The stability of a tunnel face is one of the most important factors in tunnel excavation. Especially, if a tunnel is located under groundwater level, groundwater may flow into the tunnel face and seepage forces acting on the tunnel face due to groundwater flow may affect seriously the stability of the tunnel face. Therefore, the seepage pressure at the tunnel face should be considered fir the proper design and safe construction of a tunnel. In this paper, the effect of tunnel advance rate on the seepage forces acting on the tunnel face was studied. The finite element program to analyze the groundwater flow around a tunnel with the consideration of tunnel advance rate was developed. Using the program, the parametric study for the effect of the tunnel advance rate and hydraulic characteristics of the ground on the seepage forces acting on the tunnel face was made. From this study, it was concluded that the tunnel advance rate must betaken into consideration as an additional parameter to assess the seepage forces at the tunnel face and a rational design methodology fer the assessment of support pressures required for maintaining the stability of the tunnel face was suggested for undetwater tunnels.
As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.
Proceedings of the Korean Society for Rock Mechanics Conference
/
2003.03a
/
pp.113-120
/
2003
The estimation of the coeff. of permeability is a major process that influenced in very large portion to the changing of gound water movement and estimation of the outflow’s quantity in the ground water movement modelling. To overcome the error caused by difficulty of the ground investigation for the hydraulic parameter’s estimation, in this paper, we study of correlation between electric resistivity and coeff. of permeability, and analyse of coeff. of permeability from electric resistivity. To accomplish this purpose, we carry out electrical logging, AMT survey as an in-situ test, and measure electric resistivity, porosity, permeability for the intact rock as a laboratory test. Based on the results of this research, it can be applied that estimation of the coeff. of permeability using electrical logging and AMT survey is a effective method for the impossible area of the ground investigation caused by geographical condition and petition.
Kim, Beom Jin;Ha, Chang Yong;Kim, Byung-hyun;Han, Kun Yeun
Proceedings of the Korea Water Resources Association Conference
/
2017.05a
/
pp.48-48
/
2017
도시지역에서는 이상강우, 돌발홍수와 더불어 급속한 도시화에 따라 침수 발생의 위험성이 증가하고 있다. 지자체에서는 빗물펌프장, 지하저류조 등을 이용하여 적극적으로 침수대책을 강구하고 있지만, 저지대 침수피해는 계속적으로 발생하고 있다. 2013년 7월 서울 경기북부 강원영서에 발생한 집중호우로 1명이 사망하고 피해액은 94,036백만원이 발생하였다. 춘천시 효자동 저지대지역의 주택침수는 인근 하천의 수위가 높아져 내수배제 및 하수도 처리 능력이 부족하여 침수가 발생하였다. 2014년 8월 경남지역에 발생한 집중호우로 2명 사망하였고, 피해액은 134,158백만원에 이르렀으며, 도시화 토지피복변화로 인한 홍수량이 증가하여 피해가 가중되었다. 이에 따라 도시 내 정확한 도시유출 및 침수해석을 통하여 과거 침수양상을 재현하고 앞으로 발생할 수 있는 침수피해를 방지할 수 있도록 침수 예 경보 시스템을 개발하여 도시침수에 대비하고 도시주민들의 인명과 재산피해를 경감하는데 그 목적이 있다. 이를 위해 도시지역의 관망해석에 적합한 모형을 선택하여야 하며, 그 모형의 매개변수를 결정하여야 한다. 도시유출해석 및 관망해석을 위하여 SWMM 모형을 선정해서 유역분할조건, 매개변수에 대한 최적 검정과정을 제시하여, 1D-2D 연계모형을 통해서 침수지역예측의 정확도를 증대시키고자 한다. 본 연구에서는 서울시 강남역 주변 일대의 5개 배수분구을 대상으로 도시유출해석을 위한 최적화 모의를 위하여 1D-2D모형의 연계해석하였다. 실제 강우사상을 적용하여 매개변수와 소유역 개수를 달리하여 자동최적화기법인 PEST를 이용하여 최적인자를 도출하여, 실제 배수맨홀의 수위관측 자료를 이용하여 비교 보정을 하였다. 도시유출해석뿐만 아니라 내수침수시의 최적인자 도출을 위해 2차원 범람해석을 통하여 NDMS 자료를 이용하여 비교 보정을 한 뒤 다른 강우사상을 이용하여 검증을 하여 도시침수 해석의 정확도를 개선을 위한 최적인자들을 검토하였다.
