• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.377-384
• /
• 2023

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H₂) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO₄) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO₄ had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec^-1 at a current density of 10 mA cm^-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.117-123
• /
• 1968

A simplest and best method to find out lime requirement for Korean soils is described. Twenty six top soil samples were collected from various localities and chemical characteristics were dertermined. Three different buffer curve methods were employed as the standard to find out the most reliable test for lime requirement. In addition, the lime requirement test by the Shoemaker's and Woodruff's as well as the O.R.D. kit method were compared with the most reliable buffer curve method. The results may be summarized as follows. 1. The regression equation of the most reliable lime requirement by buffer curve method, y, on percent base saturation of various soils, X, was y=9.69-0.106 X and the negative correlation coefficient r=-0.84 was statistically significant at 5% level. 2. Lime requirement test by the best, buffer curve, method was more well correlated with the sum of exchangeable hydrogen and exchangeable aluminum contents of the soil samples than the exchangeable hydrogen content only. 3. The ordinary buffer curve method for lime requirement is more reasonable than the lime requirement test by the buffer curve prepared after addition of 1 normal potassium chloride or calcium chloride solutions. 4. The lime requirement tests by the most reasonable buffer curve method, X, and by the Woodruff's, the Shoemaker's and O.R.D. kit were compared. The best method for laboratory lime requirement test was the Shoemaker's method and the O.R.D. kit method also was good enough for the field test and these two method are recommended as the unified method of lime requirement test in each soil testing laboratories throughout Korea.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.605-616
• /
• 2004

Subinhibitory concentrations (sub-MICs) refer to concentrations below minimum inhibitory concentrations (MICs). The antimicrobial agents may be present at relatively high concentration, at least higher than bacterial MIC and thereafter be deserted off a surface and function at sub-MICs, perhaps by interfering with bacterial metabolism. Consequently, the aim of this study was to determine the effects of growth, in the presence of sub-MICs of antimicrobial agents, on the cell surface properties and virulence factors of mutans streptococci and to investigate the efficacy of a chemical approach in vitro. Streptococcus mutans Ingbritt and Streptococcus sobrinus 6715-7 were used. Eight antimicrobial agents (Sanguinaria extract;SG, Chlorhexidine digluconate;CHX, Fluoride;F, Propolis;PP, Hydrogen peroxide;HP, Triclosan;TC, Sodium dodecyl sulfate;SDS Cetylpyridinium chloride; CC) were diluted serially in broth to determine MICs and to compare the growth rate, acid production, hydrophobicity, adhesion activity to saliva coated hydroxyapatite, glucan synthesis and cellular aggregation of experiment groups (in the presence of sub-MICs) with those of control (in the absence of antimicrobial agents). Sub-MICs of antimicrobial agents affected the growth of cells, hydrophobicity, and adhesion of bacteria to saliva coated hydroxyapatite and glucan synthesis. They also resulted in a significant reduction in pH after 12 hours (p<0.05). By cells pretreated with proteinase K, either the aggregation induced by antimicrobial agents was completely inhibited or the aggregation titers were markedly increased. According to the results of the present study, each antimicrobial agent at sub-MICs could affect similar as its known action mechanism and could continually inhibit cariogenic bacteria at such concentrations. Thus, the use of these antimicrobial agents would be one of the effective methods to prevent dental caries.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.287-296
• /
• 2013

Excavated iron objects are preserved in stable condition through processes of conservation treatment because they are found in the form of various corrosion products. However, the conservation treatment leads to re-corrosion over time and accordingly, iron objects can be severely damaged, and therefore fundamental measures need to be prepared to control it. In this study, the types and characteristics of corrosion products were scientifically analyzed according to the re-corrosion of iron artifacts. In addition, the stability of the corrosion products was evaluated by exposing the standard samples under the re-corrosion environment. Re-corrosion proceeded with weeping in reddish brown on the cracks of iron artifacts. Weeping was detected akagan$\acute{e}$ite had a low hydrogen ion concentration and high chloride ion. The selection of standard sample goethite, lepidocrocite, hematite, and magnetite, were evaluated corrosive by weeping. After the samples were immersed in HCl(pH 1), $H_2SO_4$(pH 1), $H_2O$(pH 6) solution, they had been maintained for 180 days in relative humidity of 20%, 50%, 80% to investiage the changes of chemical components. As a result of analysis, the changes of chemical components were not showed in goethite, lepidocrocite, and hematite. But magnetite was changed to lepidocrocite in solution including chloride ion($Cl^-$) and to goethite and lepidocrocite solution including sulfuric acid($SO{_4}^{2-}$). Results of the study, in the case of magnetite known as s stable corrosion compound, it was identified the corrosion of magnetite occurs by corrosive ions, which means weeping generated in the iron artifacts can corrode magnetite as well as base metal.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.290-295
• /
• 1998

