• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1257-1266
• /
• 2000

The flow field if a ship's propulsion mechanism of Weis-Fogh type is studied by the discrete vertex method. The wing in a channel is approximated by a finite number of bound vortices, and free vortices representing the separated flow are introduced from the trailing edge if the wing. The time histories of the thrust, the drag, and the moment acting on the wing are calculated, including the unsteady force due to the change of strength of the bound vortices. These calculated values agree well with the experimental values. The flow field of this propulsion mechanism is numerically clarified.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.41-47
• /
• 1998

The solvent flushing apparatus for soil remediation was manufactured. After the soil around nuclear facilities was sampled and was compulsorily contaminated by Co, the remediation characteristics by solvent flushing were analyzed. Meanwhile, one-dimensional solute transport within nonequilibrium sorption code was developed for modelling of the soil remediation, input parameters for modelling were measured by laboratory experiment. Experimental results are as follows : When water was used as a solvent, the higher was the hydraulic conductivity, the higher the efficiency of soil remediation was. When EDTA solution was used as a solvent, the soil remediation efficiency of EDTA solution showed higher than that of water.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1349-1357
• /
• 2010

절토사면의 안정성은 1차적으로 사면 자체의 지반 구조에 의해서 결정되지만 2차적으로 강우와 강설에 의한 수리적인 요소의 영향을 받는다. 매 년 여름 집중호우 기간에 많은 사면들이 붕괴되는 사례를 볼 때, 수리적인 요소가 사면의 안정성에 큰 영향을 주는 것을 알 수 있다. 수리제어공법의 목적은 물이 배수될 수 있는 길을 만들어주는 것으로 그 목적은 매우 간단하다. 하지만 공법이 시공된 이후 강우와 강설로 인해 유입되는 토사, 낙엽이 관리 소홀로 도수로나 배수로를 막아 본래의 역할을 하지 못하는 경우가 대부분이다. 본 연구에서는 이와 같은 문제점으로 발생한 국내 사례를 통해 사면에 적용되는 수리제어공법들의 유지관리 개선방안에 대해 논의하고자 한다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.50-55
• /
• 1986

본 연구에서는 경계면에 맞춘 좌표계를 이용한 mapping을 통하여 37개봉으로 구성된 유로에서의 전달현상을 분석하였다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.747-754
• /
• 2005

Because the liquid-vapor interfacial shear stress affects seriously the liquid flow and the maximum heat transport rate of the grooved wick heat pipe, an accurate modeling for the pressure drop characteristics of the liquid flow is required. A novel method for calculating the liquid pressure drop and the velocity profile of an open channel flow in a microchannel with an arbitrary cross-section is suggested and validated by experiments. An experimental apparatus for the Poiseuille number of the liquid flow in open rectangular microchannels with the hydraulic diameters of 0.40mm, 0.43mm, 0.48mm is used in order to reproduce real situations in the grooved wick heat pipe. Analytic results from the suggested method are compared with the experimental data and they are in a close agreement with each other.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.423-428
• /
• 1995

Simulation models have been developed to predict the overall behavior of the CANDU plant systems during normal operational transients. For real time simulation purpose, simplified thermal hydraulic models are applied with appropriate system control logics, which include primary heat transport system solver with its component models and secondary side system models. The secondary side models are mainly used to provide boundary conditions for primary system calculation and to accomodate plant power control logics. Also, for the effective use of simulation package, hardware oriented basic simulation network has been established with appropriate graphic display system. Through validation with typical plant power maneuvering cases using proven plant performance analysis computer code, the present simulation package shows reasonable capability in the prediction of the dynamic behavior of plant variables during operational transients of CANDU plant, which means that this simulation tool can be utilized as a basic framework for full scope simulation network through further improvements.

• 한국해양학회지
• /
• 제10권2호
• /
• pp.67-75
• /
• 1975

Tidal Flushing at the entrance channels of tidal bay or estuary in the central western coast of Korea; Gum River Estuary, Garorim Bay, Asan Bay, and Yeomha Estuary were studied with the recent data of current surveys measured by curret meter at three or five anchored stations along the section for one or two tidal periods at mean spring tide. Equilibrium relationship between tidal prism at mean spring tide and minimum flow area below the mean sea level of the channel in alluvial material was found as of O'Brien's (1931, 1969) study. Bed load transport in the tidal channel is balanced with the tidal flushing ability having a mean velocity of about 0.75m/sec or maximum velocity of about 1.25m/sec for a half tidal cycle over the section at mean spring tide which fairly agree with Brunn's study(1955, 1957). flushing actions for different hydraulic depth( mean depth) and bed material size in the channel were reviewed and found that it depend to a minor extent on the factors.

• 상하수도학회지
• /
• 제7권1호
• /
• pp.29-36
• /
• 1993

The complex nature of low flow mixing in natural channels has been investigated using both laboratory experiments and the numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing the mixing and mass exchange mechanisms. Laboratory experiments, which involved collection of channel geometry, hydraulic, and dye dispersion test data, were conducted in a model of four pool and riffle sequences in a 49-m long tilting flume. The experimental results show that flow over the model pool-riffle sequences is highly non-uniform. Concentration-time curves are significantly skewed with long tails. Comparison between measured and predicted concentration-time curves shows good agreement in the general shape, peak concentration and time to peak. The proposed model shows significant improvement over the conventional one-dimensional dispersion model in predicting natural mixing processes in open channels under low flow conditions through pools and riffles.

• Water Engineering Research
• /
• 제1권3호
• /
• pp.171-185
• /
• 2000

A mathematical model to adequately predict complex mixing characteristics of sorptive polluants in natural streams with pools-and-riffes has been developed. In this model, sorption of pollutants onto the bed sediment as well as mass storage and exchange in the storage zones were incorporated into one-dimensional mass balance equatins. The geometric and hydraulic characteristics of the pool-riffle sequences were properly conceptualized. Simulations with parameters of pool-and-riffle streams better fit the measured data in overall shape and peak concentration than simulations with parameters for uniform channels. The analyses on the characteristics of the storage zone model parameters reveal that a linear relationship between the logrithm of the storage zone volume ratio and a function of the friction factor exists. A linear relatiohship might also be tenatively assumed between the logarithm of the dimensionless mass exchange coefficient and the logarithm of the aspect ratio of the storage zone if some of the high values of the dimensionless mass exchange coefficient collected on the successive bed forms are excluded.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.888-890
• /
• 2009

This study presented a lab-scale apparatus for turbidity control in the lakes or reservoirs. Overall, the filamentous mat had a capture efficiency of 70~90% compared with the control group. Generally, the capture efficiency decreased with improved input turbidity flux. However, the attachment and sedimentation were thought to be the main processes for turbidity water retention and removal. Thus, the increase of hydraulic detention time in the mat zone is very important to improve the capture efficiency of the turbidity water.