• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2005년도 추계학술발표논문집
• /
• pp.157-171
• /
• 2005

초지와 인쇄시의 지절은 생산성 또는 운전성의 저하를 야기하므로 최소화해야 한다. 지종에 따라 초지조건이 달라지므로 종이에 가해지는 인장력, 함수율, 초지속도 등을 고려해야 한다. 종이에 있어서 결점 부근에서 일어나는 항복(yield)과 파괴현상을 파괴역학적 관점에서 연구한 바 있다. 초지공정은 섬유 매트 또는 습지에서 점차적으로 수분이 제거되는 과정이며, 인쇄공정은 종이에 물이 가해지는 과정이 있으나, 파괴인성 측면에서 동일한 이론을 적용할 수 있다. 박과 이는 초지시 섬유의 특성, 미세분의 종류 및 함량에 따른 인장 특성 및 파괴 특성에 관한 연구에서 Sw-BKP의 경우 섬유의 파괴가 유도되고, Hw-BKP의 경우 결합면의 파괴가 유도되는 것으로 나타났으며, 미세분 특성에 따른 시험 결과 파괴 인성은 섬유간 실제적 결합이 유도되는 경우 파괴 인성의 향상을 가져올 수 있는 것으로 나타났다. 파괴 역학은 결점 부위의 응력집중 현상에 따른 독특한 파괴 거동으로 지합등과 같은 응력 확산 효과를 기대할 수 없기 때문에 섬유간 실제적인 결합에 직접적으로 의존한다고 할 수 있다.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.64-74
• /
• 2001

This study is to find the effect of the molecular weight distribution of components on the freeness and physical properties of paper by observing the change of properties according the modification of fibers by using production technology and process technology together to develop additives which can effectively control according to the purpose of paper-making process and by combining low molecular weight cellulase (below MW 20,000; CMC activity 400 unit) with different enzyme's molecular weight and activity and high molecular weight cellulase(MW 20,000∼80,000;CMC activity 90,000 unit) and then process them in Sw-BKP(Softwood Bleached Kraft Pulp) and Hw-BKP(Hardwood Bleached Kraft Pulp) and Cotton Linter Pulp and OCC(Old Corrugated Container) with different properties of pore of surface of fibers respectively, since it is judged that making the appropriate composition ratio of components is necessary in consideration of the properties of fibers and paper-making process.

• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.45-57
• /
• 2007

Properties of newly developed paper from Red Algae Pulp (RAP) were examined. The paper samples were prepared according tomixing RAP fiber with wood fibers, HwBKP and SwBKP, to form a paper with $60\;g/m^2$ in weight. It was prepared in three to four different levels of refining degree and pressure so that it can reveal different bulk level in order to clearly compare the opacity at equivalent bulk for each furnish compositions. printability of RAP fiber revealed superior effect on print through repression and initial ink absorption. Those properties are expected to improve further if printability improvement effect due to smoothness improvement is added.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 춘계학술대회
• /
• pp.129-134
• /
• 2008

Properties of newly developed paper from Red Algae Pulp (RAP) were examined. The paper samples were prepared by mixing RAP fiber with wood fibers, HwBKP and SwBKP, to form a paper with $60g/m^2$ in weight. It was prepared in three to four different levels of refining degree and pressure so that it can reveal different bulk level in order to clearly compare the opacity at equivalent bulk for each furnish compositions. Printability of RAP fiber revealed superior effect on print through repression and initial ink absorption. Those properties are expected to improve further if printability improvement effect due to smoothness improvement is added.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.77-77
• /
• 1999

