• 제목/요약/키워드: Hydrogen industry

검색결과 413건 처리시간 0.026초

Malus melliana 에탄올 추출물의 항산화 및 항염증 활성 (The Anti-oxidative and Anti-inflammatory Activities of Malus melliana Ethanol Extract)

  • 이수현;진경숙;김병우;권현주
    • 생명과학회지
    • /
    • 제27권7호
    • /
    • pp.783-789
    • /
    • 2017
  • Malus melliana (Hand.-Mazz.) Rehder (M. melliana)는 장미과에 속하는 중국 자생 식물 중 하나로 현재까지 보고된 생리활성은 전무하다. 본 연구에서는 M. melliana 에탄올 추출물(MMEE)의 항산화 및 항염증 생리활성을 DPPH 라디칼 소거능, ROS 소거능, NO 생성 저해능 및 Western blot hybridization을 통한 연관 단백질 발현분석을 통해 평가하였다. MMEE의 항산화능을 DPPH 라디칼 소거능을 통해 분석한 결과 양성 대조군으로 사용한 대표적인 항산화제인 아스코르빈산과 유사한 정도의 높은 소거활성을 보여 MMEE가 매우 강한 항산화능을 보유함을 확인하였다. 또한 RAW 264.7 세포주에서 $H_2O_2$에 의해 유도된 ROS에 대한 MMEE의 소거능을 분석한 결과, 농도의존적인 강한 ROS 소거능을 보였다. 뿐만 아니라 대표적인 항산화 효소인 HO-1 및 그 전사 인자인 Nrf2의 단백질 발현에 미치는 영향을 분석한 결과 MMEE에 의해 HO-1 및 Nrf2의 발현이 증가됨을 보였다. 한편 MMEE가 LPS에 의해 유도된 NO 생성에 미치는 영향을 분석한 결과 농도의존적인 NO 생성 저해능을 보였으며 이는 NO 생성 단백질인 iNOS의 발현 저해에서 기인함을 확인하였다. 이러한 결과를 통해 MMEE의 높은 항산화능과 항염증 활성을 확인하였으며 향후 잠재적인 기능성 소재로서 유용하게 활용될 수 있을 것으로 판단된다. 추후 계속적인 연구를 통해 활성 물질의 규명이 필요할 것으로 판단된다.

Decaisnea insignis 에탄올 추출물의 항산화 및 항염증 활성 (Anti-oxidative and Anti-inflammatory Activities of Decaisnea insignis Ethanol Extract)

  • 진경숙;이지영;권현주;김병우
    • 생명과학회지
    • /
    • 제24권9호
    • /
    • pp.973-980
    • /
    • 2014
  • 본 연구에서는 식물에 존재하는 신규 기능성 소재 개발의 일환으로 Decaisnea insignis 에탄올 추출물(DIEE)의 항산화 및 항염증 생리활성을 분석하였다. 먼저 DIEE의 항산화능을 DPPH 라디칼 소거능을 통해 분석한 결과 양성 대조군으로 사용한 아스코르빈산과 유사한 정도의 높은 소거활성을 보여 DIEE가 매우 강한 항산화능을 보유함을 확인하였다. 또한 RAW 264.7 세포주에서 $H_2O_2$ 및 LPS에 의해 유도된 ROS에 대한 DIEE의 소거능을 분석한 결과, 농도의존적인 강한 ROS 소거능을 보였다. 뿐만 아니라 대표적인 항산화효소 중 하나로 항산화능 보유 천연물에 의해 발현이 유도되는 hemeoxygenase 1 (HO-1) 및 그 전사 인자인 nuclear factor-E2-related factor 2(Nrf2)의 단백질 발현이 DIEE의 처리에 의해 유의적으로 증가됨을 보였으며 이러한 HO-1 및 Nrf2의 발현 유도는 상위신호전달계인 MAPKs에 의해 조절될 가능성을 보였다. 한편 DIEE가 LPS에 의해 유도된 NO 생성에 미치는 영향을 분석한 결과 농도의존적인 NO 생성 저해능을 보였으며 이는 NO 생성 단백질인 iNOS의 발현 저해에서 기인함을 확인하였다. 이와 같은 DIEE의 NO 생성 억제 효과는 염증 상위신호전달계인 $NF-{\kappa}B$ 및 AP-1의 조절을 통해 일어날 가능성을 보였다. 이러한 결과를 통해 DIEE의 높은 항산화능과 항염증 활성을 처음으로 확인하였으며 향후 기능성 소재로서 유용하게 활용될 수 있을 것으로 판단된다.

