• 제목/요약/키워드: Humidity sensing characteristics

검색결과 61건 처리시간 0.029초

R.F.스퍼터링법에 의해 제작된 TiO2 박막의 습도감지특성 (Humidity Sensing Characteristics of TiO2 Thin Films Fabricated by R.F.Sputtering Method)

  • 유도현
    • 전기학회논문지
    • /
    • 제62권7호
    • /
    • pp.974-979
    • /
    • 2013
  • $TiO_2$ thin films are fabricated using R.F.sputtering method. $TiO_2$ thin films are coated on $Al_2O_3$ substrate printed IDE(interdigitated electrode). Impedance of thin films decreases according to increase relative humidity and it increases according to decrease measuring frequency. When substrate temperature is room temperature, impedance of thin films is from 45.68[MHz] to 37.76[MHz] within the limits from 30[%RH] to 75[%RH] at 1[kHz]. Whereas when substrate temperature is 100[$^{\circ}C$], impedance of thin films is from 692[kHz] to 539[kHz] within the limits from 30[%RH] to 75[%RH] at 1[kHz]. Impedance variation of thin films is bigger in low frequency regions than in high frequency regions. When substrate temperature is 100[$^{\circ}C$], impedance of thin films is lower than that of room temperature.

MEMS 기술을 이용한 온도, 압력, 습도 복합 센서 (Multi-functional (Temperature, Pressure, Humidity) Sensor by MEMS technology)

  • 권상욱;원종화
    • 대한전자공학회논문지SD
    • /
    • 제42권11호
    • /
    • pp.1-8
    • /
    • 2005
  • 본 논문은 MEMS (Micro-Mechanical-Electronic System) 기술을 이용한 온도, 압력, 습도 복합 센서의 설계와 제작, 그리고 평가에 관한 것이다. 이러한 MEMS 복합 센서는 휴대 전화나 PDA와 같이 가정용 제품에 사용되어 환경을 모니터링하는 건강 측정용 센서로서 사용될 것이다. 이 연구의 범위는 이러한 개별 센서의 연구 및 모든 센서를 하나의 실리콘 웨이퍼 상에서 집적할 수 있는 구조에 관한 연구, 그리고 복합 센서를 MEMS 공정에서 제작할 수 있는 공정 호환성에 대한 연구와 얻어진 센서 prototype의 측정, 평가로 이루어져 있다. 이 연구에서 우리는 온도와 압력 센서의 경우에는 선형성과 이력특성이 $1\%FS$안에 들어오는 특성을 얻었으며 단지 습도 센서의 경우에는 $5\%FS$에 해당하는 선형성과 이력 특성을 얻었다. 다만 원리적으로 습도 센서의 동작 특성은 비선형적이며 우리가 3차로 근사화할 경우에 보다 낳은 결과를 얻을 것을 기대할 수 있다. 이러한 특성을 더욱 개선하기 위한 것은 추후의 연구 영역이 될 것이다.

습도센서용 $MaFe_2O_4-LiNgVO_4$ 세라믹스의 센서특성 (Sensor characteristics of $MaFe_2O_4-LiNgVO_4$humidity sensing ceramics)

  • 소지영;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제4권1호
    • /
    • pp.31-37
    • /
    • 1991
  • 습도센서용 기판으로 사용하기 위한 MgFe$_{2}$O$_{4}$ 세라믹스의 성능개선을 위하여 Li$_{2}$CO$_{3}$와 V$_{2}$O$_{5}$를 첨가한 MgFe$_{2}$O$_{4}$-LiMgVO$_{4}$ 세라믹스를 만들고, 기공율, 기공분포, 센서특성, 응답속도 등을 조사하여 다음의 결과를 얻었다. 기공율은 MgFe$_{2}$O$_{4}$ 세라믹스가 29[%]에서 34[%]인데 비하여 본 연구결과는 34.5[%]에서 39[%]로 증가하였으며 센서특성은 $10^{7}$ [.OMEGA.] 단위의 변화에서 $10^{7}$ [.OMEGA.]에서 $10^{6}$[.OMEGA.] 단위로 변화함을 알수 있었고 응답속도는 10초정도 빨라졌음을 알수 있었다. 또한 기공분포를 이용하여 모형 센서를 제안하여 시뮬레이션을 하고 실제 특성과 이론적인 특성을 비교하였다.