담배용 필터에 사용되고 있는 재료는 아세테이트, 종이, 폴리프로펼렌, 부직포등이 주로 이용되고 있으 며 담배연기의 흡착능을 향상시키기 위한 방법으로 활성탄 제오라이트와 같은 흡착제를 담배필터에 첨가하여 사용하고 있다. 본 실험에서는 펼터에 가장 보편적으로 많이 사용하고 있는 활성탄을 종이 제조과정에 첨가하여 나타나는 물리적 특성을 관찰하였고 제조된 종이를 담배필터에 적용하기 위하여 현행 습식 크림핑(crimping)방법과는 달리 건식 크림핑(crimping)방법을 이용한 적합한 조건을 검토하 였으며 이에 따른 담배필터에서의 연기흡착능을 분석한 결과는 다음과 같다. 1. 시트의 물리적 특성과 담배 연기성분 홉착능을 예측하기 위하여 펄프의 불성과 uv 홉착능을 분 석한 결과 Sw-BKP가 Hw-BKP에 비하여 강도적 성질이 우수하였고 또한 메틸렌불루(methylene b blue) 흡착능도 높은 경 향을 나타내 었다. 2. 활성탄 함량의 증가에 따라 섬유간의 결합력이 약화됨에 따라서 시트의 인장강도 및 파열강도가 감 소하는 경향이 가장 크게 나타났으며 평량이 펼프 배합비보다 높은 인자로 작용하였다. 또한 인자 간의 교호작용에서는 평량과 활성탄 함량에 따라서 크게 나타났으며 평량, Sw-BKP의 함량이 증가할 수록 인장강도는 증가하였다. 3. Stiffness는 활성탄 함량 펄프 배합비 평량의 순에따라 중요한 인자로 작용하였고 활성탄 함량 이 많을수록 stiffness는 감소하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교 호작용은 평량과 활성탄 함량이 다른 요인에 비하여 높은 경향을 보였다. 4. 인열강도는 활성탄 함량이 증가함에 따라 가장 크게 감소하였고 시트의 평량이 펄프 배합비보다 높은 인자로 작용하였으며 평 량 Sw-BKP의 함량이 높을수록 증가하였다 인자간의 교호작용에서는 펄프 배합비와 활성탄 함량에 따라 크게 나타났다. 5. 종이 필터지에서 시트의 평량이 bulk에 가장 큰 인자로 작용하였는데 이는 같은 두께에서 평량올 변화시킨 요인으로 판단되며 시트의 평량이 높을수록 감소하였고 활성탄 함량, Sw-BKP의 배합비 가 높을수록 증가하였다. 또한, 인자간의 교호작용은 평 량과 활성 탄 함량에 따라 크게 작용하였다. 6 6. Crimp index는 관능검사 결과로서 활성탄 함량이 증가함에 따라 현저하게 저하되었으며 평량 및 S Sw-BKP의 배합비가 높을수록 양호한 결과를 나타내었다. 인자간의 교호작용에서는 평량과 펄프 배합비에 따라 가장 높은 경향을 나타내었다. 7 활성탄을 첨가하여 제조한 종이필터의 담배 연기성분 흡착능은 acetate tow에 charcoal을 첨가한 필터에 비하여 tar흡착능이 6% 이상 향상되었고, 특히 증기상 물질(vapour phase)중 aldehyde류에 대한 제거율(removal efficiency)이 높게 나타났다. 8. 건식 크림핑 방법에 의한 담배필터 제조시 펼프의 홉착능, 시트의 강도적 특성, 크림핑 조건 및 담 배 연기성분 흡착능 등을 고려하여 적정조건을 선정하였으며, 펄프 배합비(Sw-BKP따w-BKP)는 6 65/35, 시트의 평량은 40g/$m^2$ 활성탄 함량은 10% 이었다.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.111-118
• /
• 2016

The effects of pulp beating degree and bulky promotor concentration on the properties of handsheet including a bulk and strength have been investigated during manufacturing of low density paper (high bulk paper) with cationic fatty acid bulky promotor. It was found that paper bulk increased with increasing cationic fatty acid bulky agent concentration, while tensile strength decreased. On the other hand the opacity of handseets also increased with increasing cationic fatty acid bulky agent concentration, while brightness decreased slightly. With increasing pulp beating degree, paper bulk as well as tensile strength increased, while opacity decreased. Brightness did not show a significant difference with increasing pulp beating degree. The highest bulk and strength values were observed when 1.5% (SwBKP) and 2% (HwBKP) of bulky promotor was treated into the 450 mL CSF pulp slurry.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.43-48
• /
• 2011

