• 전기학회논문지
• /
• 제63권1호
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• 한국수소및신에너지학회논문집
• /
• 제30권4호
• /
• pp.356-361
• /
• 2019

Since the government announced the roadmap to revitalize the hydrogen economy, we are constantly making the effort to expand the use of fuel cell electric vehicles (FCEV) and hydrogen charging stations. There is however a significant issue to build and operate the hydrogen charging station due to the lack of the profit model. Many researchers believe that the supply of FCEV will be increased in the near future and finally ensure the economy of hydrogen charging stations. This study shows that the sales changes of hydrogen gas and consumption patterns by the operation of the hydrogen charging station in Changwon City. The results will be used as the evidence to support for operating the hydrogen charging station by private businesses and the validity of additional establishment of hydrogen charging stations.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.112.2-112.2
• /
• 2010

지구의 온난화로 인한 기상변화 등이 계속적으로 발생하는 가운데 전 세계는 지구 온난화의 가장 근본적인 원인인 이산화탄소의 방출을 줄이기 위한 방안을 찾기 위해 많은 노력을 하고 있다. 이에 대해 전 세계적으로 각종의 기후협약 체결, 리우선언, 도쿄의정서 등을 통해 온실가스 배출원인인 석유 등 화석에너지 배출을 억제하기 위한 활동이 행해지고 있으며, 기존의 화석연료를 대체할 수 있는 새로운 에너지를 발견하기 위한 연구개발에도 박차를 가하고 있다. 이러한 계속적인 연구개발에서, 세계의 국가들은 친환경 에너지인 태양열, 풍력, 지열 및 수소에너지와 같이 화석연료를 대체할 수 있는 다양한 에너지를 조사하고 개발해왔고 현재도 가장 적합한 에너지 자원을 찾기 위하여 노력 중에 있다. 최근에, 수많은 대체에너지 중 수소 에너지는 유해배출가스가 없기 때문에 가장 유망한 대안이라고 판단되어 전 세계가 수소에너지 연구개발에 주목하고 있다. 이러한 수소에너지를 교통수단에 적용하기 위하여 전 세계적으로 안전성 및 기술 확보를 위한 기술개발과 안전기준의 확립하기 위해 노력하고 있다. 현재 기술적으로 수소를 자동차용 연료로 사용하기 위해서는 수소를 액체 상태 및 압축 상태로 저장하는 것이다. 두 가지 저장방법 중 세계 대부분의 자동차 메이커들은 수소를 압축하는 방식을 채택하고 있으며, 자동차의 주행거리를 최대한 확보하기 위하여 수소가스를 고압으로 압축한 상태로 저장하는 방식을 사용하고 있다. 이에 따라 고압의 수소를 안전하게 저장할 수 있는 고압수소용기의 개발이 필요하다. 수소연료전지 자동차에 장착이 가능한 고압으로 압축된 수소를 저장할 수 있고, 자동차에 탑재할 수 있도록 적합한 크기의 가벼운 용기의 개발이 진행되어지고 있다. 자동차용 용기는 크게 4가지 타입으로 구분지어 진다. 현재는 4가지 타입의 압축용기 중 안전성과 중량을 만족시키기 위해 Type3와 Type4 형태의 용기가 수소자동차에 시범적으로 적용되어 운용되고 있다. 또한 고압수소용기의 신뢰성과 안전성을 확보하기 위한 기준 및 코드가 국 내외에서 연구 개발되고 있다. 본 연구에서는 수소연료전지자동차에 장착되는 고압수소용기의 국제기준 동향에 따른 국내의 차량용 고압수소용기를 위한 KGS 안전기준의 개발현황과 개발방향을 제시하고자 한다.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.694-701
• /
• 2016

According to revolutionary developments in automobile technologies, eco-friendly advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) are rapidly increasing. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are driven by electric energy and equipped with more electric systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference(EMI) test and an electromagnetic susceptibility(EMS) test. EMI test of the electric vehicles are needed not only in driving mode but also in charging mode because they must be recharged by much electric energy for driving. Depending on vehicle manufacturers, the charging device type and the location of charging device inlet in electric vehicles are various. In this paper, in order to investigate EMI of electric vehicles in charging mode in consideration of the direction of measuring antenna and the location of charging device inlet, a series of electromagnetic emission tests are conducted using three electric vehicles (neighborhood electric vehicle, electric vehicle and electric vehicle-bus). The test results show that electromagnetic emission measurements in charging mode are dependent on the direction of measuring antenna and the location of charging device inlet.

