• 자원환경지질
• /
• 제22권2호
• /
• pp.141-150
• /
• 1989

In order to make economic and geological evaluation of coal in Korea, proximate and ultimate analyses were carried out as well as coal petrological studies such as maceral analyses, vitrinite reflectance and sporinite fluorescence measurement. The coeffcient of correlation between each factor of both conventional utilization and coal petrological parameters were studied as in Table 5 and 6. Their conclusions were as follow: (1) for anthracite, the good parameters of coal rank are mean vitrinite reflectance, carbon content, hydrogen content and H/C atomic ratio: (2) for brown coal and sub-bituminous coal, the good parameters of coal rank are carbon content, calorific value, moisture content, hydrogen content, oxygen content and O/C atomic ratio as well as vitrinite reflectance and sporinite fluorescence. An attempt is made to infer the coalforming environment by utilization of coal petrological analyses and to make comparison of coal analyses with proximate and ultimate analyses throughout the island arc region including Japan, Philippine and Indonesia and continental region including USA, Canada and Australia. As a result, meceral composition of Paleozoic and Mesozoic anthracite are similar to that of the Paleozoic continental coals, which were formed under dry conditions or low water table, but the coalification degree suddenly increased during Daebo orogeny (middle Jurassic to lower Cretaceous). The Tertiary coal resembles those of Tertiary island arc region coal characterized by higher calorific value, volatile matter content and H/C atomic ratio and by the formation of coal under wet conditions or higher water table.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.119-126
• /
• 2001

ECR-PECVD 방법으로 ECR 플라즈마 소스 power, $CH_4/H_2$ 가스 혼합비와 유량, 증착시간 및 기판 bias 전압을 변화시켜 가면서 수소가 함유된 비정질 탄소 박막을 증착하고, 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량 변화를 2.5 MeV 헬륨 이온빔을 사용하는 ERDa로 측정하였다. ERDA의 결과와 hES 및 RBS에 의한 성분분석으로부터 본 실첨에서 증착된 박막은 탄소와 수소만으로 구성 되어있음을 확인할 수 있었고, FTIR의 결과로부터 박막 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량이 변화함을 알 수 있었다. 기판 bias 전압을 증가시킬수록 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 현상으로 수소함량이 크게 감소됨을 알 수 있었다. 그 밖의 조건에서는 박막증착 초기에는 수소보다 탄소량이 좀 더 많다가 점차적으로 수소함량이 증가되었고, 이때 박막 내부에 함유되어 있는 수소함량은 45~55% 범위 내에 있음을 확인할 수 있었다.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.297-301
• /
• 2009

본 연구는 파프리카 재배농가에서 과산화수소를 이용하여 여름철 고온극복에 관한 연구수행 결과이다. 고온기 과산화수소(순도 30%)를 0.3%로 희석하여 5일주기로 살포한 결과 파프리카의 엽이 두꺼워지고 기공저항 속도가 낮아 순조로운 증산작용이 가능하였다. 주당 착과수는 무처리에 비하여 약 2개가 많았다. 또한 과산화수소처리에 따라 엽내 과산화수소량이 증가하는 경향이었고, 항산화효소인 catalase와 peroxidase의 활력이 증가되었다. 여름철 파프리카 재배에서 가장 많이 발생하는 흰가루병 방제를 위하여 농약사용이 불가피한 상황이지만 생산물의 농약잔류 등으로 사용에 많은 제한이 있는 현 상황에서 과산화수소의 주기적인 이용으로 흰가루병을 방제할 수 있고 생산량도 높일 수 있어 금후 파프리카 재배농가의 많은 이용이 기대 된다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.543-549
• /
• 2010

The hydrogen energy had recognized clean and high efficiency energy source. The research field of hydrogen energy was production, storage, application and transport. The commercial storage method was using high pressure tanks but it was not safety. However metal hydride was very safety due to high chemical stability. Mg and Mg alloys are attractive as hydrogen storage materials because of their lightweight and high absorption capacity (about 7.6 wt%). Their range of applications could be further extended if their hydrogenation properties and degradation behavior could be improved. The main emphasis of this study was to find an economical manufacturing method for Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. In order to examine their hydrogenation behavior, a Sievert's type automatic pressure-compositionisotherm (PCI) apparatus was used and experiments were performed at 423, 473, 523, 573, 623 and 673 K. The results of the thermogravimetric analysis (TGA) revealed that the absorbed hydrogen contents were around 2.5wt.% for (Mg8Ti2)-10 wt.%Ni. With an increasing Ni content, the absorbed hydrogen content decreased to 1.7 wt%, whereas the dehydriding starting temperatures were lowered by some 70-100 K. The results of PCI on (Mg8Ti2)-20 wt.%Ni showed that its hydrogen capacity was around 5.5 wt% and its reversible capacity and plateau pressure were also excellent at 623 K and 673 K.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.540-546
• /
• 2010

In order to confirm the effect of Nafion ionomer content in catalyst layer on the performance of PEMFC, we have fabricated several electrodes which were prepared by varying the quantity of Nafion ionomer from 24 wt.% to 39 wt.% in catalyst layer. The effect of Nafion ionomer of each electrode was evaluated with cyclic voltammetry measurement. In addition, cell performance was obtained through single cell test using hydrogen and air. The Pt utilization and performance of single cell were changed by addition of Nafion ionomer to the electrode. Single cell fabricated with 33 wt.% of Nafion ionomer in catalyst layer showed the maximum Pt utilization and performance.

