• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.61-70
• /
• 2005

본 논문에서는 "middle-down" 접근법에 기반한 기존의 표준 셀 배치기인 하이브리드 배치기$^{[25]}$의 단점을 보완한 효율적인 광역배치 알고리즘을 제안한다. hMETIS(클러스터링을 이용한 다단계 하이퍼그래프 분할기법)에 사용된 기법과 RBLS(Relaxation Based Local Search) 기법의 적절한 조합을 통해 기존 하이브리드 배치기의 광역배치 기능을 향상시킨다. hMETIS를 통한 분할기법을 "top-down" 방식으로 적용하고, 각 단계에서 RBLS를 사용하여 광역배치를 점진적으로 개선해 나가는 제안된 기법은 초기 배치에 크게 영향을 받는 기존 방법의 문제점을 해결하고, 실행 속도를 개선하면서도 배치의 질을 떨어뜨리지 않는 효과적인 기법이다. 제안한 알고리즘을 통해 구현된 개선된 배치기는 기존의 하이브리드 배치기나 FengShui와 같은 우수한 툴과 비교할 때 뒤지지 않는 성능을 보인다. 특별히 기존의 하이브리드 배치기에 비해 실행 속도 면에서 평균 5배 정도의 개선을 보였고, 큰 회로에 대해선 배선길이도 줄어드는 향상된 결과를 보였다.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.997-1004
• /
• 2011

A fault detection algorithm of a charge and discharge system to ensure the safe use of hybrid electric vehicle is proposed in this paper. This algorithm can be used as a complementary way to existing fault detection technique for a charge and discharge system. The proposed algorithm uses a SVDD technique, which additionally utilizes two methods for learning a large amount of data; one is to incrementally learn a large amount of data, the other one is to remove the data that does not affect the next learning using a new data reduction technique. Removal of data is selected by using lines connecting support vectors. In the proposed method, the data processing speed is drastically improved and the storage space used is remarkably reduced than the conventional methods using the SVDD technique only. A battery data and speed data of a commercial hybrid electrical vehicle are utilized in this study. A fault boundary is produced via SVDD techniques using the input and output in normal operation of the system without using mathematical modeling. A fault detection simulation is performed using both an artificial fault data and the obtained fault boundary via SVDD techniques. In the fault detection simulation, fault detection time via proposed algorithm is compared with that of the peak-peak method. Also the proposed algorithm is revealed to detect fault in the region where conventional peak-peak method is never able to do.

• 비파괴검사학회지
• /
• 제28권1호
• /
• pp.46-53
• /
• 2008

복합재료의 내부 결함 평가를 위해 일반적으로 적용되어온 초음파 C-스캔 기법은 섬유자동 배열을 통한 정밀 성형 공정에 적용하기에는 많은 어려움이 있다. 따라서 본 연구는 복합재료의 정밀 성형 공정 중에 발생되는 각종 내부 결함들을 비파괴적, 비접촉으로 평가하기 위한 새로운 하이브리드 초음파 평가 기법을 확립하는데 목적이 있다. 이를 위하여 본 연구에서는 초음파 산란 반사(scattering reflection) 방식을 토대로 한 새로운 이중 피치-캐치(dual pitch-catch) 기법을 확립하여 기존의 결함평가를 위해 시험편의 스캔에 소요되는 시간을 줄이면서 우수한 결함 영상을 얻을 수 있는 새로운 하이브리드 기법을 개발하였다. 즉 두 가지 종류의 열경화성 및 열가소성 복합재료(carbon/epoxy, carbon/PPS) 적층판의 내부 박리(delamination) 결함의 영상화를 위하여 레이저를 이용한 유도 초음파의 발생 및 이중 피치-캐치(pitch-catch)방식을 토대로 한 비접촉식 공기 정합 트랜스듀서(air-coupled transducer)를 이용하여 결함 영상을 얻기 위한 핵심 알고리즘을 확립하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권12호
• /
• pp.1672-1683
• /
• 2004

추천 시스템은 일상의 정보를 필터링 해주는 웹 지능화 기술 중의 하나이다. 현재까지 협력기반 (사회기반) 추천 시스템, 내용기반 추천시스템과 이들의 장점을 혼합한 추천시스템들이 개발되어 왔다. 본 논문에서는 클러스터링 기법을 항목기반 협력필터링 틀에 적용한 일명 ICHM이라 불리는 새로운 형태의 혼합 추천 시스템을 소개한다. 이 방법은 항목의 내용 정보를 협력필터링 틀 안에 통합시킴으로써 평가 데이타의 희박성을 줄일 수 있을 뿐만 아니라 새로운 항목 추천 시 발생하는 문제점을 해결할 수 있다. ICHM 방법의 특성 및 성능을 평가하기 위하여 MovieLense 데이타를 이용한 다양한 실험을 하였다. 실험 결과, ICHM 방법이 항목기반 협력 필터링의 예측 질을 향상시킬 뿐만 아니라 새로운 항목 추천 시에도 아주 유용함을 확인할 수 있었다.

