• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.108-115
• /
• 2018

In bone tissue engineering, polycaprolactone (PCL) is one of the most widely used biomaterials to manufacture scaffolds as a synthetic polymer with biodegradability and biocompatibility. The polymer deposition system (PDS) with four axis heads, which can dispense bio-polymers, has been used in scaffold fabrication for tissue engineering applications. A dual-head deposition technology of PDS is an effective technique to fabricate 3D scaffolds. The electrospinning technology has been widely used to fabricate porous and highly interconnected polymer fibers. Thus, PDS can fabricate nanofiber-combined hybrid scaffolds using fused deposition modeling (FDM) and electrospinning methods. This study aims to fabricate nanofiber-combined scaffolds with uniform nanofibers using PDS. The PCL nanofibers were fabricated and evaluated according to the fabrication process parameters. PCL nanofibers were successfully fabricated when the applied voltage, tip-to-collector distance, flow rate, and solution concentration were 5 kV, 1 cm, 0.1 ml/h, and 8 wt%, respectively. The cell proliferation was evaluated according to the electrospinning time. Scanning electron microscopy was used to acquire images of the cross-sectioned hybrid scaffolds. The cell proliferation test of the PCL and nanofiber-combined hybrid scaffolds was performed using a CCK-8 assay according to the electrospinning time. The result of in-vitro cell proliferation using osteosarcoma MG-63 cells shows that the hybrid scaffold has good potential for bone regeneration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.258-268
• /
• 2012

Wireless Sensor Network(WSN) is constituted by low-cost and low-energy, So the most important issue is that the task of the sensor performs successfully by using less energy. In previous WSN, determination of the header and gathering sensor data solution by header give great affection to the performance of network. In this paper, we propose a Hybrid transmission method which considers the direction of data collections. In the proposed hybrid routing method, all of the sensors determine that transmission the data to the sink node directly or indirectly using the head node depend on the location of the head node in the cluster. The performance is compared with the LEACH(Low Energy Adaptive Clustering Hierarchy) by experimental analysis. The results show that the preposed method can reduce the communication distance and energy consumption by avoiding the detour direction of transmission of the data.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.569-576
• /
• 2022

In this study, the healing performance of hybrid self-healing concrete was investigated by mixing bacterial pellets(BP) and solid phase capsules(SC), respectively, based on organic-inorganic self-healing material(MC). Constant water head permeability test was applied as a method of evaluating the healing performance, and the healing rate and the healed crack width calculated by the equivalent crack width were used as evaluation indicies. As a result of the water permeability test, when the initial crack width was 0.3 mm, the healing rates of MC-BP and MC-SC were 2.1~3.0 %pt higher than that of MC, and the healed crack width of hybrid concrete increased by 0.017~0.018 mm. In conclusion, it was found that the self-healing performance was not significantly improved even if the two types of healing materials are used together.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2140-2156
• /
• 2023

The Wireless Sensor Network (WSN), is constructed out of teeny-tiny sensor nodes that are very low-cost, have a low impact on the environment in terms of the amount of power they consume, and are able to successfully transmit data to the base station. The primary challenges that are presented by WSN are those that are posed by the distance between nodes, the amount of energy that is consumed, and the delay in time. The sensor node's source of power supply is a battery, and this particular battery is not capable of being recharged. In this scenario, the amount of energy that is consumed rises in direct proportion to the distance that separates the nodes. Here, we present a Hybrid Firefly Glow-Worm Swarm Optimization (HF-GSO) guided routing strategy for preserving WSNs' low power footprint. An efficient fitness function based on firefly optimization is used to select the Cluster Head (CH) in this procedure. It aids in minimising power consumption and the occurrence of dead sensor nodes. After a cluster head (CH) has been chosen, the Glow-Worm Swarm Optimization (GSO) algorithm is used to figure out the best path for sending data to the sink node. Power consumption, throughput, packet delivery ratio, and network lifetime are just some of the metrics measured and compared between the proposed method and methods that are conceptually similar to those already in use. Simulation results showed that the proposed method significantly reduced energy consumption compared to the state-of-the-art methods, while simultaneously increasing the number of functioning sensor nodes by 2.4%. Proposed method produces superior outcomes compared to alternative optimization-based methods.

