• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.84-97
• /
• 2017

Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.

• Composites Research
• /
• v.31 no.5
• /
• pp.177-185
• /
• 2018

Fiber metal laminate (FML) is a type of hybrid composites which consist of metallic and fiber-reinforced plastic sheets. As the FML has a drawback of the delamination that is a failure of the interfacial adhesive layer, the nominal stresses and the energy release rates should be determined to identify the delamination behavior. However, it is difficult to derive the nominal stresses and the energy release rates since the operating temperature of the equipment is restricted. For this reason, the objective of this paper is to predict the mode-I nominal stress and the mode-I energy release rate of the adhesive layer using the inverse analysis based on the Levenberg-Marquardt method. First, the mode-I nominal stress was assumed as the tensile strength of the adhesive layer, and the mode-I energy release rate was obtained from the double cantilever beam test. Next, the finite element method was applied to predict the mode-I delamination behavior. Finally, the mode-I nominal stress and the mode-I energy release rate were predicted by the inverse analysis. In addition, the convergence of the parameters was validated by trying to input two cases of the initial parameters. Consequently, it is noted that the inverse analysis can predict the mode-I delamination behavior, and the two input parameters were converged to similar values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1265-1272
• /
• 2016

The present study evaluated the effects of different cutting height on nutritive value, fermentation quality, in vitro and in vivo digestibility of whole crop barley silage. Whole crop barley forage (Yuyeon hybrid) was harvested at height of 5, 10, and 15 cm from the ground level. Each cutting height was rolled to make round bale and ensiled for 100 days. After 100 days of ensiling, pH of silage was lower (p<0.05) in 5 cm, but no difference between 10 and 15 cm of cutting height. The content of lactate and lactate to acetate ratio were increased (p<0.05) in 5 cm of cutting height, whereas the acetate content was higher (p<0.05) in 10 and 15 cm than that of 5 cm cutting height. Aerobic stability was greater (p<0.05) in silages of 10 and 15 cm of cutting height. Three total mixed rations (TMR) were formulated with silages from the three different cutting heights (TMR5, TMR10, and TMR15) incorporated as forage at 70:30 ratio with concentrate (dry matter [DM] basis). In vitro dry matter digestibility was higher (p<0.05) in the TMR5 and TMR10 than that in TMR15, whereas in vitro neutral detergent fiber digestibility was higher (p<0.05) in the TMR10 and TMR15 than that in TMR5. Concentration of $NH_3-N$ was highest (p<0.05) in the TMR10 followed by TMR15 and TMR5. Total volatile fatty acid was decreased (p<0.05) with increased cutting height. The digestibility of DM and neutral detergent fiber were highest (p<0.05) in TMR15, than those in TMR5 and TMR10, whereas acid detergent fiber digestibility was higher (p<0.05) in TMR5 than that in TMR10. The results showed that increasing cutting height, at least up to 10 to 15 cm, of whole crop barley forage at harvest (Yuyeon) may be beneficial for making silage for TMR formulation and increasing digestibility of DM and NDF.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.233-238
• /
• 2006

This study was conducted to evaluate growth characteristics, yield and feed value of newly bred domestic silage corn hybrids compared to foreign imported corn hybrid. Days to silking were $78{\sim}86$ days and longer than that of P3394 (Control). Kwangpyeongok, Cheonganok, and Cheongsaok were resistant to lodging. Such trait of stay-green of Kwanganok, Kwangpyeongok, Cheonganok, Cheongsaok, and Suwon159 was not different from that of P3394. Duruok, Kwangpyeongok, and Suwon159 were more resistant to Bipolaris maydis (southern corn leaf blight) than P3394. All of the silage corn hybrids were resistant to Exserohilum turcicum (northern corn leaf blight) and Smut. Ear ratios to total dry matter (%) of Cheonganok was similar to P3394. Ear lengths of domestic hybrids were similar or longer than that of P3394. Dry matter yield of domestic hybrids except Suwon19 and Jangdaok were similar to that of P3394. Total digestible nutrient (TDN) yields, Duruok, Kwangpyeongok, Cheonganok, and Cheongsaok were similar to P3394, but Kwanganok, Suwon19, Jangdaok and Suwon159 were lower than P3394. Acid detergent fiber(ADF), Suwon19 was lowest among all hybrids, and all hybrids except Suwon19 had values ranging from 44.7 to 49.0%, similarly with P3394. Neutral detergent fiber (NDF) values of the hybrids were similar to that of P3394, and ranged from 68.1 to 72.8%, except for Duruok which was lowest. Relative feed values (RFV) of Duruok, Kwangpyeongok, Cheonganok, Jangdaok, and Suwon159 had values ranging from 71.0 to 75.7 and were not significantly different from P3394. ADF was significantly negatively correlated with number of days to silking, number of days to maturity, and fresh matter yield, but was significantly positively correlated with resistance to corn borer. RFV showed a significantly positive correlations with no. of days to maturity and fresh matter yield, but significantly negative correlation with resistance to European corn borer. Therefore, indices for evaluation of feed value as well as production were important to select corn hybrids for silage. It is concluded that domestic hybrids tested in this study have high feed value as well as high production similar to those of imported corn hybrid.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.247-256
• /
• 2012

