• Resources Recycling
• /
• v.24 no.5
• /
• pp.56-62
• /
• 2015

Solvent extraction experiments for the separation and recovery of Re from hydrochloric acid leaching solution of spent super alloy by Alamine 304-1 were carried out. The effects of some variables, such as the nature and concentration of the extractants, HCl concentration, and the presence of impurities were investigated. The synthetic solutions of Re were prepared by dissolving ammonium perrhenate (APR), Alamine304-1, Cyanex272 and $D_2EHPA$ were used solvent extractants distilled in kerosene. The extraction percentage of Re by Alamine304-1 was higher than the other extractants as Cyanex272 and $D_2EHPA$ and the percentage is about 99%. Only 99% of Re was extracted in the presence of Al, Co and V in HCl solution.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.25-31
• /
• 2021

Smelting reduction of spent lithium-ion batteries results in the production of metallic alloys in which reduced cobalt, nickel and copper coexist. In this study, we investigated the leaching of the metallic alloys containing the above three metals together with iron, manganese, and silicon. The mixture of hydrochloric acid and hydrogen peroxide as an oxidizing agent was employed, and the effect of the concentration thereof, the reaction time and temperature, and pulp density was investigated to accomplish the complete leaching of cobalt, nickel, and copper. The effect of the hydrogen peroxide concentration and pulp density on the leaching was prominent, compared to that of reaction time and temperature, especially in the range of 20 to 80℃. The complete leaching of the metals present in metallic alloys, except silicon, was accomplished using 2 M HCl and 5% H₂O₂ with a pulp density of 30 g/L for 150 min at 60℃.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.1
• /
• pp.44-56
• /
• 1997

Influence of electrochemical etching conditions on capacitance gain of aluminium electrolytic on capacitor foil has been investigated by etching cubic textured high purity aluminum foil in dilute hydrochloric acid. Uniformly distributed etch pit tunnels on aluminum surface have been obtained by pretreatment aluminium foil in 10% NaOH solution for 5 minutes followed by electrochemical etching. Electrostatic capacitance of etched aluminium foil anodized to high voltage increased with the increase of current density, total charge, temperature and concentration of electrolyte up to maximum CV-value and then deceased. Election optical observation of the etched foil revealed that the density of etch of etch pits increased with the increase of current density and concentration of electrolyte. this increase of etch pit density enlarged of the increase of capacitance. However, abnormal high current density and high electrolyte concentration induced the local dissolution of the foil surface which resulted the decrease of foil capacitance.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.349-355
• /
• 2009

In the solvent extraction of Ru(IV) with Alamine336, it was found that Ru took part in the reaction as $RuCl_{6}_^{2-}$ in the HCl concentration range of 1 to 5 M. Interaction parameter between hydrogen ion and $RuCl_{6}_^{2-}$ was estimated by applying Bromley equation to the extraction data. From the mixed solutions of Pd(II) and Ru(IV), the distribution coefficients of Pd were found to be higher than those of Ru in the experimental ranges. Separation factor between Pd and Ru rapidly increased with the decrease of Alamine336 concentration. About 60% of the Ru from the mixed solutions was extracted by TBP at 8.3 M HCl, while Pd was not extracted in the HCl concentration range of 1.6 to 8.3 M.

• Mycobiology
• /
• v.38 no.4
• /
• pp.295-301
• /
• 2010

We evaluated the antioxidant activity and tyrosinase inhibitory effects of Pleurotus ostreatus fruiting bodies extracted with acetone, methanol, and hot water. The antioxidant activities were tested against $\beta$-carotene-linoleic acid, reducing power, 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activity, and ferrous chelating ability. Furthermore, phenolic acid and flavonoid contents were also analyzed. The methanol extract showed the strongest $\beta$-carotene-linoleic acid inhibition as compared to the other exracts. The acetone extract (8 mg/mL) showed a significantly high reducing power of 1.54 than the other extracts. The acetone extract was more effective than other extracts for scavenging on 1,1-diphenyl-2-picrylhydrazyl radicals. The strongest chelating effect (85.66%) was obtained from the acetone extract at 1.0 mg/mL. The antioxidant activities of the extracts from the P. ostreatus fruiting bodies increased with increasing concentration. A high performance liquid chromatography analysis detected seven phenolic compounds, including gallic acid, protocatechuic acid, chlorogenic acid, naringenin, hesperetin, formononetin, and biochanin-A in an acetonitrile and 0.1 N hydrochloric acid (5 : 1) solvent extract. The total phenolic compound concentration was $188{\mu}g$/g. Tyrosinase inhibition of the acetone, methanol, and hot water P. ostreatus extracts increased with increasing concentration. The results revealed that the methanol extract had good tyrosinase inhibitory ability, whereas the acetone and hot water extracts showed moderate activity at the concentrations tested. The results suggested that P. ostreatus may have potential as a natural antioxidant.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.690-692
• /
• 2008

Pure glycerol could be obtained from a biodiesel byproduct by separation processes including neutralization, precipitation, and distillation. The contents of distilled glycerol through the above separation processes were measured and the results were compared according to experimental conditions such as acid concentration and precipitation temperature. Neutralization processes were carried out in the concentration range of 5~37 wt% hydrochloric acid, 5~95 wt% sulfuric acid, and 5~85 wt% phosphoric acid, respectively. Precipitation temperatures in neutralization were controlled in the range of 293~333 K. Higher values of the distilled glycerol content were obtained due to the salt removal in the pretreatment case of neutralization with 10 wt% sulfuric acid and precipitation of 313 K with 85 wt% phosphoric acid, respectively. The variations of acid concentration and precipitation temperature in pretreatment steps affected to some extent glycerol recovery from the biodiesel byproduct.

