• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.3
• /
• pp.288-293
• /
• 2009

This study presents the active noise control of duct noise. The duct was excited by a steady-state harmonic and white noise force and the control was performed by one control speaker attached to surface of the duct. An adaptive controller based on filtered x LMS(FXLMS) algorithm was used and controller was defined by minimizing the square of the response of the error microphone. The assemble controller, which is called a hybrid ANC(active noise control) system, was combined with feedforward and feedback controller. The feedforward ANC attenuates primary noise that is correlated with the reference signal, while the feedback ANC cancels the narrowband components of the primary noise that are not observed by the reference sensor. Furthermore, in many ANC applications, the periodic components of noise are the most intense and the feedback ANC system has the effect of reducing the spectral peaks of the primary noise, thus easing the burden of the feedforward ANC filter.

• Journal of KIISE:Information Networking
• /
• v.28 no.1
• /
• pp.173-181
• /
• 2001

최근 인터넷 사용자의 증가와 서비스의 다양화 그리고 이에 따른 고속 인터넷 엑세스 기술의 도입으로 인터넷 트래픽의 급격한 증가를 초래하고 있다. 이러한 이유로 인터넷 패킷 전달에 2계층 스위칭 기술과 3계층 라우팅 기술을 접목한 IP/ATM Hybrid system이 등장하게 되었다. 이러한 시스템에서의 중요한 자원은 2계층 스위칭 기술을 사용하기 위한 유한한 VCI/VPI 공간이다. 이 VCI/VPI 공간을 효과적으로 관리하기 위한 방안으로 많은 방안들이 제시되고 있다. 특히 흐름 기반의 IP/ATM Hybrid system에서의 흐름 분류기를 사용함으로서 VCI/CPI 공간을 관리하고 있다. 본 논문에서 주장하는 적응형X/Y 분류기가 유한한 VCI/VPI 공간을 효율적으로 관리하기 위한 방안임을 제시하고 이에 대하여 실험을 통하여 성능 평가를 실시하였다 특히 동일한 VCI/VPI 공간에서 X/Y분류기와의 비교실험에서 적응형 X/Y 분류기의 성능이 높은 스위칭 율로 나타나고 있다. 즉 적응형 X/Y 분류기가 X/Y분류기에 비하여 효율적으로 VCI/VPI를 관리함을 보이고 있다

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.357-363
• /
• 2021

Eco-friendly hybrid railroad propulsion system with fuel-cell and battery was suggested to reduce carbon dioxide gas and replace retired diesel railroads. Lithium-ion battery with high energy/power density and long lifetime is selected as the energy source at the battery side due to its excellent performance. However, the performance of lithium-ion batteries was affected by temperature, current rate, and operating condition. Temperature is known to be the most influential factor in changing battery parameters. In addition, appropriate thermal management is required to ensure the safe and effective operation of lithium-ion battery. Electro-thermal coupled model with varying parameter depends on temperature, and state-of-charge (SOC) is suggested to estimate battery temperature. The electric-thermal coupled model contains diffusion current using parameter identification by adaptive control algorithm when considering thermal diffusion effect. An experiment under forced convection was conducted using cylindrical cell and 18 parallel-connected battery module to demonstrate the method.

• Smart Structures and Systems
• /
• v.29 no.3
• /
• pp.433-444
• /
• 2022

Concrete is a most utilized material in the construction industry that have main components. The strength of concrete can be improved by adding some admixtures. Evaluating the impact of fly ash (FA) and silica fume (SF) on the long-term compressive strength (CS) of concrete provokes to find the significant parameters in predicting the CS, which could be useful in the practical works and would be extensible in the future analysis. In this study, to evaluate the effective parameters in predicting the CS of concrete containing admixtures in the long-term and present a fitted equation, the multivariate adaptive regression splines (MARS) method has been used, which could find a relationship between independent and dependent variables. Next, for optimizing the output equation, biogeography-based optimization (BBO), particle swarm optimization (PSO), and hybrid PSOBBO methods have been utilized to find the most optimal conclusions. It could be concluded that for CS predictions in the long-term, all proposed models have the coefficient of determination (R²) larger than 0.9243. Furthermore, MARS-PSOBBO could be offered as the best model to predict CS between three hybrid algorithms accurately.