This study was carried out to investigate the effects of various regions of sorghum-sorghum hybrid (SSH) silage on nutritive values and qualities of SSH silage. SSH "SS405" was harvested at ripen stage and ensiled. Samples of SSH silage used in this study were collected in three regions (outside, middle and inside). The contents of crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), total digestible nutrients (TDN) and in vitro dry matter digestibility (IVDMD) in SSH silage were not influenced by SSH silage manufacture methods and lactic acid bacteria. The contents of CP in inside region of SSH silage were lower than those of outside and middle regions (p<0.05). However, the contents of NDF, ADF and TDN, and IVDMD were not different between the regions of SSH silage. The content of lactic acid in SSH round bale silage was significantly decreased (p<0.05), as compared to SSH square bale silage (SB), gunny bag silage (GB) and trench silage (TS). The contents of acetic acid and butyric acid in SSH silage were not influenced by SSH silage manufacture methods and lactic acid bacteria. The contents of lactic acid in inside region of SSH silage were lower than those of outside and middle regions (p<0.05). In addition, the contents of lactic acid, acetic acid and butyric acid were not different between the regions of SSH silage. Therefore we suggest that nutritive values and quality of SSH silage were not influenced by regions of sampling collected from these silages.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.245-250
• /
• 2005

This experiment was conducted to compare the frech and dry matter yields and feed values of Sorghum$\times$Sudangrsss Hybrid in accordance with different nitrogen and potassium fertilizer sources at the Dae-Ho reclaimed tidal land, Korea from 2003 to 2004. Soil salt contents of ammonium sulfate plots(T3, T4, T5) were higher than that of the urea plot(T2), but that of potassium sulfate plot(T6) was the lowest. The fresh yields of ammonium sulfate plots(T3, T4, T5) and potassium sulfate plot(T6) were higher than that of the urea plot(T2) as $173\%,\;173\%,\;144\%\;and\;90\%$. respectively. The dry matter and total digestible nutrient(TBN) yields were similar tendency like the results of the fresh matter yields. The crude protein(CP), neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of ammonium sulfate plots(T3, T4, T5) were higher than those of urea plot(T2), but those of potassium sulfate plot(T6) were the lowest. On the other hand, TDN content in potassium sulfate plot(T6) was the highest. It was desirable to use ammonium sulfate$(20\~30kg\;N/10a)$ and potassium sulfate fertilizer$(15kg\;K_2O/10a)$ than those of urea and potassium chloride fertilizer on reclaimed tidal land in view of forage production and its feed value.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.143-150
• /
• 2011

This study was performed to investigate the effects of harvest stage of sorghum ${\times}$ sorghum hybrid (SSH) on nutritive values and quality of round baled SSH silage manufactured with SSH grown in paddy land of Department of Animal Resources Development, National Institute of Animal Science, RDA. SSH "SS405" was harvested at two different growth stages (heading and ripen stage) and ensiled at each harvest stages. Crude protein content of round baled SSH silage increased with delayed harvest maturity, but contents of ADF (acid detergent fiber), NDF (neutral detergent fiber), TDN (total digestible nutrient) and in vitro dry matter digestibility (IVDMD) was not changed. The pH in round baled SSH silage ranged from 3.8 to 4.4 at two different harvest stages, and pH in heading stage was higher than that of ripen stage. The content of lactic acid of round baled SSH silage increased with delayed harvest maturity (P<0.05), but the content of acetic acid decreased (P<0.05). The contents of lactic acid and acetic acid in ripen stage were not influenced by manufacture method of silage. The content of acetic acid in round baled SSH silage of heading stage increased as compared to that of trench SSH silage (P<0.05). Therefore, this study suggest that round baled SSH silage manufactured in both heading and ripen stage can improve the silage fermentation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.245-252
• /
• 2012

