• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.19-19
• /
• 2004

햅틱장치는 가상환경이나 원거리에 있는 환경과 사용자가 상호 작용할 매 촉감이나 힘을 전달하는 장치이다. 사용자에게 힘을 제시하기 위한 액츄에이터는 모터와 브레이크가 많이 사용되는데, 각각의 특성에 맞게 제어하여 성능과 안정성을 동시에 만족시켜야 한다 모터와 같은 능동 액츄에이터는 토크를 원하는 방향으로 쉽게 출력할 수 있지만, 동작 중 불안정한 상태가 발생할 수 있다. 반면에 브레이크와 같은 수동 액츄에이터는 회전에 반대되는 방향으로만 토크를 발생시킬 수 있지만, 동작 중 에너지를 계속 소모하기 때문에 시스템이 본질적으로 안정하다.(중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.211-232
• /
• 2003

연료전지 개발 필요성; "One of the most important technologies for the early 21st century" - Bill Clinton, "Not only to encourage research and development, but to provide tax credits to enhance the marketplace of hybrid and fuel-cell vehicles" - Bush. 연료전지 장점 - 에너지 변환 고효율(70%), 무/저공해 발전, 높은 에너지 저장력 (고용량), 시장환경 - 석유 자원 유한, 환경오염에 따른 무공해 에너지원 필요, Portable Device의 장시간 사용 Needs.(중략)

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.391-402
• /
• 2023

Low-dimensional (zero-dimensional (0-dim), 2-dimensional (2-dim)) nanoparticles, such as chalcogenide compound semiconductors, III-V semiconductors, transition metal dichalcogenides (TMDs), II-VI semiconductors, nanocarbons, hybrid quantum dots (QDs), and perovskite QDs (PQDs), for which blue light emission has been observed, are reviewed. Current synthesis and device fabrication technologies as well as their prospective applications on next-generation quantum-dot-based light-emitting diodes are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.429-432
• /
• 2012

Mobile devices diffusion begins by the iPhone and spreads by the Android. A widely used mobile devices is Smartphone(iPhone, Android, Bada, WindowPhone7, BlackBerry, etc) and Tablet(iPad, Android). In the past, we have developed a dedicated application for device. But, Now we must develop a application by considering the characteristics of the operating system. Accordingly, many problems occurred and other developmet methods have emerged. In this paper, we learn about MobileHybridApp development tool-oriented One Source Multi Use-and compare the differences, propose a method to develop context-sensitive.

• Electronics and Telecommunications Trends
• /
• v.35 no.4
• /
• pp.1-10
• /
• 2020

Since the 1960s, semiconductor packaging technology has developed into electrical joining techniques using lead frames or C4 bumps using tin-lead solder compositions based on traditional reflow processes. To meet the demands of a highly integrated semiconductor device, high reliability, high productivity, and an eco-friendly simplified process, packaging technology was required to use new materials and processes such as lead-free solder, epoxy-based non cleaning interconnection material, and laser based high-speed processes. For next generation semiconductor packaging, the study status of two epoxy-based interconnection materials such as fluxing and hybrid underfills along with a laser-assisted bonding process were introduced for fine pitch semiconductor applications. The fluxing underfill is a solvent-free and non-washing epoxy-based material, which combines the underfill role and fluxing function of the Surface Mounting Technology (SMT) process. The hybrid underfill is a mixture of the above fluxing underfill and lead-free solder powder. For low-heat-resistant substrate applications such as polyethylene terephthalate (PET) and high productivity, laser-assisted bonding technology is introduced with two epoxy-based underfill materials. Fluxing and hybrid underfills as next-generation semiconductor packaging materials along with laser-assisted bonding as a new process are expected to play an active role in next-generation large displays and Augmented Reality (AR) and Virtual Reality (VR) markets.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.169-172
• /
• 2005