• 한국주조공학회지
• /
• 제22권4호
• /
• pp.167-173
• /
• 2002

The hydrogen gas pick-up problem that can occur during Lost Foam Casting was investigated by reduced pressure test and practical Lost Foam Casting. The proper test pressure of reduced pressure test was determined by experiments not to use polystyrene and gas contents of the melt were calculated from density measurement results. The results showed that the hydrogen pick-up increased with the increased amount of polystyrene that was replaced by melt. The hydrogen pick-up was larger in the case of no degassed melt than that of degassed melt. So the hydrogen pick-up depended on the initial hydrogen content of the melt and the contact time of the melt with the decomposed gas phase. The mold evacuation decreased the hydrogen pick-up and increased the flow length of melt during Lost Foam Casting. And the error of calculated hydrogen pick-up was calculated by numerical method.

• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.97-104
• /
• 2003

The structural transitions of the matrix and the second phases of $Ti_{1.0}Mn_{0.9}V_{1.1}$ and $Ti_{1.0}Cr_{1.5}V_{1.7}$ alloys upon hydrogenation have been investigated at 293K. The effect of hydrogen isotope on their crystal structures has been also discussed. The crystal structures, Phase abundance and lattice parameters of the hydrides were determined by the Rietveld method using X-ray diffraction data. At the experimental temperature, the $Ti_{1.0}Mn_{0.9}V_{1.1}$ alloy and $Ti_{1.0}Cr_{1.5}V_{1.7}$ alloy revealed different structural transition processes upon hydrogenation although the crystal structures of these two alloys are both BCC at room temperature. The second phases such as Ti-rich phase with $NiTi_2$ structure and $\alpha$-Ti with HCP structure absorbed hydrogen at relatively low hydrogen pressures and the phase abundance remained almost constant. This means that it is desirable to decrease the amount of the second phases as far as possible in order to increase the effective hydrogen storage capacities of the alloys. The crystal structures of corresponding isotope hydrides, the phase abundance and the lattice parameters did not depend on the kind of hydrogen isotope, but only on the hydrogen content.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.102-107
• /
• 2009

The effect of annealing under argon atmosphere on hydrogenated amorphous silicon (a-Si:H) thin films deposited at room temperature and $300^{\circ}C$ using Radio Frequency (RF) magnetron sputtering has been investigated. For the films deposited at room temperature, there was not any increase in hydrogen content and optical band gap of the films, and as a result, quality of the films was not improved under any annealing conditions. For the films deposited at $300^{\circ}C$, on the other hand, significant increases in hydrogen content and optical band gap were observed, whereas values of microstructure parameter and dark conductivity were decreased upon annealing below $300^{\circ}C$. In this study, it was proposed that the Si-HX bonding strength is closely related to deposition temperature. Also, the improvement in optical, electrical and structural properties of the films deposited at $300^{\circ}C$ was originated from thermally activated hydrogen bubbles, which were initially trapped at microvoids in the films.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.123-130
• /
• 2005

Hydrogen-donating capacity, scavenging activity of reactive oxygen including superoxide anion radical and hydrogen peroxide, metal-chelating activity, and reducing power of garlic extracts were investigated. All tested garlic extracts exhibited in vitro antioxidant activities, with Uiseong extract showing highest hydrogen-donating and hydrogen peroxide-scavenging activities, and reducing power, followed by Seosan and Samchek extracts, in proportion to total thiosulfinate contents. Higher scavenging activity of superoxide anion radical was observed in Uiseong than Seosan and Samchek extracts. Metal-chelating activity increased in order of Uiseong < Seosan < Samchek, showing inverse relations to total thiosulfinate content. Garlic extracts of Uiseong and Seosan showed weak prooxidant activities and that of Samchek showed strong antioxidant activity against $Cu^{+2}$-induced human LDL oxidation. Protective effects on peroxyl and hydroxyl radical-induced DNA strand damages were observed in all tested garlic cloves. These results indicate growing conditions of garlic cloves affect total thiosulfinate content and antioxidant activities.

• 한국입자에어로졸학회지
• /
• 제9권1호
• /
• pp.31-36
• /
• 2013

In this study, Mo metal powder was prepared by hydrogen reduction of Mo trioxides with different purity of 2N and 3N grades. We have obtained Mo metal powder with oxygen content of 1450 ppm by hydrogen reduction and subsequent heat treatment for degassing. Using the Mo metal powder, a low-oxygen Mo ingot was prepared by repetitive vacuum arc melting. The oxygen content of the obtained Mo ingot was less than 70 ppm after vacuum arc melting for 30 min. The purity of the Mo metal powder and the ingot was evaluated using glow discharge mass spectrometry. The purity of the respective Mo ingots was increased to 3N and 4N grades from the Mo powder of 2N and 3N grades after the repetitive vacuum arc melting. The low oxygen Mo ingot thus can be used as a raw material for sputtering targets.