• Title/Summary/Keyword: Hybrid Receiver

Search Result 132, Processing Time 0.024 seconds

Fabrication and Characterization of PIN-Preamplifier Module for High Speed Optical Receiver (고속 광통신용 PIN-전치증폭기 수광모듈 제작 및 특성 측정)

  • 윤태열;박경현;송민규;황인덕;윤태열;유지범;정종민
    • Korean Journal of Optics and Photonics
    • /
    • v.5 no.2
    • /
    • pp.333-339
    • /
    • 1994
  • We fabricated a single mode fiber pigtailed PIN-preamplifier front-end receiver module for the high speed optical receiver. Hybrid method was used to integrate GaInAs PIN photodiode and transimpedance type GaAs preamplifier. The capacitance and the diameter of light receiving area of PIN photodiode were 0.35 pF and $20{\mu}m$ respectively. The -3 dB cut-off frequency of PIN-preamplifier module was above 2 GHz, and the sensitivity of the module at 2.5 Gbps NRZ $(PRBS=2^{23}-1)$ signal was -25.2 dBm at $10^{-9}$ BER. > BER.

  • PDF

Robust speech quality enhancement method against background noise and packet loss at voice-over-IP receiver (배경잡음 및 패킷손실에 강인한 voice-over-IP 수신단 기반 음질향상 기법)

  • Kim, Gee Yeun;Kim, Hyoung-Gook
    • The Journal of the Acoustical Society of Korea
    • /
    • v.37 no.6
    • /
    • pp.512-517
    • /
    • 2018
  • Improving voice quality is a major concern in telecommunications. In this paper, we propose a robust speech quality enhancement against background noise and packet loss at VoIP (Voice-over-IP) receiver. The proposed method combines network jitter estimation based on hybrid Markov chain, adaptive playout scheduling using the estimated jitter, and speech enhancement based on restoration of amplitude and phase to enhance the quality of the speech signal arriving at the VoIP receiver over IP network. The experimental results show that the proposed method removes the background noise added to the speech signal before encoding at the sender side and provides the enhanced speech quality in an unstable network environment.

Information Systems in Interdisciplinary Research: Analytic and Holistic Ways to Access Information Science Knowledge

  • Engerer, Volkmar P.
    • Journal of Information Science Theory and Practice
    • /
    • v.7 no.2
    • /
    • pp.6-22
    • /
    • 2019
  • The paper explores how information science knowledge can be used systematically in digital, interdisciplinary research settings and gives a conceptual analysis of the relationship between information science knowledge as donor and other research as receiver in an interdisciplinary project environment. The validity of the approach is demonstrated by the author's work on the project "The Primacy of Tense: A. N. Prior Now and Then." The study proposes a hybrid approach, combining analysis and synthesis. The analytical component identifies information systems, assigns an information system type to them, and accesses the information science knowledge associated with that type. The synthetic part focuses on the connections between information systems according to the receiver discipline's practices. The paper makes explicit the actions of experienced information professionals, thereby making their expertise accessible to others. The analytical and synthetic strategies are explained by linking them to two modes of researchers in the receiver discipline, how they act as researchers and what they know about it. The paper offers information professionals concrete assistance with identification of the appropriate strategy for accessing professional knowledge and taking appropriate actions and development decisions.

Throughput Performance of Hybrid ARQ Ultra-Wideband Communication System for Wireless Packet Transmission (무선 패킷 전송을 위한 Hybrid ARQ 광대역 통신시스템의 처리율 성능)

  • Roh, Jae-Sung
    • Journal of Advanced Navigation Technology
    • /
    • v.11 no.3
    • /
    • pp.274-280
    • /
    • 2007
  • An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.

  • PDF

Design and Performance Analysis of Hybrid Receiver based on System Level Simulation in Backhaul System (백홀 시스템에서 시스템 레벨 시뮬레이션 기반 하이브리드 수신기 설계 및 성능 분석)

  • Moon, Sangmi;Chu, Myeonghun;Kim, Hanjong;Kim, Daejin;Hwang, Intae
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.11
    • /
    • pp.3-11
    • /
    • 2015
  • An advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the advanced receiver based on soft decision to reduce the interference from neighbor cell in LTE-Advanced downlink system. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced downlink system. Simulation results show that the proposed receiver can improve SINR, throughput, and spectral efficiency of conventional system.