To optimize the formulation of acetaminophen liquid suppository, the effect of additives on the physicochemical properties of liquid suppository base was investigated. The physi cochemical properties of P 407/P 188 (15/15%) (abbreviated in 15/15) and P 407/P l88 (15/20%) (abbreviated in 15/20) were measured after the addition of following additives; 2.5% acetaminophen as an active ingredient, vehicle components (5% ethanol, 5% propylene glycol, 5% glycerin), preservatives (0.1% sodium benzoate, 0,1% methylparahydroxybenzoate, 0.1% propylparahydroxybenzoate) and 1% of sodium chloride as an ionic strength controlling agent. Poloxamer gel was prepared with three different buffer solutions (pH 1.2, 4.0 and 6.8) and the physicochemical properties, gelation temperature, gel strength and bioadhesive force, were determined. In the results, the effect of additives on the physicochemical properties was dependent on their bonding capacities including hydrogen bonding and cross-linking bonding. Because the hydrogen-bonding capacities of acetaminophen, ethanol and propylene glycol were smaller than that of poloxamer, the binding force of poloxamer gel became weak by their putting in between poloxamer gel. Therefore, the gelation temperature (15/15, $35.7^{\circ}C$ vs 37.0, 39.4 $38.2^{\circ}C$; 15/20, $29.2^{\circ}C$ vs 31.2, 32.0, $30.3^{\circ}C$) increased, and gel strength (15/15, 4.03 see vs 2.72, 2.08, 3.12sec; 15/20, 300g vs 50, 50, 200g) and bioadhesive force (15/15, $6.8{\times}10^2\;dyne/cm^2$ vs 3.2, 6.0, $6.0{\times}10^2\;dyne/cm^2$; 15/20, $97.3{\times}10^2\;dyne/cm^2$ vs 11.1, 89.5, $92.0{\times}10^2\;dyne/cm^2$) decreased. Furthermore, the binding force of poloxamer gel became strong due to the hydrogen-bonding capacities of glycerin and the cross-liking bonding of sodium salt. Then, the gelation temperature (15/15, 35.0, $32.1^{\circ}C$; 15/20, 26.0, $21.0^{\circ}C$) decreased, and gel strength (15/15, 6.51 see, 300g; 15/20, 500, 650g) and bioadhesive force (15/15, 7.2, $81.6{\times}10^2\;dyne/cm^2$; 15/20, 112.3, $309.2{\times}10^2\;dyne/cm^2$) increased. The effect of pH on the physicochemical properties of poloxamer gel was dependent on the ingredients with which the buffer solutions were prepared. Poloxamer gels prepared with pH 1.2 and 4.0 buffer solutions had the increasing gelation temperature (15/15, 37.5, $38.1^{\circ}C$; 15/20, 33.1, $34.0^{\circ}C$) and the decreasing gel strength (15/15, 2.98, 3.81sec; 15/20, 200, 200g) and bioadhesive force (15/15, $7.0{\times}10^2dyne/cm^2$; 15/20, $74.0{\sim}88.1{\times}10^2dyne/cm^2$) owing to HCl. Poloxamer gel prepared with pH 6.8 buffer solutions had the decreasing gelation temperature (15/15, $27.2^{\circ}C$; 15/20, $22.3^{\circ}C$) and the increasing gel strength (15/15, 400g; 15/20, 550g) and bioadhesive force (15/15, $207.0{\times}10^2dyne/cm^2$; 15/20, $215.0{\times}10^2dyne/cm^2$) due to the cross-linking bonding of $NaH_2PO_4\;and\;K_2HPO_4$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1297-1301
• /
• 2005

This study was carried to develop the new functional food material by exploring natural antioxidant substances of Crotalaria sessiflora L. We compared antioxidative activity of potential antioxidant substances extracted from Crotalaria sessiflora L. The order of extract yield of Crotalaria sessiflora L. were stem > loaves > seed > root. Antioxidative activities of Crotalaria sessiflora L. were measured by total polyphenol contents EDA (electron donating activity), SOD (superoxide dismutase) -like activity, hydroxyl radical scavenging ability and hydrogen peroxide radical scavenging ability. Total polyphenol acid content was much higher in leaves Ex than other extracts. And leaves Ex showed the most excellent antioxidative activity ($86.27\%$) in terms of SOD-like activity. The EDA was ordered loaves Ex > stem Ex > seed Ex > root Ex. Hydroxy radical scavenging ability was the most effective in loaves Ex, and hydorogen Peroxide radical scavenging ability was the highest in seed Ex. Therefore we could be certain that leaves Ex was the most effective in antioxidative activity from Crotalaria sessiflora L.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.241-247
• /
• 2012