• 한국수소및신에너지학회논문집
• /
• 제13권4호
• /
• pp.287-296
• /
• 2002

현재 자동차의 문제점을 해결할 수 있는 가장 착실한 엔진은 수소를 이용한 연료 전지라고 판단된다. 연료전지는 화학적 에너지를 전기적 에너지로 직접 변환하는 장치이다. 순수한 연료전지 차량과 연료전지 하이브리드 차량을 비교 분석하였다. 연료전지 하이브리드 차량에서 고려하여야할 점은 효율, 연료경제성, 출력 특성 등이 있다. FUDS 싸이클 시뮬레이션 비교를 하면 하이브리드화가 순수 연료전지 차량 보다 효율이 높다. 이는 회생 제동 에너지를 이용할 수 있으며 battery를 이용하여 연료전지를 효율적인 영역에서 작동하게 할 수 있기 때문이다. Life cycle 비용은 연료전지의 크기, 연료전지의 가격, 수소의 가격 등에 지배적인 영향을 받는다. 연료전지의 가격이 고가이면 하이브리드화가 유리하나, 연료전지의 가격이 400$/kW 이하가 되면 순수한 연료전지 자동차가 비용면에서 유리 하다.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.26-34
• /
• 2008

This study presents an aerodynamic design and an experimental performance test of a turbo air compressor consisted of mixed-flow impeller and curved diffuser for the PEM fuel cell vehicle application. Many studies compare the efficiency, cost or noise level of high-pressure and low-pressure operation of PEM fuel cell systems. Pressure ratio 2.2:1 is considered as design target The goal of compressor design is to enlarge the flow margin of compressor from surge to choke mass flow rate to cover the operational envelope of FCV. Large-scale rig test is performed to evaluate the compressor performance and to compare the effects of compressor exit pipe volume to stall or surge characteristics. The results show that the mixed-flow compressor designed has large flow margin, and the flow margin of compressor configuration with small exit volume is larger than that with large exit volume.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.165-168
• /
• 2007

The objective of this study is to demonstrate and commercialized for on-board fuel storage system for the hydrogen fuel cell vehicles. Type3 composite cylinder is consisting of the full wrapped composites on a seamless aluminum liner. Especially, the seamless aluminum liner has been commercialized with development of fabrication through this study. The key technologies, including design, analysis and the optimized filament winding process for 350bar composite cylinder, were established and verified with design qualification test in accordance with international standard. And the facilities for fabrication and design qualification test have been constructed.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.9-21
• /
• 2009

As one of the alternative solution for energy and environmental issues such as climate change, energy security, oil price, etc., hydrogen energy has been getting so much attentions these days. This paper analyzed the $CO_2$ emission, costs, and energy consumptions when the hydrogen energy was introduced to transportation, specifically in Sedan sector using the energy system model, MARKAL. As results, 21.5% of $CO_2$ emission in 2040 could be reduced and additional 76 billion dollars will be needed in the high energy price scenario. The amount of energy saving mainly due to the replacement of existing car to hydrogen vehicle was 16% of the final energy consumption in 2040.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1229-1237
• /
• 2003

The production of hydrogen fuel depends basically on the water electrolysis. The ultrasonic effects the decrease of the overpotential in a water electrolysis. A study on the overpotential which activates the hydrogen production is the core to elevate the hydrogen production efficiency on the principle. A pressure sensor system by a new idea is developed and applied. Solutions are 4 kinds of KOH concentration such as 0%, 10%, 20%, and 30%. Two frequency bands of the ultrasonic transducer are 28kHz and 2MHz. The directions of ultrasonic forcing are the vertical direction and the horizontal direction. The temperatures are two states, i.e., no constant and constant. Experiments are carried out sequentially in order in three cases of no ultrasonic forcing, ultrasonic forcing, and ultrasonic discontinution. In results, it is clarified that the ultrasonic effects the decrease of overpotential to elevate the efficiency of hydrogen production.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.623-630
• /
• 2023

Recently, a hydrogen charging station-related memorandum of understanding (MOU) was signed between Korea Transport Institute and United Arab Emirates (UAE) Ministry of Transport in Abu Dhabi, creating a foundation for exporting green hydrogen charging stations and hydrogen powered public transit buses developed with Korean technology to Abu Dhabi. Reliable construction and operation of the charging stations require a thorough review on associated standards and legal requirements. In particular, it is essential to analyze currently effective standards related to hydrogen production, hydrogen vehicle charging, and hydrogen charging stations. This paper specifically focuses on comparative analysis of hydrogen-related standards in the UAE and the Republic of Korea. Similar to UAE, Korean hydrogen charging station-related standards follow International Organization for Standardization (ISO) standards. From real-life experiences in developing and operating charging stations, even more essence of ISO standards have been adopted in Korean standards than UAE. In particular, ISO standards related to fire prevention are additionally included in Korea. This paper also suggests procedural and administrative strategies for enabling application of Korean hydrogen charging station-related standards in UAE.