• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.783-790
• /
• 2012

Electric Vehicles(EVs) and Plug-in Hybrid Electric Vehicles(PHEVs) which have the grid connection capability, represent an important power system issue of charging demands. Analyzing impacts EVs charging demands of the power system such as increased peak demands, developed by means of modeling a stochastic distribution of charging and a demand dispatch calculation. Optimization processes proposed to determine optimal demand distribution portions so that charging costs and demand can possibly be managed. In order to solve the problems due to increasing charging demand at the peak time, alternative electricity rate such as Time-of-Use(TOU) rate has been in effect since last year. The TOU rate would in practice change the tendencies of charging time at the peak time. Nevertheless, since it focus only minimizing costs of charging from owners of the EVs, loads would be concentrated at times which have a lowest charging rate and would form a new peak load. The purpose of this paper is that to suggest a scenario of load leveling for a power system operator side. In case study results, the vehicles as regular load with time constraints, battery charging patterns and changed daily demand in the charging areas are investigated and optimization results are analyzed regarding cost and operation aspects by determining optimal demand distribution portions.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.86-92
• /
• 2016

Upon detecting a frequency event in a power system, the stepwise inertial control (SIC) of a wind turbine generator (WTG) instantly increases the power output for a preset period so as to arrest the frequency drop. Afterwards, SIC rapidly reduces the WTG output to avert over-deceleration (OD). However, such a rapid output reduction may act as a power deficit in the power system, and thereby cause a second frequency dip. In this paper, a hybrid reference function for the stable SIC of a doubly-fed induction generator is proposed to prevent OD while improving the frequency nadir (FN). To achieve this objective, a reference function is separately defined prior to and after the FN. In order to improve the FN when an event is detected, the reference is instantly increased by a constant and then maintained until the FN. This constant is determined by considering the power margin and available kinetic energy. To prevent OD, the reference decays with the rotor speed after the FN. The performance of the proposed scheme was validated under various wind speed conditions and wind power penetration levels using an EMTP-RV simulator. The results clearly demonstrate that the scheme successfully prevents OD while improving the FN at different wind conditions and wind power penetration levels. Furthermore, the scheme is adaptive to the size of a frequency event.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.406-434
• /
• 2019

In general, an information security approach estimates the risk, where the risk is to occur due to an unusual event, and the associated consequences for cloud organization. Information Security and Risk Management (ISRA) practices vary among cloud organizations and disciplines. There are several approaches to compare existing risk management methods for cloud organizations but their scope is limited considering stereo type criteria, rather than developing an agent based task that considers all aspects of the associated risk. It is the lack of considering all existing renowned risk management frameworks, their proper comparison, and agent techniques that motivates this research. This paper proposes Agent Based Information Security Framework for Hybrid Cloud Computing as an all-inclusive method including cloud related methods to review and compare existing different renowned methods for cloud computing risk issues and by adding new tasks from surveyed methods. The concepts of software agent and intelligent agent have been introduced that fetch/collect accurate information used in framework and to develop a decision system that facilitates the organization to take decision against threat agent on the basis of information provided by the security agents. The scope of this research primarily considers risk assessment methods that focus on assets, potential threats, vulnerabilities and their associated measures to calculate consequences. After in-depth comparison of renowned ISRA methods with ABISF, we have found that ISO/IEC 27005:2011 is the most appropriate approach among existing ISRA methods. The proposed framework was implemented using fuzzy inference system based upon fuzzy set theory, and MATLAB(R) fuzzy logic rules were used to test the framework. The fuzzy results confirm that proposed framework could be used for information security in cloud computing environment.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1289-1296
• /
• 1997

To build up a knowledge-based system in an Artifical Inerligence System, selecting an appropriate set of rules is one of the key provlems. In this paper, we discuss a new method for exteacting fuzzy rules diredtly from fuzzy membdrchip function dat for pattern classifcation. The fuzzy rules with variable fuzzy recions are defined by sharing fuzzy space in fuzzy grid.Tehse rules are extracted form memberchop function. Them, optimal input vari-ables for the rules are determined using the number of extracted rules as a criterion. The method is compared with neural networks using Ishibuchi. Finally, in order to demonstrate the cffectiveness of the present method, simulation results are shown.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.589-601
• /
• 2016

The hybrid grid was adopted and numerical prediction analysis of propeller unsteady bearing force considering free surface was performed for mode and full-scale KCS hull-propeller-rudder system by employing RANS method and VOF model. In order to obtain the propeller velocity under self-propulsion point, firstly, the numerical simulation for self-propulsion test of full-scale ship is carried out. The results show that the scale effect of velocity at self-propulsion point and wake fraction is obvious. Then, the transient two-phase flow calculations are performed for model and full-scale KCS hull-propeller-rudder systems. According to the monitoring data, it is found that the propeller unsteady bearing force is fluctuating periodically over time and full-scale propeller's time-average value is smaller than model-scale's. The frequency spectrum curves are also provided after fast Fourier transform. By analyzing the frequency spectrum data, it is easy to summarize that each component of the propeller bearing force have the same fluctuation frequency and the peak in BFP is maximum. What's more, each component of full-scale bearing force's fluctuation value is bigger than model-scale's except the bending moment coefficient about the Y-axis.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.242-252
• /
• 2017

