• 전기학회논문지P
• /
• 제58권4호
• /
• pp.526-531
• /
• 2009

This paper suggests the dehydration and RDF(Refuse Derived Fuel) production of organic sludge, livestock manure and sewerage sludge causing environmental problems, with hydrothermal pre-treatment process. The renewable technology from the organic wastes must involve short treatment time required, reusable energy source, anti-odor and viruses, low cost for the treatment, and well-fertilization. The hydrothermal pre-treatment process promotes to evaporate moisture in the sludge after being shortly treated in a reactor, which is supplied steam and heat by an external boiler, due to the pressure with steam breaks the cell walls of the sludge, so this process removes the internal moisture of the cell. Then, the treated sludge(solid-state) is mixed with waste vinyls called RDF(6,706kcal/kg).

• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.439-446
• /
• 2009

This paper investigates the dehydration and RDF (Refuse Derived Fuel) production of organic wastes, livestock manure and sewerage sludge with pressurized hydrothermal treatment process. The renewable technology for the organic wastes must involve short treatment time required, reusable energy source, anti-odor and viruses, low cost for the treatment, and well-fertilization. The pressurized hydrothermal treatment process promotes to evaporate moisture in the waste after being shortly treated in a reactor, which uses steam and heat supplied by an external boiler. By the pressurized steam, the cell walls of the waste break and effectively release the internal moisture. Then, the dried waste can be mixed with waste vinyls to produce RDF with a higher heating value as high as 6,700 kcal/kg.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 고분자리싸이클링 심포지엄
• /
• pp.3-12
• /
• 2006

The main feature of these total technologies is that we can constitute the optimum treatment scheme fitting to the property of wastes, amount of wastes and energy requirement. For high moisture content wastes or biomass resources, high pressure steam process (MMCS) for crush, dry and deodorize wastes to produce high quality fertilizer of fuel is most appropriate. For dry or semi-dry solid wastes, the STAR-MEET system can be applied to produce low-BTU gases for power generation using duel fueled diesel engines of Stirling engines, and the REPRES and HyPR-MEET systems can be applied to produce hydrogen rich medium-BTU gas. For waste plastics and oils, liquefaction technology is best fit to produce light oil or kerosene equivalent fuel oils. These total technologies are completely different from the existent waste treatment technologies based on land-filling or incineration, and are expected to disseminate all over the world in the near future.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.306-314
• /
• 2005

In this study, spherical $pre-BaTiO_3$ particles are prepared by gelation and aging process in autoclave without catalysts. The (Ba-Ti) gel used as a starting material was prepared by aging mixtures of titanyl acylate with barium acetate aqueous solution([glacial acetic acid (AcOH)]/[titanium isopropoxide (TIP)] 4, [barium acetate]/[TIP] 1) at $45^{\circ}C$ for 48hrs. XRD and SEM results for the (Ba-Ti) gel sample at aging process showed that the gel was formed via aggregation of the fine particles. It seems to be the primary particles of bulk (Ba-Ti) gel amorphous, but the spatial arrangement of barium and titanium in the (Ba-Ti) gel is similar to that in crystalline $BaTiO_3$ particles. From XRD and FT-IR. spectroscopy analysis it was found that the crystal structure of the prepared particles continuously transformed from amorphous to tetragonal as the calcination temperature increased, and crystallized spherical cubic and tetragonal $BaTiO_3$ powder obtained at the very low calcination temperature between $500^{\circ}C$ and $900^{\circ}C$ after 1hrs of heat treatment respectively. According to BET analysis result, final particle have pore structure of ink bottle shape which is produced by aggregation of fine spherical particles with surface area of $280m^2/g$ and average pore size of 130nm.

• 청정기술
• /
• 제25권1호
• /
• pp.74-80
• /
• 2019

하수슬러지의 열화학적 처리는 수분을 제거하여 연료로 사용되는 하수슬러지의 수분 함량을 낮추어 주는 기술이다. 열화학적 처리된 하수슬러지는 열량이 높아지기 때문에 에너지 집약적 과정이라고 할 수 있다. 이러한 공정 중에 소비되는 에너지를 절약하기 위해 하수슬러지의 수열 탄화 공정을 사용하였다. 수열탄화 공정은 하수슬러지를 사전 건조 없이 깨끗한 고체연료로 전환할 수 있다. 본 연구는 수열탄화 하수슬러지와 미분탄 연소 시스템의 혼소 특성을 조사하는 것을 목적으로 한다. 혼소 시 생성되는 유해물질 및 연소 효율의 변화를 측정하는 것을 목적으로 한다. 본 연구에 사용 된 연소 시스템은 $80kW_{th}$급 연소로로서 1기의 선회류 버너가 장착되어 있다. 두 가지의 석탄을 주 연료로 사용하였고, 하수슬러지의 혼소율은 열량 기준 0% ~ 10%까지 진행하였다. 실험 결과 $NO_x$는 400 ~ 600 ppm, $SO_x$는 600 ~ 700 ppm 사이를 유지하였고, CO는 100 ppm 전후로 일정하게 유지되어 안정적인 연소를 확인할 수 있었다. 하수슬러지를 혼소할 경우, 혼소율이 증가할수록 $NO_x$와 $SO_x$의 배출량도 증가하였으나 그 편차가 크지 않았다. 연소 배가스에 포함된 오염 물질 배출은 혼소 비율 보다 주 연료인 석탄의 조성에 의해 크게 영향을 받는 것으로 밝혀졌다.