a Study on the Hybrid Interference Canceller for MAI Cancellation (다중접속간섭 제거를 위한 혼합형 간섭제거기에 관한 연구)

  • Kim, Jae-Hong;Park, Yong-Wan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.4
    • /
    • pp.9-16
    • /
    • 2000
  • This paper shows the performance of a multiuser detection DS-CDMA receiver based on of the hybrid scheme of parallel interference cancellation (PIC) and successive interference cancellation (SIC). The proposed hybrid interference cancellation is presented and is compared with existing PIC, SIC and Hybrid It of other type schemes. The performance criteria used for comparison are complexity, delay and average bit error rate (BER) performance obtained by simulation in Rayleigh-fading channel (Jake's model) with additive white Gaussian noise (AWGN). In the proposed hybrid IC, the BER performance approximates the one of SIC and the delay is half of the SIC. And the number of cancellation of the hybrid It is reduced about a fourth.

  • PDF

Hybrid SNR-Adaptive Multiuser Detectors for SDMA-OFDM Systems

  • Yesilyurt, Ugur;Ertug, Ozgur
    • ETRI Journal
    • /
    • v.40 no.2
    • /
    • pp.218-226
    • /
    • 2018
  • Multiuser detection (MUD) and channel estimation techniques in space-division multiple-access aided orthogonal frequency-division multiplexing systems recently has received intensive interest in receiver design technologies. The maximum likelihood (ML) MUD that provides optimal performance has the cost of a dramatically increased computational complexity. The minimum mean-squared error (MMSE) MUD exhibits poor performance, although it achieves lower computational complexity. With almost the same complexity, an MMSE with successive interference cancellation (SIC) scheme achieves a better bit error rate performance than a linear MMSE multiuser detector. In this paper, hybrid ML-MMSE with SIC adaptive multiuser detection based on the joint channel estimation method is suggested for signal detection. The simulation results show that the proposed method achieves good performance close to the optimal ML performance at low SNR values and a low computational complexity at high SNR values.

A Study on the Modified Hybrid ARQ System (수정된 하이브리드 ARQ시스템 연구)

  • 김신령;최연석;강창언
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.15 no.4
    • /
    • pp.324-330
    • /
    • 1990
  • In this paper, the hybrid ARQ system involving the single error correcting and double error detection (127, 119) cyclic Hamming codes and the SR(selective repeat) ARQ schemes with a finite receiver buffer has been designed and constructed. The system performance has been analyzed and simulated. As a result of the simulation, it has been shown that the transmitter retransmitted those data blocks that were detected in errors especially the request signal errors using two retransmission. The system performance was measured by throughput efficiency due to channel error effects.

  • PDF

Multi-Tag Beamforming Scheme Based on Backscatter Communication for RF Energy Harvesting Networks (RF 에너지 하베스팅 네트워크를 위한 Backscatter 통신 기반의 다중 태그 빔포밍 기법)

  • Hong, Seung Gwan;Hwang, Yu Min;Lee, Sun Yui;Kim, Jin Young
    • Journal of Satellite, Information and Communications
    • /
    • v.11 no.2
    • /
    • pp.60-64
    • /
    • 2016
  • In this paper, we propose a scheme for MIMO beamforming for the backscatter communication using a multi-tag to improve the efficiency of energy harvesting and the BER of received signals. We obtain a normal channel information through a communication between the H-AP and multi-tag. The H-AP sets parameters for the transmission scenario of the spatial channel model (SCM) using the obtained channel information and generates a SCM channel information. Then, the H-AP transmits signals that have optimal transmission power to increase the signal-to-interference-plus-noise ratio (SINR) to each of tags. Tags perform a backscatter communication with signals. The receiver performs a time switching technique of energy harvesting using backscatter signals from the multi-tag. Simulation results demonstrate effectiveness of the proposed scheme, and the harvesting efficiency and BER at the receiver is greatly improved.

Cost Effective Silica-Based 100 G DP-QPSK Coherent Receiver

  • Lee, Seo-Young;Han, Young-Tak;Kim, Jong-Hoi;Joung, Hyun-Do;Choe, Joong-Seon;Youn, Chun-Ju;Ko, Young-Ho;Kwon, Yong-Hwan
    • ETRI Journal
    • /
    • v.38 no.5
    • /
    • pp.981-987
    • /
    • 2016
  • We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.