It takes a long period to conduct the test on soil water retention curve (SWRC) in unsaturated soils. To improve such a problem, the high air entry disk has been replaced by micro-membrane. After the soil water retention test, the results by the micro-membrane were compared with those by the ceramic disk. Multiple samples in 5 regions were used to validate that SWRCs by micro-membrane are equivalent to those by ceramic disk. Therefore, a quick procedure based on micro-membrane has been developed, which makes it available to acquire much soil water retention data. The data of SWRCs were obtained for total 29 samples using ceramic disk or micro-membrane. For Korean weathered soils, the unsaturated hydraulic characteristics are sorted by three groups. Based on van Genuchten model, the group is divided by the parameter n, and the value of n could be correlated to the void ratio as each function.
Journal of the Korean Society of Systems Engineering
/
v.16
no.2
/
pp.97-109
/
2020
On March 11, 2011, an earthquake followed by a tsunami caused an extended station blackout (SBO) at the Fukushima Dai-ichi NPP Units. The accident was initiated by a total loss of both onsite and offsite electrical power resulting in the loss of the ultimate heat sink for several days, and a consequent core melt in some units where proper mitigation strategies could not be implemented in a timely fashion. To enhance the plant's coping capability, the Diverse and Flexible Strategies (FLEX) were proposed to append the Emergency Operation Procedures (EOPs) by relying on portable equipment as an additional line of defense. To assess the success window of FLEX strategies, all sources of uncertainties need to be considered, using a physics-based model or system code. This necessitates conducting a large number of simulations to reflect all potential variations in initial, boundary, and design conditions as well as thermophysical properties, empirical models, and scenario uncertainties. Alternatively, data-driven models may provide a fast tool to predict the success window of FLEX strategies given the underlying uncertainties. This paper explores the applicability of Artificial Intelligence (AI) to identify the success window of FLEX strategy for extended SBO. The developed model can be trained and validated using data produced by the lumped parameter thermal-hydraulic code, MARS-KS, as best estimate system code loosely coupled with Dakota for uncertainty quantification. A Systems Engineering (SE) approach is used to plan and manage the process of using AI to predict the success window of FLEX strategies under extended SBO conditions.
As an important device in the nuclear island, the nuclear coolant pump can continuously provide power for medium circulation. The vane is one of the stationary parts in the nuclear coolant pump, which is installed between the impeller and the casing. The shape of the vane plays a significant role in the pump's overall performance and stability which are the important indicators during the safety serve process. Hence, the bionic concept is firstly applied into the design process of the vane to improve the performance of the nuclear coolant pump. Taking the scaled high-performance hydraulic model (on a scale of 1:2.5) of the coolant pump as the reference, a united bionic design approach is proposed for the unique structure of the guide vane of the nuclear coolant pump. Then, a new optimization design platform is established to output the optimal bionic vane. Finally, the comparative results and the corresponding mechanism are analyzed. The conclusions can be gotten as: (1) four parameters are introduced to configure the shape of the bionic blade, the significance of each parameter is herein demonstrated; (2) the optimal bionic vane is successfully obtained by the optimization design platform, the efficiency performance and the head performance of which can be improved by 1.6% and 1.27% respectively; (3) when compared to the original vane, the optimized bionic vane can improve the inner flow characteristics, namely, it can reduce the flow loss and decrease the pressure pulsation amplitude; (4) through the mechanism analysis, it can be found out that the bionic structure can induce the spanwise velocity and the vortices, which can reduce drag and suppress the boundary layer separation.
Proceedings of the Korea Water Resources Association Conference
/
1998.05b
/
pp.3-3
/
1998
In this pressentation it is argued that the heterogeneity of a hydrologic attribute which may seem to be nonstationary at one scale, may become stationary at a larger scale. The fundamental reason for transformation from nonstationarity to stationarity whith the increase in scale is the phenomenon of coarse-graining of the hydrologic processes with increasing scale. Due to the phenomenon of aliasing, a particular scale hydrologic process heterogeneity which is observed as a nonstationary process at that scale, may be observed as a stationary process at a higher(larger) scale whose size is bigger than the stationary extent of the lower scale heterogeneity. As one goes through a hierarchical sequence of larger and larger scales for observations, one would eliminate nonstationarities which emerge at some lower scales at the expense of losing information on the high frequency fluctuations of the lower scale heterogeneities which will no longer be observed at the larger sampling scales. We call this phenimenon as the "coarse-graining in hydrologic observations". In this presentation, it is also argued that by the coarse-graining of hydrologic processes due to the averaging and aliasing operations at increasing scales, the conservation laws corresponging to these scales may still be quite parsimonious, and need not be more complicated as the scales get larger. It is shown that shen a higher(larger) scale process is formed by averaging a lower(smaller) scale process in time or space, the high frequency components of the lower scale process will be eliminated by the averaging operation. Thereby, the resuliiting average hydrologic dynamics, free from the effects of the high frequency components of the lower scale process, can still be quite simple in form. This is demonstrated by means of some recent upscaling work on the solute teansport conservation equation for hetergeneous aquifers. By means of this solute transport example, it is also shown that for the ensemble average form of a hydrologic conservation equation to be equivalent to its volume-average form at any scale, the parameter functions of that conservation equation at the immediately lower scale must be ergodic.
