• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.105-111
• /
• 2024

We investigate the effect of photon loss on pair production in a hybrid atom-light system. The loss of light field not only affects the generation of photons, but also prevents the generation of atomic collective excitation, although the atoms are not influenced directly. We propose an unbalanced homodyne detection of the number of atomic collective excitation that overcomes the challenge caused by counting uncertainty in practical measurement. In discussion, we show that the intermode correlations and the number correlation is closely related to the initial input state, while the quadrature correlations are independent of the initial state and always exhibit opposite intermode correlations even in the presence of loss.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.781-785
• /
• 1989

In the field of control technology, too, it is about time that the students should free themseleves from the paradigm of Newtonian mechanics. Otherwise, they might fail to grasp the essence of control. Now, let us consider the essence of control. Control consists of manipulating a particular object, matter, energy of environment on the basis of certain medium information. (measurement data, force, etc.) So, we shall look into the methods of manipulation. Here, we consider natural control, constraining control, and hybrid control as basic methods of manipulation. In this paper, we would like to put forward the daring proposal that it's called a Holon-type hybrid control system. It is intended to control a plat with complicated or unknown characteristics where a conventional control theory is not easy to apply. A prototype system has been developed and applied to a real plant. The control system is a multi-layer system. Each layer includes different control input. The important features of the system are as follows: 1) Each layer behaves autonomously and also cooperates with each other to optimize the whole plant. 2) The controller optimizes a plant without mathematical models when these models are not easy to obtain.

• 한국의류학회지
• /
• 제46권5호
• /
• pp.827-835
• /
• 2022

Clothing pressure is considered the essential factor affecting the comfort of clothing, so it is crucial that it is measured precisely. The purpose of this study is to construct a prototype using the Adafruit Flora as the Arduino system, which can be used as a wearable framework for easy, low-cost, and precise clothing pressure measurement. The study also aims to determine how best to conduct the procedure of sensor calibration. To optimize the accuracy of the sensors, the calibration procedure was implemented using mathematical methods that combined polynomial and exponential regression in a hybrid approach. The prototype can easily measure clothing pressure even during active movements, as seen in the detection of stable signals. In addition, since the system was specifically proposed as a wearable patch that can be easily attached and removed as necessary, it can also be used to standardize the value of clothing pressure in each movement.

• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.564-573
• /
• 2015

위치 정보를 제공하는 대표적인 측위 기술은 GPS다. 이 기술은 밀도가 높은 도심이나 숲, 그리고 실내와 같은 음영지역에서는 동작하지 않는 단점이 있다. 본 논문은 실내의 AP로 부터의 Wi-Fi 신호의 세기를 이용하여 보다 정확한 단말의 위치를 추정하게 해주는 실내 측위 하이브리드 알고리즘을 제안한다. 사용자의 위치를 결정하기 위해 건물 구조, 사람, 거리 등 다양한 환경에서 측정한 RSSI (received signal strength indicator) 값을 이용하여 측정 환경에 맞는 가장 적절한 경로손실모델을 수립한다. 이러한 경로 손실 모델에서 구해진 경로손실지수를 환경에 따라 변화시켜, AP로 부터 얻은 측정값을 이용하여 REKF (robust extended kalman filter)와 PF (particle filter) 알고리즘을 사용하여 단말기의 위치를 추정하게 된다. 보다 더 정확한 위치 추정을 위해 하나의 측위 방식만을 사용하지 않고, 실험을 통하여 구해진 임계값에 따라 어떠한 측위방식을 사용할 것인지를 결정한다. 제안한 하이브리드 알고리즘을 이용하여 실험한 결과 기존의 단일 측위 방식 보다 평균 17% 성능이 향상 되는 것을 볼 수 있었다.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.494-502
• /
• 2011

바이모달 저상굴절 트램은 자동운전으로 일반도로와 전용구간을 주행할 수 있는 고무차륜방식의 저상굴절 차량으로서, 철도의 정시성과 버스의 접근성을 동시에 구현할 수 있는 신교통수단이다. 바이모달 트램은 전자기 궤도를 사용한 자동운전, 전차륜 조향과 함께 CNG 엔진과 리튬 폴리머 배터리 팩을 사용한 친환경 직렬형 하이브리드 추진시스템을 사용한다. 본 논문에서는 바이모달 트램의 직렬형 하이브리드 추진시스템 개발에 대해 기술하고 시험선및 일반도로에서 수행된 시험 결과를 분석한다. 또한 바이모달 트램 추진장치의 튜닝 및 시험데이터 취득을 위해 개발된 계측장비의 구성 및 동작방식에 대해 설명한다. 시작차량에 설치된 계측장비의 데이터를 기초로 전용 시험 선과 일반도로에서 주행시 직렬형 하이브리드 추진시스템의 동작을 확인하며, 차량의 연비 및 엔진 효율을 계산한다.

