• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.184-193
• /
• 2003

Cyclic sweep voltametry was performed to investigate the electrochemical behavior of heavy metal ions and the organic additives in surface finishing process. And electrolysis using parallel plate electrode electrolyzer was carried out to simulate the treatment of real waste water. Results showed that more than 99 percent of Cu was recovered and selective recovery of Cu in mixed waste water was possible, but the possibility of economical recovery of Ni and Cr were very low due to the evolution of hydrogen gas. Electrochemical oxidation of cyanide and organic additives on anode showed very excellent removal rate. The complete removal of several hundred ppm of cynide was possible within several tens minutes and organics within 2 or 3 hours. Even in case of concentrate waste water, the complete removal of COD by using NaCl and air stirring seemed to be possible.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2008

One of the major current challenges to nuclear energy lies in its competitiveness. To stay competitive the industry needs to reduce maintenance and fuel cycle costs, while enhancing safety features. Extended burnup is one of the methods applied to meet these objectives However, there are a number of potential fuel failure causes related to increased burnup, as follows: l) Corrosion of zirconium alloy cladding and the water chemistry parameters that enhance corrosion; 2) Dimensional changes of zirconium alloy components, 3) Stresses that challenge zirconium alloy ductility and the effect of hydrogen (H) pickup and redistribution as it affects ductility, 4) Fuel rod internal pressure, 5) Pellet-cladding interactions (PCI) and 6) pellet-cladding mechanical interactions (PCMI). This paper discusses current and potential failure mechanisms of these failure mechanisms.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.325-331
• /
• 2023

In this paper, we propose a mixed neural network structure of CNN and LSTM that can be used to detect or predict odor occurrence, which is most required in manufacturing industry or real life, using odor complex sensors. In addition, the proposed learning model uses a complex odor sensor to receive four types of data such as hydrogen sulfide, ammonia, benzene, and toluene in real time, and applies this data to an inference model to detect and predict odor conditions. The proposed model evaluated the prediction accuracy of the learning model through performance indicators according to accuracy, and the evaluation result showed an average performance of 94% or more.

• Clean Technology
• /
• v.2 no.1
• /
• pp.96-108
• /
• 1996

$NO_x$ is mainly emitted from mixed acid pickling process in the stainless industry and its impact to the environment has been worried over. This study which may be considered as one of the development of clean technologies, differing from the traditional end pipe technology is about how to reduce $NO_x$ emission through the modification of corresponding process. This study consists of two parts. First, the influence of various reaction parameters in a acid pickling process on $NO_x$ emission was investigated. Second, the influence of hydrogen peroxide on $NO_x$ formation, which is known as inhibitor of $NO_x$ emission, was investigated. Major findings in this study are as follows. The important reaction parameters which have a great influence on $NO_x$ emission are the reaction temperature and the concentration of fluoric acid. The concentration of nitric acid, some of which results in $NO_x$ compound is not as important as the concentration of fluoric acid. Synthetic mixed acid of nitric acid and fluoric acid itself in absent of pickling plate contributed the $NO_x$ emission, however, its impact was negligible in terms of quantity. The addition of hydrogen peroxide to the acid pickling process significantly contributed to the reduction of $NO_x$ emission and successfully achieved 80% reduction of $NO_x$ emission at the condition of $9.51{\times}10^{-2}mole\;hydrogen\;peroxide/m^2$ pickling area. This result was compared to literature value from Avesta steel process, indicating a sixth of hydrogen peroxide addition of Avesta's in achieving a same amount of $NO_x$ reduction. The region of the economic hydrogen peroxide addition per unit area of plate to be pickled from the result of this study was established.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.409-414
• /
• 2011

To promote the industry of PEMFC, the commercialization of its parts especially bipolar plate is needed. The bipolar plate is one of key parts for PEMFC, which occupies cost portion of 5~8% in the system. To replace the bipolar plate of machined graphite highly costly, the stamped thin matal or the molded carbon composite has been developed. According to the merits and demerits of each material and its forming process, the stamped metallic plate has been considered to the bipolar plate of PEMFC for automotive, and on the other hand, the molded composite plate has been considered to one for building applications. Hankook Tire Co., Ltd. has developed the carbon composite material and the manufacturing process for the bipolar plates. The developed bipolar plates were proved to be fully applicable to PEMFC of building applications in characteristics and performance, and so government strategic project to develop the mass-production technology for bipolar plates was started and is being conducted by the company. Through the government project for obtaining both the commercialization technology and production capacity for the bipolar plates, the price and the performance of domestic PEMFCs are expected to become competitive in international market.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.1
• /
• pp.81-93
• /
• 2015