  • PDF

습도와 온도에 따른 Polypyrrole 센서의 methanol에 대한 반응특성 (Effect of humidity and operating temperature on sensing characteristics of polypyrrole methanol sensors)

  • 허용수;전희권;이경문;;이덕동;허증수
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.133-133
    • /
    • 2003
  • 가스센서는 인간의 오감 중에 후각 기능을 대신하는 것으로 사회 여러 분야에 응용범위가 확대되고 있다. 유기화합물(VOC; volatile organic compounds) 가스는 대기환경을 오염시켜 스모그를 발생하며 인체에 발암을 유발하는 물질이기 때문에 많은 문제와 규제가 예상되고 있다. 따라서 VOC를 감지하고 정확히 분석할 수 있는 환경 측정용 센서에 대한 요구가 절실해지고 있다. 최근에는 고온에서 동작하는 산화물 반도체 센서와는 달리 상온에서 유해성 가스를 감지할 수 있는 전도성 고분자의 특성이 알려지면서 센서 물질로 각광을 받고 있으며, 특히 유해성 가스인 VOC 가스를 검지 할 수 있는 센서로서 주목을 받고 있다. 전도성 고분자인 Polypyrrole를 pyrrole monomer, APS, DBSA를 사용하여 $0^{\circ}C$, 1기압에서 화학중합을 하였다. 만들어진 powder를 chloroform과 DBSA를 사용하여 용액을 만들어 전극에 dipping하고 7$0^{\circ}C$, 질소 분위기에서 1시간동안 건조를 하고 methanol에서 1시간동안 soaking 처리를 한 뒤 7$0^{\circ}C$, 질소 분위기에서 4시간동안 열처리 과정을 통해 센서를 제조하였다.

  • PDF

저 전력용 CO가스 감지소자 (C Gas Sensors Operating at Relatively Low Temperature)

  • 이성필;이용현;이덕동;손병기
    • 대한전자공학회논문지
    • /
    • 제23권6호
    • /
    • pp.766-772
    • /
    • 1986
  • SnO2/Pt CO gas sensors operating at relatively low temperature were fabricated, and their performance characteristics were measured. When the mixing weight ratio of SnO2/Pt was 99.5/0.5, a good sensitivity to CO gas was obtained. And the experimental results were in consistent with the gas sensing model. The optimum operating, temperature range of the fabricated devices was 50-80\ulcorner and the response time was 15 sec. at 80\ulcorner in 1000 ppm CO ambient. The humidity dependence of sensitibity to CO gas could be reduced by adding hydrophokbic silica to the mixture of SnO2 and Pt. For the practical application of the fabricated devices, a CO gas alarming system has been developed.

  • PDF

태양광도계 자료를 이용한 한반도 내 Himawari-8 관측 AOD 특성 분석 (Analysis of AOD Characteristics Retrieved from Himawari-8 Using Sun Photometer in South Korea)

  • 이기택;유선우;이태영;서명석
    • 대한원격탐사학회지
    • /
    • 제36권3호
    • /
    • pp.425-439
    • /
    • 2020
  • 최근 성능이 크게 개선된 정지궤도 기상위성 Himawari-8, GK2A등이 운용됨에 따라 시공간적으로 보다 고해상도 AOD(Aerosol Optical Depth) 자료의 사용이 가능해졌다. 본 연구에서는 최근 4년간 한반도내 AERONET(Aerosol Robotic Network) 참여 5개 지점(서울대학교, 연세대학교, 한국외국어대학교, 광주과학기술원(GIST), 안면도 기후변화감시센터)의 에어로졸 관측 자료를 이용하여 Himawari-8/AHI(Advanced Himawari Imager) 에어로졸 산출물의 특징과 두 AOD 자료 간에 차이가 발생하는 원인에 대해 분석하였다. 분석결과 위성과 지상관측 AOD는 하늘이 맑을 경우(운량 < 3)에는 지리적 위치에 관계없이 매우 유사하게 나타났다. 하지만 운량이 증가할 경우 위성 관측과 지상관측 AOD의 차이는 지리적 위치에 관계없이 현저하게 증가하였다(편의: 0.05(맑음) → 0.21(전체), 상관계수: 0.74 → 0.64, RMSE: 0.21 → 0.51). 5개 지점 모두에서 운량이 많거나 상대습도가 높을 때 위성이 지상관측에 비해 AOD를 크게 과대 추정하는 것으로 보아 두 AOD 자료 간의 차이는 주로 운량과 상대습도와 관련이 깊은 것으로 판단된다. 하지만 풍속, 가강수량, 구름 하부 높이, 그리고 옹스트롬 지수(Angstrom Exponent)는 두 AOD 자료 간의 차이에 영향을 미치지 않는 것으로 보인다. 본 연구의 결과는 운량이 많을 경우 위성 관측 AOD 자료 사용시 주의가 필요함을 제시한다.

다중 이용 시설에 대한 온.습도 모니터링에 관한 연구 (The Study on the Monitoring of Temperature and Humidity in Public Utilization Facilities)

  • 최만용;채경희;김기복;김수언
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.1470-1475
    • /
    • 2009
  • Until now for the safety of structures and equipment monitoring technology to measure the amount of the physical, if that is the one, one-point or single-source target is one the most. Therefore, becoming more numerous and complex to measure the amount of physical measurement technology that is comprehensive and complex, multi-source concepts to the monitoring of a multi-sensing technology is required. Have the same characteristics of multi-source multi-use space such as a multi-structure of facilities/equipment is. The people's safety in a multi-use facility will be directly related to life and even a little carelessness can lead to large-scale disaster occurs because of several factors, risks and to manage detect in advance the development of an intelligent monitoring technology is essential. Therefore, this study shows that multiple structures/facilities to improve the quality of human life in research to maintain a safe and comfortable living space for multi-source intelligence to the development of monitoring technology to achieve that goal, and the ubiquitous sensor network system on the basis of the wireless transmission module, and multiple research facilities/equipment for the ultra-small sensors for health monitoring study was performed.