This paper deals with the blocking of DC-fault current during DC cable short-circuit conditions in HVDC (High-Voltage DC) transmission systems utilizing Modular Multilevel Converters (MMCs), where a new SubModule (SM) topology circuit for the MMC is proposed. In this SM circuit, an additional Insulated-Gate Bipolar Translator (IGBT) is required to be connected at the output terminal of a conventional SM with a half-bridge structure, hereafter referred to as HBSM, where the anti-parallel diodes of additional IGBTs are used to block current from the grid to the DC-link side. Compared with the existing MMCs based on full-bridge (FB) SMs, the hybrid topologies of HBSM and FBSM, and the clamp-double SMs, the proposed topology offers a lower cost and lower power loss while the fault current blocking capability in the DC short-circuit conditions is still provided. The effectiveness of the proposed topology has been validated by simulation results obtained from a 300-kV 300-MW HVDC transmission system and experimental results from a down-scaled HVDC system in the laboratory.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.476-489
• /
• 2017

Under partial shading conditions (PSCs), multiple maximums may be exhibited on the P-U curve of string inverter photovoltaic (PV) systems. Under such conditions, heuristic methods are invalid for extracting a global maximum power point (GMPP); intelligent algorithms are time-consuming; and model-based methods are complex and costly. To overcome these shortcomings, a novel hybrid MPPT (MPF-IP&O) based on a model-based peak forecasting (MPF) method and an improved perturbation and observation (IP&O) method is proposed. The MPF considers the influence of temperature and does not require solar radiation measurements. In addition, it can forecast all of the peak values of the PV string without complex computation under PSCs, and it can determine the candidate GMPP after a comparison. Hence, the MPF narrows the searching range tremendously and accelerates the convergence to the GMPP. Additionally, the IP&O with a successive approximation strategy searches for the real GMPP in the neighborhood of the candidate one, which can significantly enhance the tracking efficiency. Finally, simulation and experiment results show that the proposed method has a higher tracking speed and accuracy than the perturbation and observation (P&O) and particle swarm optimization (PSO) methods under PSCs.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.421-434
• /
• 2007

Among many other CG generated natural scenes, the representation of ocean surfaces is one of the most complicated and time-consuming problem because of its large extent and complex surface movement. We present a hybrid method to represent and animate unbound deep-water ocean surfaces by utilizing graphics processor as both simulation and rendering core. Our technique is mainly based on spectral approaches that generate a high-detailed height field using Fourier transform on a 2D regular grid. Additionally, we incorporate Gerstner model and generate low-detailed height field on a 2D projected grid in order to represent large waves and main structure of ocean surface. There is no interruption between CPU and GPU, and no need to transfer simulation results from the system memory to graphics hardware because the entire simulation and rending processes are done on graphics processor. As a result we can synthesize and render realistic water surfaces in real-time. Proposed techniques are readily adoptable to real-time applications such as computer games that have heavy work load on CPU but still demand plausible natural scenes.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.194-201
• /
• 2011

The air flow supplied to a fuel cell system is one of the most significant factors in determining fuel efficiency. The conventional method of controlling the air flow is to fix the oxygen supply at an estimated constant rate for optimal efficiency. However, the actual optimal point can deviated from the pre-set value due to temperature, load conditions and so on. In this paper, the maximum efficiency point tracking (MEPT) algorithm is proposed for finding the optimal air supply rate in real time to maximize the net-power generation of fuel cell systems. The fixed step MEPT algorithm has slow dynamics, thus it affects the overall efficiency. As a result, the variable step MEPT algorithm is proposed to compensate for this problem instead of a fixed one. The complete small signal model of a PEM Fuel cell system is developed to perform a stability analysis and to present a design guideline. For a design example, a 1kW PEM fuel cell system with a DSP 56F807 (Motorola Inc) was built and tested using the proposed MEPT algorithm. This control algorithm is very effective for a soft current change load like a grid connected system or a hybrid electric vehicle system with a secondary energy source.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.517-518
• /
• 2006

본 논문은 태양광과 풍력, 축전지 시스템으로 구성된 계통연계형 복합 분산전원 시스템의 구성과 실험 결과를 제시한다. 본 논문에서 제시하고자하는 계통연계형 태양광-풍력-축전지 복합 분산전원 시스템은 태양광 발전 시스템과 풍력 발전 시스템을 에너지원으로 사용하였으며 에너지 저장장치로는 축전지 시스템을 사용하였다. 태앙광 발전 시스템과 풍력 발전 시스템, 축전지 시스템은 모두 공통 직류단에 연결되어 있으며 계통과 연계운전을 위한 계통연계 인버터 시스템을 공통 직류단과 계통 연계점 사이에 적용하여 연계점의 출력을 제어하였다. 또한 분산전원 통합제어 시스템을 개발하여 전체 복합 분산전원 시스템의 출력과 각 모듈의 상태를 감시, 제어하는 기능을 하도록 하였다. 개발된 복합 분산전원 시스템에 전력 평준화 알고리즘을 적용한 실험 결과의 제시를 통해 제작된 시스템과 전력 평준화 알고리즘의 유용성을 검증하였다. 본 논문에서 제시된 복합 분산전원 시스템은 복수의 에너지원을 이용하므로 전력공급의 신뢰도를 향상시킬 수 있어 상용전력이 공급되지 않는 도서지역 등에 단독 운전용으로 적용이 가능하다.