Many infectious diseases have emerged or re-emerged during the past 50 years in South Korea. There were three outbreaks of foot and mouth disease (FMD) in South Korea between January 2010 and March 2011. Over 3.45 million animals were slaughtered (33.3% of the existing pigs, 8.4% of dairy cows and 3.4% of cattle). To select optimal degradation agents of animal cadavers, degradation rates and fertilizer components of pig cadavers were investigated using hydrogen chloride (HCl), potassium hydroxide (KOH) and sodium hydroxide (NaOH) hydrolysis methods. Degradation rates of pig cadavers using HCl, KOH and NaOH were 81.1, 82.8 and 91.6%, respectively. Total nitrogen (T-N) concentration in degradation solution of pig cadavers using KOH hydrolysis method was higher than that in NaOH and HCl hydrolysis methods. Total phosphorus ($P_2O_5$) concentrations in degradation solution of pig cadavers in all hydrolysis methods ranged 0.14 ~ 0.28%. Total potassium ($K_2O$) concentration for KOH hydrolysis method was higher than that for other hydrolysis methods. The concentration of T-N and $K_2O$ in degradation solution of pig cadavers by KOH hydrolysis method were higher than that in NaOH and HCl hydrolysis methods. Thus, to recycle animal cadavers in agriculture, the optimal degradation agent for hydrolysis was KOH.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.639-654
• /
• 2016

This study building materials by relates to human hazard assessment in accordance with the combustion gas SEM, the flame-retardant foam FTIR and cone calorimeter to configure the Forest products of MDF and preservative treated Lauan two kinds of Retardant styrofoam, Styrofoam, Urethane foam and gypsum board four kinds of plastics material by the combustion gas were each analyzed. MDF was burned to the structure of the wood and the glue evenly mixed combustion area preservative treated Lauan, kept constant even in the form of high heat to penetrate deep into the wood flame retardant agents. Retardant styrofoam is due to feed my Dropped dissolved inorganic flame retardant without the fire-stick and confirmed that the weak form of gypsum board, but keep the column. In MDF ammonia ($NH_3$), lethal concentration (750 ppm) compared to 795 ppm, preservative treated Lauan is carbon dioxide ($CO_2$) that was greater than 2.5 times the lethal concentration (100,000 ppm) to 256,965 ppm, the lethal concentration (500 ppm) of hydrogen chloride (HCl). The Urethane greater than 697 ppm, 434 ppm also greatly exceeding the nitrogen dioxide ($NO_2$) lethal concentration (250 ppm) in Retardant styrofoam and 398 ppm was released. It is confirmed that the human body is extremely harmful gas emitted from most of the materials to be utilized as basic data for evaluating the hazard-specific human future building material.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.385-394
• /
• 2016

A fabric excavated from tombs or passed down is not easy to find its original color as it degrades and discolors by UV and visible rays, oxygen and microorganisms. LC-MS analysis is commonly used for separating and analyzing colors, but color extraction process is complicated and important in dye-qualitative analysis. To extract red colors from a fabric which is dyed with safflower and lac, solvents; hydrogen chloride, pyridine and oxalic acid are used and oxalic acid was the most effective solvent. Meanwhile, dyed samples were put in degradation condition; UV-A for 168 hours and analyzed with LC-MS to find out its colors'chemical changes. As a result, carthamin is detected in $T_R$ 13 min and laccaic acid A is detected in $T_R$ 10 min. However carthamin is not detected in a degraded fabric dying with safflower, it could be identified as a safflower fabric by the molecular weight of m/z 931. Through this study the most optimal method for red color extraction is found so it is expected to be used as a base line data for red color LC-MS analysis.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.38-43
• /
• 2012

The purpose of this study is to carry out the consequence analysis of an accident related to the release of Hydrogen chloride occurred in a petrochemical company in Korea and suggest the measures to prevent similar accidents from happening again. The total amount released through the safety valve of HCl Column was calculated based on the rated capacity of the safety valve, the ideal gas equation and mechanical energy balance, respectively. As a result of the calculation, we found that the amount of HCl released through the safety valve was at least 76.8 kg. Also, we predicted the dispersion concentration at the position of the injured workers(more than 350 m away from the accident location) using simulation programs such as PHAST. The results of ALOHA and K-CARM are 304 ppm and 1,700 ppm respectively. However, PHAST calculation indicated that the concentration is less than l ppm. From these results, we can understand that workers were injured by HCl gas released from the safe valve and the concentration of gas might be less than 1 ppm. Also, it is important for toxic gases such as HCl to be vented safely to the atmosphere after scrubbing.