• Geomechanics and Engineering
• /
• v.29 no.5
• /
• pp.549-565
• /
• 2022

Severe acid rains can be a major source for geotechnical and environmental problems in any soil depending on the acid type and concentration. Hence, this study investigates the individual severe effects of sulfuric, hydrochloric and nitric acids on the geotechnical properties of real field soil through a series of experimental laboratory tests. The laboratory program consists of experimental tests such as consistency, compaction, unconfined compression, pH determination, electrical conductivity, total dissolved salts, total suspended solids, gypsum and carbonates contents. The experimental tests have been performed on the untreated soil and individual acid treated soil for acid concentrations range of 0% to 20% by weight. In addition, a unique hyperbolic mathematical model has been used to predict significant geotechnical characteristics for acid treated soil. The plastic and liquid limits and optimum moisture content have been increased under the effect of all the used acids whereas the maximum dry density and unconfined stress-strain behavior have been decreased with increasing the acid concentrations. Moreover, the used hyperbolic mathematical model has predicted all the geotechnical characteristics very well with a very high coefficient of determination (R²) value and lowest root mean square error (RMSE) estimate.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.207-219
• /
• 2014

Fouling is one of the critical factors associated with the application of membrane technology in treating palm oil mill effluent (POME), due to the presence of high concentration of solid organic matter, oil, and grease. In order to overcome this, chemical cleaning is needed to enhance the effectiveness of membranes for filtration. The potential use of sodium hydroxide (NaOH), sodium chloride (NaCl), hydrochloric acid (HCl), ethylenediaminetetraacetic acid (EDTA), and ultrapure water (UPW) as cleaning agents have been investigated in this study. It was found that sodium hydroxide is the most powerful cleaning agent, the optimum conditions that apply are as follows: 3% for the concentration of NaOH, $45^{\circ}C$ for temperature solution, 5 bar operating pressure, and solution pH 11.64. Overall, flux recovery reached 99.5%. SEM images demonstrated that the membrane surface after cleaning demonstrated similar performance to fresh membranes. This is indicative of the fact that NaOH solution is capable of removing almost all of the foulants from PES membranes.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.5
• /
• pp.455-461
• /
• 1999

The possibility of wine making from soft and dried persimmon and the effects of treatment for persimmon on the quality of wine have been investigated. Soft persimmon was pretreated by two method of heat and hydrochloric acid treatment. Fermentation mash was composed of 12% persimmon and 15% of sucrose and was fermented at 17$^{\circ}C$ for 36 days. The fermentation using persimmons which were untreated and treated by acid was not successful because of contamination caused by lactic acid and acetic acid bacteria. Acidity of the fermented broth produced from boiled dried acid treated and untreated persimmon was 4,4, 5.0, 5,8 and 13.5ml(0.1N NaOH/10ml broth) respectively. Ethanol concentration of the fermented broth produced from boiled dried acid treated and untreated persimmon was 11.2, 10.0, 9.4 and 6.1% v/v respectively. The wine fermented for 28day's fermentation using boiled persimmon as substate had the best quality and stability. After 36day's fermentation using boild persimon following composition was obtained: 4.65% of total sugar 3.65% of reducing sugar 0.03mg/ml of protin 0.17$\mu$/ml of amino acid and 13.02 $\mu$g/ml of pectin. The pH and yeast cell of the boiled persimmon broth were 3.4 and 5.75 logCFU/ml. Fermented wine using dried persimmon had aslo good quality but the fermentation rate was slow.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.218-222
• /
• 2017

This study was conducted to remove $NO_x$, which is the main cause of fine dust and air pollution as well as acid rain. $NO_x$ was tested using 3% NO (diluted in He) as a simulated gas. Experiments were sequentially carried out by oxidizing NO to $NO_2$ and absorbing $NO_2$. Especially, we focused on the changes of NO oxidation according to both oxidant ($NaClO_2$) concentration change (1~10 M) and oxidant pH change (pH = 1~5) by adding HCl. In addition, we tried to suggest a method to improve $NO_2$ absorption by conducting $NO_2$ reduction reaction with reducing agent (NaOH) concentration (40~60%). It was found that NO removal efficiency increased as both concentration of oxidant and flow rate of NO gas increased, and NO decreased more effectively as the pH of hydrochloric acid added to the oxidant was lower. The $NO_2$ adsorption was also better with increasing NaOH concentration, but the NO removal efficiency was ~20% lower than that of the selective NO reduction. Indeed, this experimental method is expected to be a new method that can be applied to the capture and removal of fine dust caused by air pollution because it is a method that can easily remove NO gas by a simple device without expensive giant equipment.