• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.561-563
• /
• 2000

최근 인터넷에 대한 수요의 증가로 인해 데이터 트래픽이 음성 트래픽을 초과하는 단계로 이르고 있으며 또한 이동통신 가입자의 급증으로 인한 트래픽도 상당한 것으로 알려져 있다. 이렇게 폭증하는 망에 대한 요구를 수용하기 위해서는 단순히 광섬유를 추가로 설치하기 보다는 기존의 광섬유를 최대한 활용할 수 있어야 한다. 이를 위해 WDM 방식 광통신 시스템이 각광받고 있다. 본 연구에서는 우리나라의 실정에 적합한 트래픽을 모델링하기 위한 Pl(Population- Information factor) 트래픽 모델링 기법을 제시하며 이에 기초하여 도출된 트래픽 값으로 WBM을 수용하는 전력통신망 모델을 설계한다. 전력통신망 설계와 특성 분석을 위하여 Visual C로 시뮬레이션 툴을 개발하였으며, 본 결과는 향후 WDM을 수용한 전광전송망을 구축할 때 활용될 수 있다.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.80-82
• /
• 2005

There is a method for stringing conductors which is connected to a wire over transmission towers by helicopter or human power and the wire and conductors are pulled by an engine puller. The length of one string section is usually 4-6 km and 2-4 conductors are strung at the same time with a single wire. A tensioner is used to maintain the sag and a running board is installed between the wire and conductors to prevent the rotation of conductors but the variance in topology, the line angle and unequal wiring tension between conductors causes conductor rotation damage or the conductor connection point to breakaway when the pulley is passed. This paper presents a method to prevent conductor rotation during stringing by inserting a pulley in the running board and equally maintaining conductor tension by sling wire after developing and testing.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.181-181
• /
• 2006

We developed a novel method to fabricate a nerve guide conduit (NGC) with the porosity of submicron pore sizes (to prevent fibrous tissue infiltration) and hydrophilicity (for effective oxygen and nutrient permeation) using poly(lactic-co-glycolic acid) (PLGA) and Pluronic F127 by a modified immersion precipitation method designed by our laboratory. It was recognized that the hydrophilized PLGA/F127 (3 wt%) tube can be a good candidate as a NGC from the analyses of its morphology, mechanical strength, hydrophilicity, model nutrient permeability and in vivo nerve regeneration behavior using a rat model.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.43-49
• /
• 2012

Depth sensitivity is considered one of the factors influencing 3D displays the most. In this paper, the perceptual 3D depth was quantitatively measured to compare the depth difference among the display devices. No difference was found in the typical display performance among the devices, but the subjective evaluation of the depth sensitivity where the disparity was varied showed that the organic light emitting diode (OLED) had the highest performance, mainly due to its almost 0% crosstalk, one of the features of OLED. Crosstalk is a form of image superposition that greatly affects the depth sensitivity. The experiment results showed that the quantitative depth sensitivity varies due to geometric factors such as disparity, viewing distance, and subjective sensitivity, depending on the display image characteristics, such as crosstalk and contrast.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.452-454
• /
• 2002

In case the overload of an existing power line is expected as the consumption of electric power increase, we substitute STACIR/AW which has better thermal characteristic for ACSR. That can approximately double the transmission capacity. In that case the mechanical characteristics of STACIR/AW should meet the design condition of the existing tower. However, the strength of invar in STACIR/AW is lower than that of steel in ACSR, which makes it difficult to keep the safety of a conductor specially in a long span In this regard, this paper presents the new conductor model using the AMC and the analysis of its characteristics.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.786-793
• /
• 2006

For the purpose of developing a vibration-based tension force evaluation procedure for hangers in suspension bridges, a 3D finite element model of hangers is constructed in this paper. With the developed finite element formulation, a frequency-based sensitivity-updating algorithm is applied to identify the target cable system the proposed method is also able to identify the flexural rigidity. the axial rigidity, and the torsion rigidity of a cable. For a field application, a vibration test on hangers of the Yong Jong Grand Suspension Bridge is carried out and the collected data is used to verify the proposed method.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.421-426
• /
• 2015

This paper presents a practical method for estimation of average temperature in the permanent magnet (PM) of electric machine by using finite element analysis (FEA) and dynamo load experiment. First of all, the temperature effect of PM to the torque has been employed by FEA in order to evaluate the Temperature-Torque characteristic curve. The 1st order polynomial equation which is torque attenuation coefficient is derived by the FEA result of the Temperature-Torque curve. Next, torque saturation test with constant current condition is performed by dynamo load experiment. Then, the temperature trend can be estimated by adding the initial starting temperature using the torque attenuation coefficient and torque saturation curve. Lastly, estimated temperature is validated by infrared thermometer which measures temperature of PM surface. The comparison between the estimated result and experimental result gives a good agreement within a deviation of maximum $8^{\circ}C$.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.19-23
• /
• 2008

We have fabricated pressure sensitive paint films consisting of PtTFPP activators dispersed in fluorinated polymer matrix. This matrix material is unique in its composition and structure. We evaluated the oxygen quenching effects, and thus the pressure sensitivity, of the fabricated films in terms of various processing parameters. Based on the experimental results, we anticipate that a good but new pressure sensitive paint would be presented through further elaboration of the polymer compositions and optimization of the processing conditions.

• Journal of the Korea Society for Simulation
• /
• v.14 no.4
• /
• pp.77-86
• /
• 2005

[ $IP^2$ ] (IP-based IMT Network Platform) is a ubiquitous platform supporting mobility using two step If address IPha (IP host address) and IPra (IP routing address) - in a backbone network. MN (Mobile Node) in $IP^2$ maintains either Active or Dormant state, which is transferred to Active state through Paging process when communication is required. In this paper, we proposed a Paging method using proxy to resolve the problem of the conventional Paging method which transmits the Paging messages to all cells in LA (Location Area) resulting in the excessive use of network resources. Performanceevaluation of the proposed method using NS-2 showed that the usage of network resources becomes more efficient by reducing paging loads, especially under the condition of increased nodes.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.2 s.33
• /
• pp.213-229
• /
• 2007

Objective : This study investigated results of treatment of Atopic Dermatitis(AD) patients diagnosed as damp-heat type with herbal medicine and wet dreesing. Method : Six AD subjects diagnosed as damp-heat type were selected from the outpatient department of East-West Neo Medical Center in the period of Dec. 2006 to Feb. 2007. Each subject was treated with herbal medicine and wet dressing. Severity Scoring of Atopic Dermatitis(SCORAD) was used to evaluate the effect of treatment and pictures were taken of the Atopic dermatitis lesions. Result & Conclusion : We observed improvement on SCORAD score, especially intensity score of damp-heat type when they were treated with herbal medicine and wet dressing. However, it is less effective and AD often recurs in case of chronic adult-type AD. In addition, nipple eczema in some patients has showed a tendency to improve slowly and recur easily compared to other lesions.