Filler loading at thick stock was carried out in order to verify if the dual addition of filler can be used as a means to reduce the detrimental effects of filler on the strength properties of paper. PCC was added to 3.5% pulp slurry blended with HwBKP, BCTMP and SwBKP. Cationic starch was used as a fixing agent. The mixture of PCC and pulp was stirred for 5, 10 and 20min. at 1,000 rpm. The remaining PCC was washed out before handsheet making. PCC particles were flocculated and fixed on the pulp fiber and/or space between fibers. It is expected that the flocculation and inclusion of PCC can be helpful to improve the strength properties of paper due to the reduction of detrimental effect in fiber bonding. The distinct tendency in PCC flocculation and fixing on pulp fiber was not observed by the change of cationic starch dosage and treatment time.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 춘계학술발표논문집
• /
• pp.76-84
• /
• 2002

Fracture toughness was considered as one of the good estimates of the paper break tendency of paper web in the press room. Paper break on the paper machine is caused by many factors such as paper machine irregular vibrations, impurities in the fiber furnish, shives, and so on. On the paper machine, the solid content of paper web is changing very rapidly from less than 1% to over 95%. We tried to measure the fracture toughness of paper web at different solid contents for providing the fundamental knowledge of paper break. Stretches of wet web were also measured and compared to the fracture toughness changes. Four different fiber furnishes (SwBKP, HwBKP, ONP, and OCC) were refined to different degrees, and at different solid contents (40%, 60%, 80%, and 95%), their fracture toughnesses were measured. Two fracture toughness measurement methods (essential work of fracture and Tryding's load-widening method) were used, and we found they gave identical results. The stretch curves of the wet webs against the axis of solid contents were very similar to the fracture toughness curves of those.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.154-163
• /
• 2015

Because of acute or chronic intoxication by carbon disulfide, viscose rayon industry is strictly subjected to environment regulatory approval. Recently, non-wood fibers are frequently considered as a raw materials for the manufacture of specialty paper for the higher physical strength and functionality. Among the non-wood fibers, hemp bast fiber is one of the most widely used materials in viscose rayon yarn industries. In this study, the handsheet for manufacturing the viscose rayon yarn was prepared with wood pulp fibers and hemp bast fibers. The proper mixing ratio of wood fibers and hemp bast fibers with dry-strength agent and nano-celluloses was analysed in terms of physical and mechanical strength of sheet for viscose rayon yarn. The papermaking conditions for high mechanical strength of sheet were obtained by mixing the SwBKP and HwBKP fibers with freeness level of 200 mL CSF. The dual polymer system by controlling the addition ratio of PVAm and anionic PAM was also important. The addition of nano-cellulose into wet-end furnishes increased the physical strength of sheet, and improved the paper structure for the production of viscose rayon yarn.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.37-44
• /
• 2001

Fracture toughness was considered as one of the good estimates of the paper break tendency of paper web in the press room. Paper break on the paper machine is caused by many factors such as paper machine irregular vibrations, impurities in the fiber furnish, shives, and so on. On the paper machine, the solid content of paper web is changing very rapidly from less than 1% to over 95%. We tried to measure the fracture toughness of paper web at different solid contents for providing the fundamental knowledge of paper break. Stretches of wet web were also measured and compared to the fracture toughness changes. Four different fiber furnishes (SwBKP, HwBKP, ONP, and OCC) were refined to different degrees, and at different solid contents (40%, 60%, 80% and 95%), their fracture toughnesses were measured. Two fracture toughness measurement methods (essential work of fracture and Tryding's load-widening method) were used, and we found they gave identical results. The stretch curves of the wet webs against the axis of solid contents were very similar to the fracture toughness curves of those.