Proceedings of the Korea Water Resources Association Conference
/
2020.06a
/
pp.240-240
/
2020
강우 시 우수관로 내부의 수리 거동(유속, 수위)에 영향을 미치는 대표적인 매개변수는 관로의 조도계수와 손실계수 등이 있다. 이 중 조도계수는 관로 내부의 퇴적 및 협잡물로 인한 조도높이 변화에 따른 관로 내의 수리학적 거동을 평가할 수 있는 매개변수이며 손실계수는 관로의 확대, 축소, 만곡 등에 의한 에너지 감쇄 효과에 따른 관로 내 수리학적 변화를 평가할 수 있는 매개변수이다. 본 연구에서는 서울시 주요 배수구역에 대해 관로 조도계수 및 손실계수 변화에 따른 수위, 유속 변동성을 SWMM으로 분석하였다. 연구에 적용한 대상 배수구역은 반포 02 (방배1), 안양천 13 (봉천1), 성내 05 (길동), 안양천 11(신림4), 반포 03 (방배2), 안양천 01 (오류1), 성내 03 (천호)로 총 7개 배수구역이다. 모형수행을 위한 조건으로 조도계수는 0.015 ~ 0.120 구간에 대해 0.003 단위로 증가시키며 총 12개 CASE를 적용하였으며 손실계수는 0.0 ~ 0.5 구간에 대해 0.1 단위로 총 6개 CASE를 적용하였다. 관로 수리특성에 따른 수심, 유속의 변화량 분석 결과는 관로 및 유역의 크기별로 변화의 폭이 매우 크므로 상자-수염그림(Box-whisker plot) 이용하여 중간값의 변화 정도를 검토하였다. 조도계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.013에서 0.034로 증가 시 수심은 40.6% 증가하고 유속은 47.4% 감소하는 것으로 검토되었다(그림 1, 2). 한편, 손실계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.0에서 1.6으로 증가시 수심은 15.7% 증가하고 유속은 15.0% 감소하는 것으로 검토되었다. 이상과 같은 연구의 성과는 우수관로 내부의 다양한 여건 변화가 강우 시 관로 내 수리특성에 미치는 영향을 판단하기 위한 기초 자료로 활용할 수 있으며 향후, 우수관로 모니터링 결과와 연계하여 유지관리 방안 수립에 활용할 수 있을 것으로 판단된다.
An artificial rainwater reservoir installed in urban areas for recycling rainwater is an eco-friendly facility for reducing storm water effluence. However, in order to recycle the rainwater directly, the artificial rainwater reservoir requires an auxiliary system that can remove non-point source pollutants included in the initial rainfall of urban area. Therefore, the conventional soil filtration technology is adopted to capture non-point source pollutants in an economical and efficient way in the purification system of artificial rainwater reservoirs. In order to satisfy such a demand, clogging characteristics of the sand filter layers with different grain-size distributions were studied with real non-point source pollutants. For this, a series of lab-scale chamber tests were conducted to make a prediction model for removal of non-point source pollutants, based on the clogging theory. The laboratory chamber experiments were carried out by permeating two types of artificially contaminated water through five different types of sand filter layers with different grain-size distributions. The two artificial contaminated waters were made by fine marine-clay particles and real non-point source pollutants collected from motorcar roads of Seoul, Korea. In the laboratory chamber experiments, the concentrations of the artificial contaminated water were measured in terms of TSS (Total Suspended Solids) and COD (Chemical Oxygen Demand) and compared with each other to evaluate the performance of sand filter layers. In addition, the accumulated weight of pollutant particles clogged in the sand filter layers was estimated. This paper suggests a prediction model for removal of non-point source pollutants with theoretical consideration of the physical characteristics such as the grain-size distribution and composition, and change in the hydraulic conductivity and porosity of sand filter layers. The lumped parameter ${\theta}$ related with the clogging property was estimated by comparing the accumulated weight of pollutant particles obtained from the laboratory chamber experiments and calculated from the prediction model based on the clogging theory. It is found that the lumped parameter ${\theta}$ has a significant influence on the amount of the pollutant particles clogged in the pores of sand filter layers. In conclusion, according to the clogging prediction model, a double-sand-filter layer consisting of two separate layers: the upper sand-filter layer with the effective particle size of 1.49 mm and the lower sand-filter layer with the effective particle size of 0.93 mm, is proposed as the optimum system for removing non-point source pollutants in the field-sized artificial rainwater reservoir.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.