• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.703-707
• /
• 2001

A performance analysis of a SOFC/MGT hybrid system has been carried out for concept design. Thermo-dynamic models for each component being able to describe electrochemical characteristics and heat and mate-rial balance are proposed. Estimated is the power capacity of a SOFC suitable for the hybrid operation with a 5kW class MGT. Effects of current density and operating pressure are also investigated. Electric efficiency showed weak dependence on operating pressure and current density. It is desirable that the SOFC operates at high current density in manufacturing cost's point of view though operating with high current density slightly decreases the electric efficiency find specific power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1806-1813
• /
• 2012

This paper proposes a modeling method for hybrid generation system with wind turbine and diesel generator applicable in island area. For modeling objects, squirrel-cage induction generator is considered as wind turbine generator and synchronous generator as diesel generator. Parameters and controllers related to them are established and modeled through analysis of traditional small capacity class. The simulation results for practical size hybrid generation system were suggested.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.53-66
• /
• 2016

New non-hybrid approaches to improve energy efficiency of construction machineries are reviewed in this paper. Hydraulic systems are classified into four classes according to Backe's classification and commercially promising new technologies are carefully chosen in each class. IMV, 3-Line CPR, Closed Circuit Displacement Control of Differential Cylinder, and Throttle-less Secondary Control are chosen as representative non-hybrid new technologies. Key principle of each technology is explained and representative references which run through each technology are selected. Advantages and weaknesses of each technology are discussed and compared from the view point of construction machinery manufacturers.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.4
• /
• pp.1-8
• /
• 2009

Nowadays with the high fuel prices, the demands for energy saving and green emission of construction machinery have highly been increased without sacrifice of working performance, safety and reliability. The aim of this paper is to propose a new energy saving hybrid excavator system using an electro-hydraulic actuator driven by an electric motor/generator for the regeneration of potential energy. A 5 ton class excavator is analyzed, developed with the boom for the evaluation of the designed system. The hardware implementation is also presented in this paper. A control strategy for the hybrid excavator is proposed to operate the machine with a highest efficiency. The energy saving ability of the proposed excavator is clearly verified through simulation and experimental results in comparison with a conventional hydraulic excavator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.303-309
• /
• 2019

A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.141-152
• /
• 2013

The current web implementation largely falls into process-oriented and object-oriented methods. Both ways implement the programs to be used for simple design of external outfit and auxiliary function of hybrid webs and it might lead to cost problems arising from waste of time and man-power to develop with it. Therefore, managed structural system programming which can be applied under .NET framework is suggested in a bid to solve these problems. The structural system design method under .NET environment by applying CS concept prefers to adopting the optimized design configuration suited to proper interfaces of UI configuration, which offers the environment to maintain the inheritance relationship by taking form of the balanced class allotment by domain, and continue to keep the connectivity between UX and UI which leads to application of interface of UX objects as form of objects through connection with objects in class design process. This development method enables programs to be implemented focused on representation methods of UI and UX, and helps relieve much of the burden on development costs.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.569-587
• /
• 2010

In the field of fashion in this modern era, the tendency of diversification has created a variety of hybrid patterns and this tendency is being accelerated simultaneously by the hybrid trend. This research aims to analyze the aesthetic features of hybrid fashion in the modern "Sports Inspired Fashion(SIF)." We analyze fashion in the past 10 years from 2001 S/S to 2010 S/S. We focus on the four largest worldwide collections from New York, Paris, Milano, and London and concentrate on analyzing the contents from 38 volumes of Gap Press magazine. To accomplish our goal of study, we first define the concept of sports-inspired fashion and propose a framework of analysis to study hybrid patterns by reviewing the previous studies on hybrid patterns. Second, we analyze a wide range of sports-inspired fashion examples that have appeared in Gap Press magazines for the past 10 years(those which have been inspired by sports uniforms and training wears). Third, we analyze and classify the hybrid patterns of sports-inspired fashion. The results of our research are as follows. We have collected a total of 534 SIF works from the whole set of 61359 pictures and examined 23 sports fields. In terms of seasonal changes, the SIF works were found the most in the spring collections. Then, we have identified 25 hybrid patterns. The time hybrid pattern comprises more than half of the data(58.2%). The class-culture hybrid patterns comprise 18.8%, while the gender hybrid patterns comprise 18.2%. However, the intercultural hybrid patterns were rarely found, comprising merely 5% of the data. Our analysis confirms that sports and sports wear fashion are changing and developing in truly diverse ways in this modern era. This trend has continued to influence the high fashion in the modern age and is expected to exert a continuous impact on the change of fashion in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.113-121
• /
• 2005

In this paper, we design the hybrid learning algorithm of LVQ which is to perform EMG pattern recognition. The proposed hybrid LVQ learning algorithm is the modified Counter Propagation Networks(C.p Net. ) which is use SOM to learn initial reference vectors and out-star learning algorithm to determine the class of the output neurons of LVa. The weights of the proposed C.p. Net. which is between input layer and subclass layer can be learned to determine initial reference vectors by using SOM algorithm and to learn reference vectors by using LVd algorithm, and pattern vectors is classified into subclasses by neurons which is being in the subclass layer, and the weights which is between subclass layer and class layer of C.p. Net. is learned to classify the classified subclass. which is enclosed a class . To classify the pattern vectors of EMG. the proposed algorithm is simulated with ones of the conventional LVQ, and it was a confirmation that the proposed learning method is more successful classification than the conventional LVQ.

• The Journal of Korean Association of Computer Education
• /
• v.6 no.1
• /
• pp.109-120
• /
• 2003

Recently, as more web-based applications are widely used, various methods for education are developed in practical areas. As a result, in many organizations, virtual educations such as WBI learning. CAI, and distance learning are offered actively. With the advantages of web-based education, in order to achieve feasible and efficient effects on education. a new web-based instruction model that considers the abilities, the interests, and the aptitudes of students individually is required. In this paper, a new web-based instruction model, called a hybrid model, is proposed and implemented. And then, two model - the stepwise model and the hybrid model- are applied to a computer accounting class of a vocational high school. Students attend the web-based class in a computer center for 100 minutes autonomously. After the classes, a questionnaire is made in order to analyze both the effect on that class and the learning fulfillment of the proposed instruction model.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.20-29
• /
• 2006

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occulusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second permolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of $45^{\circ}$ with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.