Steam Reforming H2 Generation (SRH2G) System is a chemical process to produce hydrogen through steam reforming of hydrocarbon. Largely speaking, there are two types of materials for the SRH2G: 1) Oil and coal, and 2)Natural Gas such as shale gas. From the perspective of cost, quality (purity), and environmental burden (pollution), the latter is much more desirable than the former. For this reason, research on SRH2G using natural gas is actively carried out, and implemented and operated in the various industry. In this paper, we develop a natural gas based SRH2G system via systems engineering approach. Specifically, we first derived stakeholder requirements, followed by systems requirements and finally system architecture via a tailored SE process for plant (called Plant Systems Engineering (PSE) process) based on ISO/IEC 15288. The developed method was applied to iron and steel plant as a case study. Through the case study, by the SE approach, we were convinced that a successful system satisfying stakeholders' requirements within the given constraints can be developed, verified and validated.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.105-115
• /
• 2020

With the decrease of the agricultural population in Korea, the workers who is vulnerable to labor are increasing in agricultural industry because of aging, feminization of population. They are exposed in poor working environment with higher temperature and concentrations of dust, gas. Higher concentration of harmful gas and dust can cause chronic and acute disease to workers depending on exposure intensity and frequency. In order to improve the working environment in the livestock facilities, It is important to secure monitoring data of the thermal environment and the concentration of harmful gases and fine dust. Multi-point measurement was performed to analyze the regional environmental conditions in the pig rooms. When analyzing the working environment, video monitoring was conducted to analyze the concentration changes of ammonia, hydrogen sulfide and fine dust according to worker movement and work type. Ammonia and hydrogen sulfide monitoring result showed 1.5~2 times higher concentrations than other work when working in the pigs living zone, and 2~4 times higher than other work when working to increase the activity of pigs. In the case of fine dust, the result was 1.3 times higher than the worker's exposure standard in a specific work. The concentrations of gases and dusts from pig farms are not of concern for acute poisoning in normal work, but there is a risk of chronic respiratory disease if they are continuously exposed. Accordingly, there is a need for development of work environment monitoring device tailored to workers and preparation of alternatives.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.537-540
• /
• 2009

Bactericidal efficacies of various sanitizers and disinfectants against 10 Bacillus cereus strains isolated from Korean foods and 8 standard B. cereus strains were investigated. The sanitizing capabilities of ethanol, iodine, chloride, quaternary ammonium, hydrogen peroxide, and peroxide acetic acid were investigated using the EN 1276 method based on quantitative suspension testing. The resistance against sanitizers and disinfectants was higher for wild-type than standard strains, and the bactericidal activities decreased in dirty conditions. Ethanol, chlorine, and iodine at the maximum level allowed under Korean food sanitation laws showed a great effectiveness against B. cereus. Hydrogen peroxide at 1,100 ppm showed the lowest bactericidal activity against B. cereus. These results indicate that the legally allowed maximum concentrations of sanitizers and disinfectants in Korea do not reduce all B. cereus strains by at least $5\;{\log}_{10}\;CFU/mL$.

• Corrosion Science and Technology
• /
• v.6 no.2
• /
• pp.37-43
• /
• 2007

Iodine sulfur (IS) process is one of the promising processes for a hydrogen production by using a high temperature heat generated by a very high temperature gas cooled reactor(VHTR) in the nuclear power industries. Even though the IS process is very efficient for a hydrogen production and it is not accompanied by a carbon dioxide evolution, the highly corrosive environment of the process limits its application in the industry. Corrosion tests of selected materials were performed in sulfuric acid to select appropriate materials compatible with the IS process. The materials used in this work were Fe-Cr alloys, Fe-Ni-Cr alloys, Fe-Si alloys, Ni base alloys, Ta, Ti, Zr, SiC, Fe-Si, etc. The test environments were 50 wt% sulfuric acid at $120^{\circ}C$ and 98 wt% at $320^{\circ}C$. Corrosion rates were measured by using a weight change after an immersion. The surface morphologies and cross sectional areas of the corroded materials were examined by using SEM equipped with EDS. Corrosion behaviors of the materials were discussed in terms of the chemical composition of the materials, a weight loss, the corrosion morphology, the precipitates in the microstructure and the surface layer composition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1132-1140
• /
• 2016

According to global trend, despite the overall scale of agricultural industry has been downsized, agriculture accommodating cutting-edge ICT technologies has been proliferated, and various timely-issued relevant researches have been on progress to deploy the future food cultivation. In this paper, we propose an effective nutrient management system with web-based monitoring with functionality of controlling temperature, humidity, pH (hydrogen ion), EC (Electric Conductivity), LED and cooling fan to maintain the hydroponic nurturing environment being optimal. In this paper, in order the arduino hardware and java software are employed to control the nurturing environment automatically in optimal fashion. In proposed system, due to the usage of WiFi router with the socket communication and DB-assisted Web server with proper interfaces, it allows to facilitate the management to keep monitoring and controling overall hydroponic nurturing environment. Since the proposed Web-based management system provides the superior reliability, the short nurturing period and the robustness to the pest by controlling LED emitting color rather than conventional system, so it can be applied and appropriate for in-house vegetable factory overcoming limitation of time and location.