNT surfaces and facilitated rapid electron transfer. Finally, these results were correlated with the specific surface area.

• 한국분말재료학회지
• /
• 제18권1호
• /
• pp.73-77
• /
• 2011

$Y(OH)_3$ nanowires were synthesized by a hydrothermal reaction of metallic Y with aqueous solution of LiOH. The morphology and the size of the nanowires changed with varying the volume of the LiOH solution inside the autoclave. $Y(OH)_3$ nanowires transformed to $Y_2O_3$ by a subsequent heat-treatment without morphological change. By a proper control of hydrothermal reaction parameter and heat-treatment, the yield of pure $Y_2O_3$ nanowires up to 97% was attained.