• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.385-389
• /
• 2012

In this study, torrefaction of mixed softwood chips under anoxic condition was performed to improve energy density and maintain consistent quality of biomass. Characteristics of torrefied biomass depending on reaction time (30 min) and temperature (240, 260,$280^{\circ}C$) were investigated. Torrefaction of mixed softwood chips significantly improved the heating value compared to that of untreated biomass. As the torrefaction temperature was increased, the carbon content of torrefied biomass increased from 46.55 to 55.73%, while its hydrogen and oxygen contents decreased from 6.00 to 5.87% and from 30.55 to 27.21%, respectively. Most of hemicelluloses and volatile compounds were removed during torrefaction. The highest heating value was 5132 kcal/kg when torrefaction was performed at$280^{\circ}C$ for 30 min. It implied that the heating value increased by 13% compared to that of original biomass. However, the condition of effective torrefaction was at $240^{\circ}C$ for 30 min when weight loss and energy yield was considered.

• Journal of the Korean Chemical Society
• /
• v.62 no.4
• /
• pp.279-287
• /
• 2018

In this study, we analyzed the explanations and examples of Brønsted-Lowry model in Chemistry I and Chemistry II textbooks of the 2009 revised curriculum. In particular, the definition of the Brønsted-Lowry model, the examples, and the content of experiments were analyzed by the process perspective of chemical equilibrium, emergent process. The analyzed textbooks were 4 kinds of Chemistry I textbooks and 4 kinds of Chemistry II textbooks in 2009 revision curriculum. As a result, Chemical I textbooks did not adequately show the chemical equilibrium viewpoint when explaining the Brønsted-Lowry model. In the Chemistry II textbooks, the examples of Brønsted-Lowry model were not present emergent process viewpoint, and those were described as sequential viewpoint of Arrhenius model. In addition, examples of experiments to demonstrate the Brønsted-Lowry model of Chemistry II textbooks were insufficient. The experimental examples related to the definition of acid bases were at the level of classification by the color change of indicators. The experimental examples for explaining the strength of acid and base were to compare current intensity or amount of hydrogen gas generated from the reaction with metal. In addition, all textbooks presented the state of aqueous solution when describing the Brønsted-Lowry model, causing problems with differentiation from the Arrhenius model. Therefore, it is necessary to develop examples of experiments to help students understand Brønsted-Lowry model by presenting acid and base reaction in the non-aqueous solution state.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.201-210
• /
• 2018

In this study, we formulated oil-in-water emulsion composition for skin care products containing jadeite powder which is well known as far-infrared radiating material. Jadeite powder could sustain stable dispersion in aqueous solvents over a month and this helped mixing it high content in oil-in-water emulsion formulation. To identify the effect of jadeite as a far-infrared radiator materials relating to the skin surface temperature change, we applied emulsion formulation containing 2 weight percent jadeite powder onto facial skin surface and blank formulation together and analyzed surface temperature with thermo-vision. Our results showed that the temperature difference between jadeite powder formulation applied region and blank formulation reached to 1.5 ~ 2.0 degree Celsius. We also performed same test with nephrite powder and titanium dioxide powder but only jadeite powder containing formulation showed significant skin temperature change. To elucidate main cause of heat energy transfer, we tested heat radiation, energy dispersive spectrometer analysis and measured far infrared radiance emissivity, diffuse reflectance spectra and water evaporation rate. We found out jadeite powder could retard water evaporation effectively from the skin surface and resist temperature drop down. This is because of the innate chemical composition and surface structure of jadeite, which can bind with water molecules to form hydrogen bonds. It is concluded that we can develop novel skin care products for moisturizing and thermos with jadeite powder.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2011

Composite membranes based on sulfonated poly(aryl ether) sulfone (SPAES) with different sulfated zirconia nanoparticles ($s-ZrO_2$) ratio are synthesized and investigated for the improvement of the hydration and the proton conductivity at high temperature and no humidification for fuel cell applications. X-ray diffraction technique is employed to characterize the structure and the size of $s-ZrO_2$ nanoparticles. The sulfation effect of $s-ZrO_2$ nanoparticles is verified by FT-IR analysis. The properties of the SPAES composite membranes with the various $s-ZrO_2$ ratio are evaluated by ion exchange capacity and water content. The proton conductivities of the composite membranes are estimated at room temperature with full hydration and at the various high temperature without external humidification. The composite membrane with 5 wt% $s-ZrO_2$ shows the highest proton conductivity. The proton conductivities are $0.9292\;S\;cm^{-1}$ at room temperature with full hydration and $0.0018\;S\;cm^{-1}$ at $120^{\circ}C$ without external humidification, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.1-5
• /
• 2018

In this work, we study the ion conductivity by analyzing the impedance to the high current density range that the PEMFC (Proton Exchange Membrane Fuel Cell) is actually operated. The effect of GDL (Gas Diffusion Layer)presence on impedance was investigated indirectly by measuring hydrogen permeability. When the RH (Relative Humidity)was higher than 60% in the low current range (< $80mA/cm^2$), the moisture content of the polymer membrane was sufficient and the ion conductivity of the membrane was not influenced by the current change. However, when RH was low, ion conductivity increased due to water production as current density increased. The ion conductivity of the membrane obtained by HFR (High Frequency Resistance) in the high current region ($100{\sim}800mA/cm^2$)was compared with the measured value and simulated value. At RH 100%, both experimental and simulated values showed constant ion conductivity without being influenced by current change. At 30~70% of RH, the ionic conductivity increased with increasing current density and tended to be constant.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.49-57
• /
• 2006