A flywheel system is an electromechanical energy storage device that stores energy by rotating a rotor. The rotating part, supported by magnetic bearings, consists of the metallic shaft, composite rims of fiber-reinforced materials, and a hub that connects the rotor to the shaft. The delamination in the fiber wound composite rotor often lowered the performance of the flywheel energy storage system. In this work, an advanced hybrid composite rotor with a split hub was designed to both overcome the delamination problem in composite rim and prevent separation between composite rim and metallic shaft within all range of rotational speed. It was analyzed using a three-dimensional finite clement method. In order to demonstrate the predominant perfom1ance of the hybrid composite rotor with a split hub, a high spin test was performed up to 40,000 rpm. Four radial strains and another four circumferential strains were measured using a wireless telemetry system. These measured strains were in excellent agreement with the FE analysis. Most importantly, the radial strains were reduced using the hybrid composite rotor with a split hub, and all of them were compressive. As a conclusion, a compressive pressure on the inner surface of the proposed flywheel rotor was achieved, and it can lower the radial stresses within the composite rotor, enhancing the performance of the flywheel rotor.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.75-86
• /
• 2006

The MANET that can make autonomous distributed Network with Routing function has many differences than past wireless communication. For upcoming ALL-IP environment, MANET device should be connected with wired Internet Network and MANET is required to have a gateway to bridge two different networks to share information from any place. In this paper, Using the GMAHN Algorithm proposed Proactive, Reactive, Hybrid method that provides Inteface between Wired Internet network and MANET, we learned each method's the advantage and disadvantage through the various network environments. And also, we presented the optimization method of Hybrid combined Proactive with Reactive.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.23-31
• /
• 2011

Recently, Solid state disk is mainly used because this device has lower power consumption as well as higher response time. But it features higher price and lower performance at delete and write operations compared with HDD. To compensate this defect, Hybrid hard disk with internal non-volatile flash memory was issued. This NVCache is used as a kind of cache for disk blocks. In this paper, an I/O scheme for H-HDD is proposed for improving low power consumption as well as response time. Our method is to use this NVCache as read cache mainly and write cache when write requests are concentrated. In read cache operation, disk blocks with higher priority determined on basis of time as well as spatial localities are prefetched, which can improve response time. The write operation is conducted only at write peak time as disk spindle up costs higher battery power as well as response time. Experiments results show that the suggested method can improve response time of H-HDD and lower the power consumption.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2013

Variety of smart devices including smart phone have become and essential item in user's daily life. This means that smart devices are good mediators to get collecting user's behavior by sensors mounted on the devices. The information from smart devices is important clues to identify by analyzing the user's preferences and needs. Through this, the intelligent service which is fitted to the user is possible. This paper propose a smart service recommendation model based on user scenario using fusion context-awareness. The information for recommendation services is collected to make the scenario depending on time, location, action based on the Fusion process. The scenarios can help predict a user's situation and provide the services in advance. Also, content categories as well as the content types are determined depending on the scenario. The scenario is a method for providing the best service as well as a basis for the user's situation. Using this method, proposing a smart service model with the fusion context-awareness based on the hybrid sensing is the goal of this paper.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.4
• /
• pp.459-469
• /
• 2016

Gas hydrate desalination process is based on a liquid to solid (Gas Hydrate, GH) phase change followed by a physical process to separate the GH from the remaining salty water. The GH based desalination process show 60.5-90% of salt rejection, post treatment like reverse osmosis (RO) process is needed to finally meet the product water quality. In this study, the energy consumption of the GH and RO hybrid system was investigated. The energy consumption of the GH process is based on the cooling and heating of seawater and the heat of GH formation reaction while RO energy consumption is calculated using the product of pressure and flow rate of high pressure pumps used in the process. The relation between minimum energy consumption of RO process and RO recovery depending on GH salt rejection, and (2) energy consumption of electric based GH process can be calculated from the simulation. As a result, energy consumption of GH-RO hybrid system and conventional seawater RO process (with/without enregy recovery device) is compared. Since the energy consumption of GH process is too high, other solution used seawater heat and heat exchanger instead of electric energy is suggested.