• Physical Therapy Korea
• /
• v.31 no.1
• /
• pp.8-17
• /
• 2024

Background: Sleep accounts for approximately one-third of a person's lifetime. It is a relaxing activity that relieves mental and physical fatigue. Pillows of different sizes, shapes, and materials have been designed to improve sleep quality by achieving an optimal sleep posture. Objects: This study aimed to determine which pillow provides the most comfortable and supports the head and neck during sleep, which may enhance sleep quality. Methods: Twenty-eight healthy adults (19 males and 9 females) with an average age of 29 years participated in this cross-sectional study. This experiment was conducted while the participants laid down for 5 minutes in four different pillow conditions: (1) no pillow (NP), (2) neck support foam pillow (NSFP), (3) standard microfiber filled pillow (SFP), and (4) hybrid foam pillow (HFP). The head-neck peak pressure, cranio-vertebral angle in supine (CVAs), cranio-horizontal angle in supine (CHAs), chin-sternum distance (CSD), and muscle tone of sternocleidomastoid were analyzed using one-way repeated measures analysis of variance (ANOVA). The significance level was set at p < 0.05. Results: The head-neck peak pressure was the highest in the NSFP condition, followed by the NP, SFP, and HFP conditions. The CVAs, CHAs, and CSD of the SFP were lower than those of the other pillows. Muscle tone was the highest in the NP condition, followed by the of NSFP, HFP, and SFP conditions. The participants subjective comfort level in both the supine and side-lying postures was highest in the HFP condition, followed by the SFP and NSFP conditions. Conclusion: This study can be used to establish the importance of pillow selection for high-quality sleep. The results of this study, suggest that a hybrid pillow with a good supportive core and appropriate fluffiness can maintain comfort and correct cervical spine alignment during sleep.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.216-218
• /
• 2006

The application of aluminium alloy is increasing for lightweight and high quality transport vehicle. In this study, therefore, it is intended to apply the high speed hybrid welding method for marine grade aluminium alloy(A5083) used for shipbuilding that consists of 3 kW CW Nd:YAG laser and MIG welding process. For this purpose, the characteristics of process parameters(laser & arc combine angle and focal position of hybrid head to specimen) are investigated for hybrid fillet joint. This study also describes determination of heat distribution using finite element model of the T-joint fillet weld using the in-house solver which has been validated for different type of welding problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2010

In recent years, a large number of study for rear impact has been conducted and as a result of study, researchers proposed the neck injury criteria and test procedures. But many questions, related to injury criteria and dummy biomechanical levels, remain unresolved. In recently reports, rear impact motions of BioRIDIIg is not humanlike but better than other dummy(HybridIII, RID3d). So, in this paper, 4 times sled test would be done to find the substitutable neck injury criteria in BioRIDIIg. To review corelation trend with neck injury critera and head-neck movement, we compared with recently announced neck injury criteria(NIC, Nkm, T1 ect.) and head-neck X-direction movement in BioRIDIIg. Finally, we find the head-neck X-direction movement on head C.G to T1 point may be considerable as the additional neck injury criteria.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.169-175
• /
• 2002

World demand for natural gas has generated the need for many new land transmission pipelines to be installed in the next decade or so. Although mechanized gas metal arc welding is well developed, there are opportunities for cost savings by using alternative welding processes. Hybrid Nd:YAG laser - gas metal arc welding enables fibre optic delivery of the laser energy to a robotic welding head to be combined with the addition of extra energy and a consumable to produce good quality, deep penetration welds in a single pass. The present paper describes initial procedure development to optimize the laser and gas metal arc welding parameters for making joints in pipeline steel. Satisfactory joint quality was obtained and it is intended to develop the process to prototype field trials.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.176-179
• /
• 2022

In this paper, we consider a sectorized wireless powered sensor network (WPSN), wherein sensor nodes are clustered based on sectors and transmit data to the cluster head (CH) using energy harvested from a hybrid access point. We construct a system model for this sectorized WPSN and find optimal coordinates of CH that maximize the achievable transmission rate of sensing data. To obtain the optimal CH with low overhead, we perform an asymptotic geometric analysis (GA). Simulation results show that the proposed GA-based CH selection method is close to the optimal performance exhibited by exhaustive search with a low feedback overhead.

• Journal of the Korean Society for information Management
• /
• v.18 no.3
• /
• pp.87-114
• /
• 2001

A hybrid information environment can be described as one where an appropriate range of heterogeneous information services is presented to the user in a consistent and integrated way via a single interface. The purpose of this study is to suggest a need of hybrid information services through understanding of the hybrid information environment and hybrid library. Additionally, this study deal with basic concepts of design for a hybrid information service model and address a number of hybrid library projects based on these concepts, such as Agora, BUILDER, HealdLine, HyLife, and MALIBU. Finally, this study survey generic a model of hybrid library and suggest basic principles for building of hybrid information service model, such as integration, seamlessness, authentication, interconnectivity, and personalization of information seeking process environment.