• Journal of the Korea Computer Graphics Society
• /
• v.19 no.3
• /
• pp.1-11
• /
• 2013

Fluid Implicit Particle (FLIP) method is used in Visual Effect(VFX) industries frequently because FLIP based simulation show high performance with good visual quality. However in large-scale fluid simulations, the efficiency of FLIP method is low because it requires many particles to represent large volume of water. In this papers, we propose a novel hybrid method of simulating fluids to supplement this drawback. To improve the performance of the FLIP method by reducing the number of particles, particles are deployed inside thin layers of the inner surface of water volume only. The coupling between less-disspative solutions of FLIP method and viscosity solution of level set method is achieved by introducing a new surface reconstruction method motivated by surface reconstruction method[1] and moving least squares(MLS) method[2]. Our hybrid method can generate high quality of water simulations efficiently with various multiscale features.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1459-1466
• /
• 2013

Recently, various types of three-dimensional cameras have been used to analyze surrounding environments. In this paper, we suggest a mechanism of adaptively switching active and passive cameras of hybrid cameras, which can extract 3D image information more accurately. The suggested method first obtains brightness and texture features representing the environment from input images. It then adaptively selects active and passive cameras by generating rules that reflect the extracted features. In experimental results, we show that a hybrid 3D camera consisting of passive and active cameras is set up and the proposed method can effectively choose appropriate cameras in the hybrid camera and make it possible to extract three dimensional information more accurately.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.233-236
• /
• 2001

In this paper, we propose a TSK-type fuzzy classifier using PCA(Principal Component Analysis), FCM(Fuzzy C-Means) clustering and hybrid GA(genetic algorithm). First, input data is transformed to reduce correlation among the data components by PCA. FCM clustering is applied to obtain a initial TSK-type fuzzy classifier. Parameter identification is performed by AGA(Adaptive Genetic Algorithm) and RLSE(Recursive Least Square Estimate). we applied the proposed method to Iris data classification problems and obtained a better performance than previous works.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.217-218
• /
• 2013

본 논문에서는 기존의 하이브리드 MIMO 기법들이 정수 배의 멀티플렉싱 이득만 달성할 수 있는 단점을 해결하기 위해서 임의의 멀티플렉싱 이득을 달성할 수 있는 하이브리드 MIMO 기법을 제안한다. 제안된 기법은 다양한 멀티플렉싱 이득을 달성하기 위해서 전송 matrix 의 구성을 기존의 MIMO 기법들과 다르게 구성함으로써 멀티플렉싱 이득의 조절이 가능하다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.565-568
• /
• 2003

본 연구에서는 고정점 알고리즘과 원 신호의 시간적 상관성을 적응조정한 견실 알고리즘의 조합형 독립성분분석을 제안하였다. 여기서 고정점 알고리즘은 뉴우턴법의 경신규칙에 따른 빠른 분석속도와 견실 알고리즘은 시간적 상관성과 낮은 kurtosis를 가지는 영상의 효과적인 분리를 얻기 위함이다. 제안된 알고리즘의 독립성분분석을 512$\times$512 픽셀의 10개 영상으로부터 임의의 혼합행렬에 따라 발생되는 혼합영상의 분리에 적용한 결과, 기존의 고정점 알고리즘의 독립성분분석보다 우수한 분리성능과 빠른 분리속도가 있음을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1E
• /
• pp.16-22
• /
• 2009

In this paper, the new robust active noise controller was proposed to be applied for attenuating the noises when the nonlinear distortion in the secondary path exists. Through computer simulations as well as the analytical analysis, it could be shown that it is possible for both conventional LMS controller and proposed controller, to be applied for actively controlling the noises and linearizing the nonlinear distortion in the secondary path. Also, the simulations results demonstrated that the proposed controller may have faster convergence speed and better capability of controlling the noises and compensating the nonlinear distortion than the conventional LMS controller.