  • PDF

NDVI와 기온자료를 이용한 광역증발산량의 추정 (Estimation of Areal Evapotranspiration Using NDVI and Temperature Data)

  • 신사철;안태용
    • 한국지리정보학회지
    • /
    • 제7권3호
    • /
    • pp.79-89
    • /
    • 2004
  • 원격탐사 기법은 식생 및 토지이용과 같은 지형조건과 관련된 증발산량을 산정하기 위한 하나의 수단으로 효과적으로 이용될 수 있다. 지표면에서 발생되는 증발산량을 지배하는 인자는 기온, 습도, 바람, 일사량 및 토양조건 둥 매우 복잡하게 구성된다. 식생은 그 지점의 증발산량에 영향을 주고 있으며, 증발산량을 지배하는 복잡한 인자는 식생의 성장조건에 직접적으로 영향을 미친다. 결국 증발산량과 식생조건 사이에는 강한 상관관계가 성립될 수 있음을 예상할 수 있다. 비교적 넓은 지점에 대한 식생상태를 파악을 위해서는 NOAA/AVHRR 자료가 효과적으로 이용될 수 있으며, 이로부터 얻어지는 식생지수(NDVI)를 이용함으로서 증발산량과 NDVI 사이의 강한 상관관계를 생각할 수 있다. 본 연구에서는 이러한 점을 근거로 하여 NDVI와 기상자료를 조합하는 간편한 방법에 의한 실제증발산량 산정방법을 제안한다.

  • PDF

MODIS NDVI와 기상요인을 고려한 마늘·양파 주산단지 단수예측 모형 개발 (Development of Garlic & Onion Yield Prediction Model on Major Cultivation Regions Considering MODIS NDVI and Meteorological Elements)

  • 나상일;박찬원;소규호;박재문;이경도
    • 대한원격탐사학회지
    • /
    • 제33권5_2호
    • /
    • pp.647-659
    • /
    • 2017
  • 마늘과 양파 재배는 작물의 생육 조건과 주산지 기상에 영향을 받는다. 따라서 단수를 예측할 때에는 주산지의 작황과 기상을 고려할 필요가 있다. 본 연구에서는 2006년에서 2015년까지의 작물의 생육 조건을 반영한 MODIS NDVI와 7개 주산지의 기상요인을 다중 회귀 모형에 적용하여 주산지별 마늘 및 양파의 단수예측 모형을 개발하였다. 다중 회귀 모형에서 독립변수 채택은 단계적 선택방법을 이용하였다. 그 결과, 마늘과 양파 단수예측 모형은 2월의 MODIS NDVI가 중요한 독립변수로 채택되었다. 기상요인은 마늘의 경우, 평균온도(3월), 강우량(11월, 3월), 상대습도(4월), 최저온도(6월)가 채택되었으며, 양파는 강우량(11월), 일조시간(1월), 상대습도(4월), 최저온도(6월)가 독립변수로 채택되었다. MODIS NDVI와 기상요인을 이용한 단수예측 모형은 주산지별 마늘, 양파 평균 단수의 84.4%, 75.9% 설명력을 나타내었으며, RMSE는 각각 42.57 kg/10a, 340.29 kg/10a로 나타났다. 따라서 본 모형은 MODIS NDVI와 기상요인에 따른 마늘과 양파의 단수 변화특성을 잘 반영하고 있는 것으로 판단된다.

웨어러블 디바이스를 위한 은 나노와이어 코팅 전도사 개발 (The Development of Electro-Conductive Threads Coated with Silver Nanowires for Use in Wearable Devices)

  • 김지민;윤창상
    • 한국의류학회지
    • /
    • 제45권4호
    • /
    • pp.674-684
    • /
    • 2021
  • Recent advances in electronic technology have engendered a need for research on the use of smart materials in clothing. Electro-conductive fibers are expected to be a crucial element of wearable devices. Therefore, in this study, we have attempted to develop electro-conductive threads and cables using silver nanowires. Based on the characteristics of silver nanowire, in which electro-conductivity can be imparted via heat treatment, we prepared conductive threads by coating nylon yarn with silver nanowires and curing at temperatures of 140℃, 150℃, and 160℃. Conductive threads cured at 140℃ had the highest conductivity, followed by threads cured at 160℃ and 150℃ respectively. The order of the electrical conductivity of the threads after tensile testing was consistent with the original order of the conductivity of the threads. When we evaluated the sensing performance of electro-conductive cables fabricated from these threads, the cables manufactured from threads cured at 140℃ and 160℃ were found to function normally within temperature and humidity sensors. All the cables operated normally in illuminance and electrocardiogram sensors. Thus, we believe that threads made of silver nanowire have sufficient electrical conductivity to be utilized as wearable sensors.