Investigation of Firing Conditions for Optimizing Aluminum-Doped p+-layer of Crystalline Silicon Solar Cells

  • Lee, Sang Hee;Lee, Doo Won;Shin, Eun Gu;Lee, Soo Hong
    • Current Photovoltaic Research
    • /
    • 제4권1호
    • /
    • pp.12-15
    • /
    • 2016
  • Screen printing technique followed by firing has commonly been used as metallization for both laboratory and industrial based solar cells. In the solar cell industry, the firing process is usually conducted in a belt furnace and needs to be optimized for fabricating high efficiency solar cells. The printed-Al layer on the silicon is rapidly heated at over $800^{\circ}C$ which forms a layer of back surface field (BSF) between Si-Al interfaces. The BSF layer forms $p-p^+$ structure on the rear side of cells and lower rear surface recombination velocity (SRV). To have low SRV, deep $p^+$ layer and uniform junction formation are required. In this experiment, firing process was carried out by using conventional tube furnace with $N_2$ gas atmosphere to optimize $V_{oc}$ of laboratory cells. To measure the thickness of BSF layer, selective etching was conducted by using a solution composed of hydrogen fluoride, nitric acid and acetic acid. The $V_{oc}$ and pseudo efficiency were measured by Suns-$V_{oc}$ to compare cell properties with varied firing condition.

저온 농축법에 의한 수소와 헬륨 중의 미량가스 분석 (Analysis of Trace Impurities in The Bulk $H_2$ and He Gases by a Cold Concentration Method)

  • 이택홍;박두선;손무용
    • 대한화학회지
    • /
    • 제42권5호
    • /
    • pp.526-530
    • /
    • 1998
  • 가스분석에서 극미량 성분분석은 반도체 관련 산업의 발달과 더불어 매우 중요하다. 특히 반도체 생산설비 중 가스공급시스템의 공기성분에 의한 오염은 제조자에게 어려움을 제공해 왔다. 그래서 공기성분의 분석은 반도체의 품질조절에 매우 중요하다. 본 연구에서는 가스분석에서 범용으로 사용되는 열전도도 검출기를 장착한 가스크로마토그래프와 액체질소트랩을 이용하여 헬륨과 수소 중의 질소와 아르곤성분을 분석하였다. 농축법으로 결정된 미지 시료의 농도를 다른 종류의 검출기와 비교 분석하였다. 이 방법에 의해서 결정된 농도는 결정된 확장불확도 범위 내에서 만족할 만한 결과를 보여 주었다.

  • PDF

나노 디바이스 응용을 위한 탄소나노튜브 성장 특성 (Growth of Carbon Nanotubes for Nano Device Application)

  • 박용욱;이승대
    • 한국컴퓨터산업학회논문지
    • /
    • 제8권1호
    • /
    • pp.17-22
    • /
    • 2007
  • 본 연구에서는 선택적 영역에서 반도체 성질을 갖는 탄소나노튜브을 합성하기 위해 촉매의 구조 및 형태가 탄소나노튜브의 성장에 미치는 영향을 연구하였다. CVD 방법으로 Fe와 Mo 전이 금속을 알루미나 나노 입자속에 삽입한 액상형태의 촉매구조와 박막형태의 나노 덩어리 Fe 금속박막을 증착한 후 실리콘 산화막$(SiO_2/Si)$ 기판에 $700^{\circ}C$ 온도에서 에틸렌$(C_2H_4)$가스를 사용하여 디바이스 사이에 정렬된 탄소나노튜브의 합성 연구를 수행 하였으며, 탄소나노튜브의 성장특성은 SEM과 AFM을 이용하여 분석하였다.

  • PDF

대두섬유에 대한 자초색소의 염색성 및 항균성 (Dyeing Properties and Antimicrobial Activity of Soybean Fiber with Gromwell Colorants)

  • 최희;신윤숙;최창남;김상률;정용식
    • 한국의류산업학회지
    • /
    • 제9권1호
    • /
    • pp.119-123
    • /
    • 2007
  • Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

고출력 $CO_2$레이저 용접에서 키홀의 불안정으로 발생한 기공의 절감방법 (Reduction Method of Porosity Formed by Instability of Keyhole in High Power $CO_2$ Laser Welding)