• 복식
• /
• 제60권1호
• /
• pp.91-100
• /
• 2010

In the rapid development of science, technology, information, cultural industry during the 21st century, hybridity is consistently shown in which different techniques, systems, and sorts in society, industry, culture, and art are combined. The purpose of this study is to analyze the formative characteristics of hybrid make-up that is shown in the field of make-up as a practical art reflecting society and culture of a specific period, to understand the tendencies of modern make-up, and to present data for predicting changes in the future. According to the results of this study, the hybrid characteristics of make-up indicate as follows. First, hybrid make-up at a timely aspect in which senses transcending times by mixed expression of traditional classicism and modernism coexist and mingled, Characteristics of hybrid make-up at a local aspect are shown in one make-up by expressing modern tendencies that break from homogeneity, uniformity, and concentration as interests in other cultures and borrowing them in modern images. Also in modern period, characteristics of hybrid make-up at a cultural aspect are shown by mixed expression of conflicting cultural factors such as modern beauty of cutting-edge technology, female & male, and elegance & activeness in one makeup. Within the multiplex, modern social system in this period of cutting-edge technology, "tendency of hybrid design" as a social, cultural phenomenon is shown to be a complex, new designing tendency due to mixture and deconstruction of various genres. Hybrid make-up, seeking diversification and open-mindedness, is predicted to be consistently developed owing to infinite materials of design, being expected to be stronger and newer in the future.

• Journal of Korean Neurosurgical Society
• /
• 제62권1호
• /
• pp.35-45
• /
• 2019

Objective : To describe our experiences with a fully equipped high-end digital subtraction angiography (DSA) system within a hybrid operating room (OR). Methods : A single-plane DSA system with 3-dimensional rotational angiography, cone-beam computed tomography (CBCT), and real-time navigation software was used in our hybrid OR. Between April 2014 and January 2018, 191 sessions of cerebrovascular procedures were performed in our hybrid OR. After the retrospective review of all cases, the procedures were categorized into three subcategorical procedures : combined endovascular and surgical procedure, complementary rescue procedure during intervention and surgery, and frameless stereotaxic operation. Results : Forty-nine of 191 procedures were performed using hybrid techniques. Four cases of blood blister aneurysms and a ruptured posterior inferior cerebellar artery aneurysm were treated using bypass surgery and endovascular trapping. Eight cases of ruptured aneurysm with intracranial hemorrhage (ICH) were treated by partial embolization and surgical clipping. Six cases of ruptured arteriovenous malformation with ICH were treated by Onyx embolization of nidus and subsequent surgical removal of nidus and ICH. Two (5.4%) of the 37 cases of pre-mature rupture during clipping were secured by endovascular coil embolization. In one (0.8%) complicated case of 103 intra-arterial thrombectomy procedures, emergency surgical embolectomy with bypass surgery was performed. In 27 cases of ICH, frameless stereotaxic hematoma aspiration was performed using $XperGuide^{(R)}$ system (Philips Medical Systems, Best, the Netherlands). All procedures were performed in single sessions without any procedural complications. Conclusion : Hybrid OR with a fully equipped DSA system could provide precise and safe treatment strategies for cerebrovascular diseases. Especially, we could suggest a strategy to cope flexibly in complex lesions or unexpected situations in hybrid OR. CBCT with real-time navigation software could augment the usefulness of hybrid OR.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.225-228
• /
• 2012

In order to synthesize LED phosphor materials, we have applied three novel synthesis techniques, "melt synthesis", "fluidized bed synthesis" and "vapor-solid hybrid synthesis", in contrast with the conventional solid state reaction technique. These synthesis techniques are also a general and powerful tool for rapid screening and improvements of new phosphor materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.236-239
• /
• 1988

Prediction errors generated by motion compensated coding are coded with transform coding techniques as DCT. The performance of transform coding techniques are lowered mainly due to the source characteristics with a great deal of zero populations and plus-minus sign changes, i.e., low correlation. In this paper a transform coding scheme which adopts a decomposition of prediciton errors into two sources is proposed and compared its performance with conventional scheme.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.631-642
• /
• 2017

Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.723-736
• /
• 2014

Glass Fiber Reinforced Plastic (GFRP) structures are primarily manufactured using hand lay-up or vacuum infusion techniques, which are cost-effective for the construction of marine vessels. This paper aims to investigate the mechanical properties and failure mechanisms of the hybrid GFRP composites, formed by applying the hand lay-up processed exterior and the vacuum infusion processed interior layups, providing benefits for structural performance and ease of manufacturing. The hybrid GFRP composites contain one, two, and three vacuum infusion processed layer sets with consistent sets of hand lay-up processed layers. Mechanical properties assessed in this study include tensile, compressive and in-plane shear properties. Hybrid composites with three sets of vacuum infusion layers showed the highest tensile mechanical properties while those with two sets had the highest mechanical properties in compression. The batch homogeneity, for the GFRP fabrication processes, is evaluated using the experimentally obtained mechanical properties.