• 드라이브 ㆍ 컨트롤
• /
• 제11권1호
• /
• pp.1-7
• /
• 2014

This paper presents a novel concept of wave energy converter for electric generation from the ocean wave energy. In this paper, a Multi-Point Absorbing Wave Energy Converter, shortened as MPAWEC by using Secondary Control Hydrostatic Transmission (SCHST) was proposed. The power take-off (PTO) system in the proposed MPAWEC includes multi heaving buoys to drive hydraulic pumps placed at different points. The application of SCHST in MPAWEC gives some advantages, such as longevity of hydraulic components; more energy is harvested; the variation of the pressure in the accumulator limited; therefore the accumulator volume is reduced and the output speed is more stable, etc. A PID controller was designed for speed control of the hydraulic motor. The simulation results indicated that the speed of the generator was ensured with the relative error as 0.67%; the efficiency of the proposed system was 71.4%.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.34-42
• /
• 2022

Hydrostatic transmission (HST) comprises rotary parts, shafts, valve plate, swashplate, and servo pistons. Ensuring structural stability of each part of an HST has a significant impact on product safety. In this study, the structural stability of HST in agricultural machinery and industrial vehicles was analyzed using ANSYS software. For conservative evaluation, high-pressure conditions (35.5 MPa and 2 MPa pilot pressure) were applied as load conditions. The number of grids used in the calculations ranged from 0.4 to 0.8 million depending on modeling requirements. Structural analysis was performed for essential parts and safety factor was analyzed. All major parts of HST had a safety factor of ≥ 1.5. Thus, they were judged to be structurally safe. This study provides important information for designing an HST system.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.327-338
• /
• 2001

This paper presents the results of a structural analysis to determine design variables such as the inner basket array type, and thicknesses of the outer shell, and lid and bottom of a spent nuclear fuel disposal canister. The canister construction type introduced here is a solid structure with a cast iron insert and a corrosion resistant overpack, which is designed for the spent nuclear fuel disposal in a deep repository in the crystalline bedrock, entailing an evenly distributed load of hydrostatic pressure from the groundwater and high swelling pressure from the bentonite buffer. Hence, the canister must be designed to withstand these high pressure loads. Many design variables may affect the structural strength of the canister. In this study, among those variables, the array type of inner baskets and thicknesses of outer shell and lid and bottom are attempted to be determined through a linear structural analysis. Canister types studied hear are one for the pressurized water reactor (PWR) fuel and another for the Canadian deuterium and uranium reactor (CANDU) fuel.

• 한국식품영양과학회지
• /
• 제36권11호
• /
• pp.1444-1450
• /
• 2007

대추술의 가열살균으로 인한 품질저하를 개선하고자 초고압(500 MPa, 5분) 및 냉동처리($-20^{\circ}C$에서 3일간 냉동 후 $20^{\circ}C$에서 4시간 동안 해동)를 이용하여 대추술을 살균한 다음 가열처리구($63^{\circ}C$, 10분) 및 시판대추술과 비교하면서 품질특성을 조사하였다. 미생물은 초고압 및 시판대추술에서는 검출되지 않았고, 가열처리구에서는 세균류만이 10 CFU/mL 이하로 검출되었으며, 냉동처리구에서는 $10^2{\sim}10^3CFU/mL$ 수준으로 검출되어 $30{\sim}60%$의 살균효과를 보였다. 초고압, 냉동 및 가열처리는 대추술의 pH, 산도, 아미노산도, 환원당 및 에탄올함량 등의 성분에 유의적인 영향을 미치지 않았으나, 색도에는 유의적으로 영향을 미쳤으며 변화폭은 초고압 처리가 가장 작았고 다음으로 가열 및 시판, 냉동처리 순으로 크게 나타났다. 관능검사 결과에서는 가열처리 시 신맛 및 화한 맛이 감소하면서 전체적인 품질이 낮아진 데 비하여, 초고압 및 냉동처리 시에는 신맛과 화한 맛이 변하지 않으면서 품질이 유지되었다. 한편 시판 대추술에서는 탄내, 단내 및 단맛이 뚜렷이 증가하고 신내 및 신맛이 감소하면서 가장 낮은 품질을 보였다. 이상으로부터 초고압처리는 살균효과가 우수하고 제품의 성분 및 색도에 큰 영향을 미치지 않으면서 본래 대추술의 관능적인 특성을 최대 유지 할 수 있는 효과적인 비열살균법임을 알 수 있었고, 냉동처리 역시 관능적으로 받아들일 수 있는 수준으로 품질이 유지되었으나 불완전한 살균으로 인한 저장성 연구가 추가되어야 할 것이다.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.147-155
• /
• 2009