  • 김정일;조민현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권4호
    • /
    • pp.464-471
    • /
    • 2002
  • Porosity formation in partial penetration welds by high power lasers is a serious problem in industry. There are two main causes that induce porosity formation. One form of porosity is due to gases (e.g. hydrogen, oxygen) dissolving into the weld pool because of the high temperature and then the rapid solidification traps gases as a bubble in the weld metal. The second problem is voids formed by the keyhole collapsing due to unstable keyhole fluid dynamics. The voids that form at the bottom of the keyhole are relatively large and irregular in shape compared to the gas bubbles; this void formation is the primary concern in this paper. The reduction of voids formed by keyhole collapse is achieved by improving the stability of keyhole. Two methods to improve keyhole stability are discussed in this paper: pulse modulation and beam incident angle. Pulse modulation of the laser beam was performed between 100 Hz and 500 Hz to find out the optimum frequency for the keyhole dynamics. The incident beam angle changed the impact angle of the laser beam to the work surface in a range of 0 to 25 degrees. Glycerin in a semi-solidified state is used as a medium for performing the welding because its transparency allows of visualization of the keyhole.

Preparation and Characterization of Silk and Mulberry/Silk Papers

  • Lee, Ki-Hoon;Kang, Gyung-Don;Oh, Han-Jin;Ki, Chang-Seok;Kim, Jong-Wook;Park, Young-Hwan
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제13권1호
    • /
    • pp.45-50
    • /
    • 2006
  • Papers were prepared from cut cocoons and mulberry branches, which are byproducts from sericulture industry. The long filament of silk should be cut into appropriate length in order to prepare paper and this was achieved by chemical method. By a mixture of sodium hydroxide and sodium carbonate solution, the silk filaments were cut into short fibers (less than 1 mm in length). Since the short silk fibers (sSf) could not bind each other by itself, starch and poly(ethylene oxide)(PEO) were added as a bonding agent. When starch and PEO were used in a ratio of 3:7, the silk papers had optimum mechanical properties for paper. Fibers from the skin of mulberry branches (MBF) were added to sSf to enhance the mechanical properties of pure silk paper. Bleaching of MBF was performed with a mixture of hydrogen peroxide and sodium silicate. The mechanical properties were greatly enhanced and the optimum blend ratio of MBF and sSf were 7:3. The mulberry/silk paper has good absorption property against formaldehyde, and therefore, the paper could be applied as a wall paper for preventing the sick house syndrome.

BaP 및 TBT에 노출된 넙치와 개조개의 in vivo Comet assay (In vivo Comet Assay on Flounder and Clam Exposed to BaP and TBT)

  • 김소정;정영재;이택견
    • Ocean and Polar Research
    • /
    • 제33권2호
    • /
    • pp.127-133
    • /
    • 2011
  • The comet assay, also called single-cell electrophoresis (SCGE) assay, is a potential sensitive monitoring tool for DNA damage in cells. The primary objective of this study was to use comet assay to ascertain if the blood cells of flounder (Pleuronichthys olivaceus) and muscle cells of clam (Saxidomus purpurata) are suitable for genotoxicity screening. This was achieved by initially exposing blood and muscle cells under in vitro conditions to the reference genotoxin hydrogen peroxide ($H_2O_2$); strong correlation between $H_2O_2$ concentration and comet values were found. Subsequently, the identification of DNA damage in isolated cells from flounder and clam was performed under in vivo exposure to benzo(a)pyrene (BaP) and tributyltin (TBT). Flounder and clam were exposed to different concentrations (1, 10, 50, 100 ${\mu}g/L$) of BaP or TBT for 4 days. Regardless of treated chemicals, blood cells of flounder were more prone to DNA breakage compared to muscle cells of clam. In conclusion, in vivo genotoxicity of BaP and TBT can be biomonitored using the comet assay. This study suggests that flounder and clam do show potential as mediums for monitoring genotoxic damage by comet assay.

저온 농축법에 의한 극미량 성분 가스분석 (Analysis of Trace Impurities in The Bulk Gases by a Cold Concentration Method)

  • 이택홍;홍소영;정우찬;김영락;서정우;한주탁;박두선;손무룡
    • 한국가스학회:학술대회논문집
    • /
    • 한국가스학회 1997년도 추계학술발표회 논문집
    • /
    • pp.260-265
    • /
    • 1997
  • 가스분석에서의 극미량 성분분석은 반도체산업의 발달과 더불어 매우 중요하다. 이 실험에서는 가스분석에서 범용으로 사용되는 열전도도 검출기를 장착한 가스크로마토그라피와 액체질소트랩을 이용하여 헬륨과 수소중의 일산화탄소와 메탄성분을 분석하였다. 농축법으로 결정된 미지 시료의 농도를 다른 종류의 검출기와 비교분석하였다. 이 방법에 의해서 결정된 농도는 허용된 오차 범위에서 만족할 만한 결과를 보여 주었다.

  • PDF