Enzymatic extracts were prepared from the blueberry (Vaccinium corymbosum L.) collected in Jeju, Korea. Five carbohydrases namely AMG, Celluclast, Termamyl, Ultraflo and Viscozyme, and five proteases namely Alcalase, Flavourzyme, Kojizyme, Neutrase and Protamex were used to prepare the enzymatic extracts. Antioxidant properties of each extracts were studied using stable 1,1-diphenyl 2-picrylhydrazyl (DPPH), reactive oxygen species (ROS), nitric oxide (NO) scavenging, metal chelating assays and lipid peroxidation inhibitory activity in hemoglobin-induced linoleic acid system. The phenolic content of all enzymatic extracts was in the range of 517.85-597.96 mg/100 g dried sample. DPPH and NO${\cdot}$scavenging, and metal chelating assays exhibited prominent activities. Viscozyme showed the highest DPPH activity $(0.046{\pm}0.002\;mg/mL)$ while AMG Showed the highest activity in NO${\cdot}$scavenging $(0.339{\pm}0.011\;mg/mL)$. All the extracts exhibited strong metal chelating activities. Blueberry enzymatic extracts also showed relatively good activity in hydrogen peroxide scavenging. AMG showed the highest lipid peroxidation inhibitory activity $(0.28{\pm}0.01\;mg/mL)$ in hemoglobin-induced linoleic acid system. In this results, the blueberry, which has potential antioxidant components, may be a good candidate as a natural antioxidant source.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.15-22
• /
• 1988

In this experiment, interactions between light and other factors such as chilling, alternating temperature, moisture, content, oxygen, and seed coat which affect germination of Oenothera lamarckiana Ser. seed were investigated to study the physiological effects of light on the germination. Light induced the initial stage of seed germination before radical protrusion by affecting embryo rather than seed coat even under anaerobic condition or low water potential (-18 bars). This light effect on germinability of seed was suppressed by blue light irradiation and the effect was increased with increment of blue light intensity and irradiation time. However, the blue light effect was reversible. Chilling, alternating temperature, softening of seed coat and light showed promotive interaction in the induction of seed germination. Irradiation of filtered light (monochrome), however, reduced chilling effect on germination. Hydrogen-ion concentration and gibberellic acid treatment had no effect on light or dark germination.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.18-24
• /
• 1998

Polyurethane (PU) synthesized from 4,4'-diphenylmethane diisocyanate having high functionality (f=2.9) and polyester polyol have been investigated by differential scanning calorimeter (DSC), dynamic mechanical thermal analyzer (DMTA), and Fourier transform infrared spectroscope (FT-IR). From the DSC measurement of polyurethane, a single transition temperature ($T_g$) was observed. This result indicates that polyurethanes synthesized in this work have homogeneous network structure due to high functionality of diisocyanate. It was also found that the $T_g$ of polyurethane was increased as hard segment content was increased. The results from DMTA measurement are consistent with DSC results. In order to investigate the effect of thermal annealing on the $T_g$ of polyurethane, the samples were annealed at various annealing conditions. $T_gs$ of polyurethanes were found to increased with annealing temperature. From swelling experiment and FT-IR studies, it was found that the $T_g$ was increased as crosslinking density of polyurethane was increased.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

In this work, the effect of PMR-15 content on the variation of surface free energy of the DGEBA/PMR-15 blend system was investigated in terms of contact angles and mechanical interfacial tests. Based on FT-IR result of the blend system. C=O (1,772, $1,778cm^{-1}$) and C-N ($1,372cm^{-1}$) peaks appeared with imidization of PMR-15 and -OH ($3,500cm^{-1}$) peak showed broadly at 10 phr of PMR-15 by ring-opening of epoxy. Contact angle measurements were performed by using deionized water and diiodomethane as testing liquids. As a result, the surface free energy of the blends gave a maximum value at 10 phr of PMR-15, due to the significant increasing of specific component. The mechanical interfacial properties measured from the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$) showed a similar behavior with the results of surface energetics. This behavior was probably attributed to The improving of the interfacial adhesion between intermolecules, resulting from increasing the hydrogen bondings of the blends.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.575-583
• /
• 2019

The results of the catalytic reaction by pulsed injection of reactants are useful for studying the initial reaction characteristics in the case of many coke invloved reactions. The dehydrogenation characteristics of alumina supported platinum tin catalysts were investigated by pulsed injection of propane. The yield of propylene was maximized when the reduction time of propane injection catalyst was $550^{\circ}C$. Raman analysis showed that the amount of coke was very small when PtSn (4.5) catalyst was used and the short contact time was simulated by propane pulse injection. n order to differentiate the degree of dispersion of platinum, PtSn (4.5) catalyst was sintered at $900^{\circ}C$ with hydrogen, and then the temperature of air - redispersion was varied and propane pulse was injected. As a result, conversione and yield were the highest when air-redispersion temperature is $600^{\circ}C$. The lower the air-redispersion temperature, the higher the selectivity. As the tin content in the platinum catalyst increased, the propane conversion was lowered, but the selectivity to propylene increased and the yield increased. From this, it can be seen that the tin-added platinum catalyst is less active than the platinum catalyst from the beginning of the reaction, which is less affected by coke. The dehydrogenation reaction by the propane pulse injection shows a higher conversion rate than the result of continuous injection due to the formation of COx, and the amount of coke is very small. Decrease in selectivity due to the formation of COx can be reduced by increasing the reduction temperature and time.