• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.19-22
• /
• 2011

For underground structures that are exposed to environmental conditions, the declination of the durability of concrete occurs easily because of leakages from high hydraulic pressure and the frequent contact of water due to environmental factors. Therefore this study is to confirm that the leakage reduction of natural inorgnic powder compound applying subsurface structural weak part and make the performance improvement of concrete as an objective. The test was done by making the rebar, flat tie, nail and film infiltration and each of its water tank and cylindrical test body then after pouring water to each of the test body, the test observe the change of the water tank surface absorbed condition and leakage of each specimen with respect to time. As a conclusion, the test was observed that this water proofing admixture has better watertightness from the beginning of the setting time(when it hardens), the ettringite and the thaumasite generates a large quantity of hydration products that controls the formation in a large opening and the CSH produced by pozzolan reaction makes a dent at this opening.

• Computers and Concrete
• /
• v.16 no.2
• /
• pp.261-274
• /
• 2015

This study established the standard recommended values and expansion fracture threshold values for the content of steel slag in controlled low-strength materials (CLSM) to ensure the appropriate use of steel slag aggregates and the prevention of abnormal expansion. The steel slags used in this study included basic oxygen furnace (BOF) slag and desulfurization slag (DS), which replaced 5-50% of natural river sand by weight in cement mixtures. The steel slag mortars were tested by high-temperature ($100^{\circ}C$) curing for 96 h and autoclave expansion. The results showed that the effects of the steel slag content varied based on the free lime (f-CaO) content. No more than 30% of the natural river sand should be replaced with steel slag to avoid fracture failure. The expansion fracture threshold value was 0.10%, above which there was a risk of potential failure. Based on the scanning electron microscopy (SEM) analysis, the high-temperature catalysis resulted in the immediate extrusion of peripheral hydration products from the calcium hydroxide crystals, leading to a local stress concentration and, eventually, deformation and cracking.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.97-104
• /
• 2021

This study aims to develop non-sintered cement that can replace the Portland cement by utilizing industrial by-products. As a suggestion, the physical properties of non-sintered cement mortar depending on the curing method were investigated with ground granulated blast furnace slag, class C fly ash, and class F fly ash. As a result of the study, it was found that the strength performance and absorption rate were improved through the heat treatment process after steam curing. It was confirmed through crystal phase analysis that the hydration was accelerated after heat treatment, and the bonding material formed a dense internal structure.

• Computers and Concrete
• /
• v.23 no.5
• /
• pp.351-359
• /
• 2019

In this study, the calcium hydroxide, an inherent product of cement hydration, was treated using biomimetic carbonation method of incorporating stearic acid to generate the hydrophobic calcium carbonate on concrete surface. Carbonation reaction was carried out at various $CO_2$ pressure and temperatures and utilizing the Scanning Electron Microscope (SEM), chloride-ion penetration test apparatus, and compression test machine to investigate the hydrophobicity, durability, and mechanical properties of the synthesized products. Experimental results indicate that the calcium stearate may change the surface property of concrete from hydrophilicity to hydrophobicity. Increasing reaction temperature can change the particles from irregular shapes to needle-rod structures with increased shear stress and thus favorable to hydrophobicity and microhardness. The contact angle against water for the concrete surface was found to increase with increasing $CO_2$ pressure and temperature, and reached to an optimum value at around $90^{\circ}C$. The maximum static water contact angle of 128.7 degree was obtained at the $CO_2$ pressure of 2 atm and temperature of $90^{\circ}C$. It was also found that biomimetic carbonation increased the permeability, acid resistance and chloride-ion permeability of the concrete material. These unique results demonstrate that the needle-rod structures of $CaCO_3$ synthetized on concrete surface could enhance hydrophobicity, durability, and mechanical properties of concrete.

• Advances in concrete construction
• /
• v.11 no.2
• /
• pp.163-171
• /
• 2021

This paper studies the effect of using multi-scale reinforcement additives on mechanical strengths, damage performance, microstructure, and water absorption of cementitious composites. Small dosages of carbon nanotubes (CNTs) or polypropylene (PP) microfibers; 0.05%, 0.1%, and 0.2% by weight of cement; were added either separately or simultaneously into cement mortar. The experimental results show the ability of these additives to enhance the mechanical behavior of the mortar. The best improvement in compressive and flexural strengths of cement mortar reaches 28% in the case of adding a combination of 0.1% CNTs and 0.2% PP fibers for compression, and a combination of 0.2% CNTs and 0.2% PP fibers for flexure. Adding CNTs does not change the brittle mode of failure of plain mortar whereas the presence of PP fibers changes it into ductile failure and clearly enhances the fracture energy of the specimens. Scanning electron microscopic (SEM) images of the fracture surfaces highlights the role of CNTs in improving the adhesion between the PP fibers and the hydration products and thus enhance the ability of the fibers to mitigate cracks propagation and to enhance the mechanical performance of the mortar.

• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.601-613
• /
• 2023

Low liquid limit silt, widely distributed in the middle and down reaches of Yellow River, has the disadvantages of poor grading, less clay content and poor colloidal activity. It is very easy to cause vehicle jumping at the bridge-embankment transition section when the low liquid limit silt used as the backfill at the abutment back. In this paper, a series of laboratory tests were carried out to study the physical and mechanical properties of the low liquid limit silt used as back filling. Ground granulated blast furnace slag (GGBFS) was excited by active MgO and hydrated lime to solidify silt as abutment backfill. The optimum ratio of firming agent and the compaction and mechanical properties of reinforced soil were revealed through compaction test and unconfined compressive strength (UCS) test. Scanning electron microscope (SEM) test was used to study the pore characteristics and hydration products of reinforced soil. 6% hydrated lime and alkali activated slag were used to solidify silt and fill the model of subgrade respectively. The pavement settlement regulation and soil internal stress-strain regulation of subgrade with different materials under uniformly distributed load were studied by model experiment. The effect of alkali activated slag curing agent on curing silt was verified. The research results can provide technical support for highway construction in silt area of the Yellow River alluvial plain.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1630-1636
• /
• 2009

Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)₂) and barium hydroxide (Ba(OH)₂) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)₂ led to the formation of 2CaO·Al₂O₃·SiO₂·8H₂O (C₂ASH₈) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.

• Geomechanics and Engineering
• /
• v.33 no.4
• /
• pp.401-414
• /
• 2023

Organic clays are ideal habitat for flora and fauna. From a geotechnical perspective, organic clays are soft, weak, variable, heterogeneous and flocculated. Portland cement is a universally common stabiliser. However, some organic acids in soil inhibit full hydration and expose cementation products to rapid dissolution. This paper investigates scopes for use of C₃S cement to enable durable cementation. Prospects of using PP fibre alongside with C₃S cement, scopes for partial replacement of C₃S cement with a plant-based nanosilica and evolution of binders are then investigated. Binding mixtures here mimic the natural functions of rhizoliths, amorphous phases, and calcites. Testing sample population include natural and fibre-reinforced clays, compact mixes of clay - C₃S cement, clay - nanobiosilica, and clay, C₃S cement and nanobiosilica. Benefits and constraints of C₃S cement and fibres for retaining the naturally flocculated structure of organic clays are discussed. Nanobiosilica provides an opportunity to cut the C₃S content, and to transition of highly compressive organic clays into an engineered, open-structured medium with >0.5 MPa compressive strength across the strains spanning from peak to 1.5-times peak.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.420-429
• /
• 2018

Skin ageing is associated with compromised performance of its fundamental barrier functions, with undesirable changes in appearance. Since this may introduce a detrimental impact on the quality of life, significant effort to discover effective ingredients against ageing is being invested. Recently, collagen hydrolysates containing tripeptides such as GlyPro-Hyp (GPH) have been developed with anticipation of improved effects compared to that of existing collagen hydrolysate-products. To evaluate the cutaneous hydration effect of collagen tripeptides (CTP), meaningful biomarkers in human dermal fibroblasts (HDF) and NC/Nga Tnd mice were analyzed in this study. Increased levels of ceramide kinase, hyaluronic acid, collagen 1A, and hyaluronan synthase-2 (HAS2), and decreased levels of hyaluronidase-1 (HYAL1) and CD44 in HDF cells were demonstrated. Furthermore, significant reduction of transepidermal water loss (TEWL), scratching behavior, HYAL1, $TNF-{\alpha}$ and IL-6 and increased water content and HAS2 were verified by in vivo tests. These results strongly suggest the potential of CTP as a skin hydration agent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.157-165
• /
• 2010

In this study, the antioxidative effects, inhibitory effects on tyrosinase and elastase of Rhododendron brachycarpum D. Don extracts were investigated. And the moisturizing effect of cream containing R. brachycarpum D. Don extract were investigated by clinical trial. The ethyl acetate fraction of R. brachycarpum D. Don extract (1.83 ${\mu}g/mL$) showed the most prominent the free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity ($FSC_{50}$). Reactive oxygen species (ROS) scavenging activities ($OSC_{50}$) of R. brachycarpum D. Don extracts on ROS generated in $Fe^{3+}$-EDTA/$H_2O_2$ system were investigated using the luminol-dependent chemiluminescence assay. The 50 % extract fraction (0.064 ${\mu}g/mL$) showed the most prominent ROS scavenging activity. The protective effects of extract/fractions of R. brachycarpum D. Don on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The R. brachycarpum D. Don extracts suppressed photohemolysis in a concentration dependent manner (1 ~ 10 ${\mu}g/mL$). The inhibitory effects ($IC_{50}$) of R. brachycarpum D. Don extracts on tyrosinase were determined with ethyl acetate fraction of R. brachycarpum D. Don extract (70.5 ${\mu}g/mL$) and aglycone fraction of extract (122.40 ${\mu}g/mL$). The inhibitory effects ($IC_{50}$) on elastase were determined with ethyl acetate of R. brachycarpum D. Don extract (43.50 ${\mu}g/mL$) and aglycone fraction of extract (20.73 ${\mu}g/mL$). The cream containing the ethyl acetate fraction of R. brachycarpum D. Don extracts was formulated for skin hydration effect and transepidermal water loss (TEWL). The cream containing R. brachycarpum D. Don extract was applied to the right lower arm. After 180 min, the water contents in skin were increased by 1 ~ 4 % than the placebo cream. And TEWL of parts was decreased as 7.7 $g/m^2h$ (experimental cream) and 8.9 $g/m^2h$ (placebo cream) respectively. These results indicate that extract/fractions of R. brachycarpum D. Don can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS. And inhibitory activity on tyrosinase of the aglycone fraction could be applicable to new functional cosmetics for whitening and anti-wrinkle products. Also the increase of skin hydration of the cream containing extract could be applicable to new functional cosmetics for antiaging.