• 한국분무공학회지
• /
• 제28권4호
• /
• pp.184-190
• /
• 2023

The European Union has instituted a new emission standard protocol that necessitates real-time measurements from vehicles on actual roads. The adequate development of routes for real driving emissions (RDE) mandates substantial resources, encompassing both vehicles and a portable emission measurement system (PEMS). In this study, a simulation tool was utilized to predict the vehicle speed traversing the routes developed for the RDE measurements. Initially, the vehicle powertrain system was modeled for both a gasoline hybrid vehicle and a gasoline engine-only vehicle. Subsequently, the speed profile for the specified vehicle was constructed based on the RDE route developed for the EURO-6 standard. Finally, the predicted vehicle speed profiles for highway and urban routes were assessed utilizing the actual driving data. The driving model predicted more consistency in the vehicle speed at each driving section. Meanwhile, the human driver tended to accelerate further, and then decelerate in each section, instead of cruising at a predicted section speed.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.76-82
• /
• 2015

A hybrid fiber-optic sensor system which combines fiber Bragg grating sensors and a Michelson interferometer has been constructed and evaluated for condition monitoring of large scale wind turbines. In order to measure multiple stresses applied to wind turbines such as strain, temperature and vibration, the system uses single broadband light source. It addresses both types of sensors, which simplifies the optical setup and enhances the cost-effectiveness of condition monitoring system. An athermal-packaged FBG is used to supply quasi-coherent light, of which coherence length is about 3.28mm, for the Michelson interferometer demodulation. Experimental results demonstrated that the proposed fiber-optic sensor system was capable of measuring strain and temperature with measurement accuracy of 1pm. Also 500~2000Hz vibration signals were successfully analyzed by applying FFT signal processing to interference signals.

• Smart Structures and Systems
• /
• 제25권5호
• /
• pp.569-580
• /
• 2020

The identification of delays and delay compensation are critical problems in real-time hybrid simulations (RTHS). Conventional delay compensation methods are mostly based on the assumption of a constant delay. However, the system delay may vary during tests owing to the nonlinearity of the loading system and/or the behavioral variations of the specimen. To address this issue, this study presents an adaptive delay compensation method based on a discrete model of the loading system. In particular, the parameters of this discrete model are identified and updated online with the least-squares method to represent a servo hydraulic loading system. Furthermore, based on this model, the system delays are compensated for by generating system commands using the desired displacements, achieved displacements, and previous displacement commands. This method is more general than the existing compensation methods because it can predict commands based on multiple displacement categories. Moreover, this method is straightforward and suitable for implementation on digital signal processing boards because it relies solely on the displacements rather than on velocity and/or acceleration data. The virtual and real RTHS results show that the studied method exhibits satisfactory estimation smoothness and compensation accuracy. Furthermore, considering the measurement noise, the low-order parameter models of this method are more favorable than that the high-order parameter models.

• 한국통신학회논문지
• /
• 제38C권8호
• /
• pp.663-673
• /
• 2013

무선인터넷과 이동통신 기술의 발달 및 스마트폰의 급속한 확산으로 인해 사용자의 현재 및 과거의 위치 정보를 사용하여 다양한 부가정보를 제공하는 위치기반 서비스에 대한 관심이 급증하고 있다. 위치기반 서비스의 본격적인 활성화를 위해서는 정확한 측위가 기본이 된다. GPS (Global Positioning System)과 WPS (Wi-Fi Positioing System)가 상용화 되면서 측위 기술에 일대 혁신을 가져왔으나 실내환경에서 많은 제약을 가졌다. 이에 관성센서(IMU: Inertia Motion Unit)를 사용한 네비게이션 (Navigation)기술을 실내환경에서 응용하려는 시도가 정밀 측위의 관점에서 논의되고, 관성센서의 장착이 스마트폰에 일상화 되면서 실내 정밀 측위 확산의 시초를 갖게 되었다. 본 논문에서는 IMU와 WPS를 결합하여 각각의 단점을 극복하고 측위 품질을 혁신적으로 향상 시킬 수 있는 알고리즘 프레임워크를 제안한다. 본 연구를 위해 스마트폰에서 구현되는 측위 테스트 프로그램을 구현하고 이를 적용할 실질적인 실내외 테스트베드를 구성하여 활용하였으며 이로서 대규모로 확장 적용할 수 있는 기반을 구성했다는 면에서 충분한 의미를 지닌다.

• Journal of Korean Neurosurgical Society
• /
• 제46권2호
• /
• pp.144-151
• /
• 2009

Objective: To compare two testing protocols for evaluating range of motion (ROM) changes in the preloaded cadaveric spines implanted with a mobile core type Charite$^{TM}$ lumbar artificial disc. Methods: Using five human cadaveric lumbosacral spines (L2-S2), baseline ROMs were measured with a bending moment of 8 Nm for all motion modes (flexion/extension, lateral bending, and axial rotation) in intact spine. The ROM was tracked using a video-based motion-capturing system. After the Charite$^{TM}$ disc was implanted at the L4-L5 level, the measurement was repeated using two different methods: 1) loading up to 8 Nm with the compressive follower preload as in testing the intact spine (Load control protocol), 2) loading in displacement control until the total ROM of L2-S2 matches that when the intact spine was loaded under load control (Hybrid protocol). The comparison between the data of each protocol was performed. Results: The ROMs of the L4-L5 arthroplasty level were increased in all test modalities (p < 0.05 in bending and rotation) under both load and hybrid protocols. At the adjacent segments, the ROMs were increased in all modes except flexion under load control protocol. Under hybrid protocol, the adjacent segments demonstrated decreased ROMs in all modalities except extension at the inferior segment. Statistical significance between load and hybrid protocols was observed during bending and rotation at the operative and adjacent levels (p< 0.05). Conclusion: In hybrid protocol, the Charite$^{TM}$ disc provided a relatively better restoration of ROM, than in the load control protocol, reproducing clinical observations in terms of motion following surgery.