외부 수압을 받는 필라멘트 와인딩 후판 복합재 원통의 좌굴 및 파손을 유한요소법과 시험으로 연구하였다. 자체 개발 프로그램인 ACOS와 상업용 프로그램인 MSC.NASTRAN(선형)과 MSC.MARC(비선형)를 이용한 유한요소해석을 수행하였다. 복합재 원통 시편은 T700 카본-에폭시로 필라멘르 와인딩 기법에 의해 $[\pm30/90]_{FW}$, $[\pm45/90]_{FW}$, $[\pm60]_{FW}$, $[\pm60/90]_{FW}$의 각도로 제작하여 수압시험을 수행하였다. 사용한 세 가지 프로그램 중 ACOS가 시험값과 1.7~14.3%의 차이를 보이며 좌굴 압력을 가장 잘 예측하였다. 모든 경우에 좌굴 후 지지하중이 초기 좌굴하중보다 커지지 못하고 최종파손으로 연결되었다.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.148-157
• /
• 1995

This study deals with controlling the speed of Hydrostatic Transmission (HST) system throuth the control of pumping stroke of positive displacement pump using high-speed solenoid valve controlled by digital closed loop PWM method. The method which was done in this study is as follows: First, we modified original positive displacement pump and designed pumping stroke control system of HST by using the high-speed solenoid valve. Second, after experimenting static and dynamic characteristics on each signal flow, we identified system parameter of approximated model. Finally, to control the speed of HST, we controlled the angle of the swash plate of positive displacement pump by controlling the pressure in the control cylinder chamber. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.92-99
• /
• 1996

Energy-efficient contrarotating propeller systems have been recently reviewed as one of alternative means in marine car-carrier applications. Contrarotating rotors preclude the usage of conventional plain journal bearings due to the lack of load carrying capacity. A new multi-recess hydrostatic contrarotating journal beating test facility has been designed and installed to test the static load carrying capacity. Measurements of flow rates and orbits have been investigated by testings on a overhung-type contrarotating rotor system which is supported by a hydrostatic journal bearing. Numerical results of static equilibria were compared with test results. Various contrarotating speed combinations, and supply pressure conditions were selected. The numerical predictions of orbit centers and flow rates are generally accurate.

• 드라이브 ㆍ 컨트롤
• /
• 제10권1호
• /
• pp.21-28
• /
• 2013

Wind energy has been more and more important and contributive in the energy utilization of the world. This paper proposed a novel method for Wind Energy Conversion System (WECS), in which a secondary control hydrostatic transmission (SC-HST) with two hydraulic accumulators, were employed for wind energy conversion system. This approach can absorb the excessive power of turbine, keep the generator from over-speed and maintain the speed of generator in low speed of turbine. A PID controller was designed for speed control to track a predefined speed. The simulation results indicated that the speed of the generator was ensured with the relative error less than 2%; and the efficiency of the proposed system was 70.4%.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.425-431
• /
• 1999

Nowadays development of electric and optical devices needs precision more and more. This study focuses on hydrostatic journal bearing of grinding wheel spindle. It presents theoretical analysis about cylinder type self-controlled restrictor to control flux of oil flowing into pockets around the hydrostatic journal bearing. As a result of this analysis, optimal properties to maximize bearing stiffness such as initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring and clearance between spindle and housing can be obtained. Therefore, by using them it is possible to estimate bearing stiffness and the performance of grinding wheel spindle can be improved.