This study was carried out to investigate the effects of three different locations of Sorghum ${\times}$ sorghum hybrid (SSH) silage on nutritive values and qualities of SSH square bale silage (SSBS) and gunny bag silage (GBS). SSH "SS405" was sown at early May, harvested at heading stage and ensiled. Samples of SSH silage used in this study were collected in three different locations (outer, middle and inner). The content of crude protein (CP) in GBS showed a slightly decreased trend, as compared to SSBS. However, the contents of neutral detergent fiber (NDF) was significantly different between SSBS and SBS (p<0.05). However, The contents of CP, NDF, acid detergent fiber (ADF) and total digestible nutrient (TDN), and in vitro dry matter digestibility (IVDMD) were not different between the parts of SSH silage. Nutritive values of SSBS and SBS were not influenced by inoculation of lactic bacteria. The content of lactic acid in SSBS was decreased as compared to SBS, but there was no significant difference between SSBS and SBS. The content of acetic acid in SSBS was significantly decreased (p<0.05), as compared to SBS. In addition, the contents of lactic acid, acetic acid and butyric acid were not different between the parts of SSH silage. Therefore we suggest that nutritive values and quality of SSBS and SBS were not influenced by parts of sampling collected from these silages.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.3
• /
• pp.295-304
• /
• 2011

This study was carried out to investigate the effect of harvest stage of Sorghum ${\times}$ Sorghum Hybrid (SSH) and manufacture methods of SSH silage on nutritive values and quality of SSH silage manufactured with SSH grown in paddy land of Department of Animal Resources Development, National Institute of Animal Science, RDA. SSH "SS405" was harvested at two different growth stages (heading and ripen stage) and ensiled at each harvest stages. The content of crude protein in both square baled SSH silage (SBSS) and bag silage (BS) increased with delayed harvest maturity, but the contents of ADF (acid detergent fiber), NDF (neutral detergent fiber) decreased. The contents of ADF and NDF was not influenced by the inoculation of lactic bacteria. The contents of TDN (total digestible nutrient) in both stage and in vitro dry matter digestibility (IVDMD) in heading stage was not influenced by the harvest stage of SSH. The pH in all SSH silage ranged from 3.8 to 4.4 at two different harvest stages, and pH in heading stage was higher than that of ripen stage (P<0.05). The content of lactic acid of all SSH silage increased with delayed harvest maturity (P<0.05), but the content of acetic acid decreased (P<0.05). The contents of lactic acid and acetic acid in ripen stage were not influenced by manufacture method of silage. The content of lactic acid in both SBSS was higher than that of both BS and RBSS in heading and ripen stage (P<0.05), but the content of acetic acid decreased (P<0.05). The contents of lactic acid and acetic acid in BS were similar as compared to that of RBSS. Therefore, we suggest that the quality of SSH silage in both heading and ripen stage can be improved by manufacture methods of SBSS and BS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.48-53
• /
• 1988

Pearl millet has been detected as a promising new forage crop of excellent quality and productivity since 1985. Its green fodder yields were 10.7 to 12.8 tons per hectare in average of 26 accessions in Suwon, 1985. The yield level was much higher than those of Italian and pro so millets and com. Com was better than Italian and proso millets, and proso millet was better than Italian millet for a green fodder crop. Suwon 1 pearl millet hybrid was the best of the 13 hybrids examined in Suwon, 1986 being 149 tons per hectare of three times cut green fodder yields. The pearl millet hybrid was higher in green fodder yield than com and sorghum/sudan grass hybrids. Leaf area index was 32.4 for the three times cut pearl millet, while 5.8 for the one time cut corn, and 20.8 for the three times cut sorghum/sudan grass. Crude protein content was 16.3 percent for pearl millet being six to five percent higher than corn and sorghum/sudan grass, 11.8 percent for the one time cut at maturity and 16.1 percent for four times cut being higher than corn and sorghum/sudan grass. Crude fat content was 3. percent for pear 1 millet grain being some what higher than corn and sorghum/sudan grass and 1.3-1.4 percent for green fodder crop. Crude fiber content in grain was 1.9 percent for pearl millet 2.6 percent for corn, and 4.3 percent for sorghum/sudan grass. Crude fiber content in pearl millet plant was 24.4 to 26.8 percent, Crude ash content was 2.4 percent in grain and 10.8 to 11.6 percent in the plants of pearl millet hybrid. In vitro digestibility of grain was 93.7 percent for pearl millet, 95.4 percent for corn, and 55.8 percent for sorghum/sudan grass. The digestibility of whole plant was 57.6 to 63.4 percent for pearl millet, 46.3 percent for corn, and 47.3 to 57.6 percent for sorghum/sudan grass. Heavier nitrogen fertilizer applications increased green fodder yields, protein content and digestibility, but reduced fat and ash content of pearl millet inbred line T 186.