• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.237-254
• /
• 2005

The vast mechanical systems could be classified as closed loop system, open loop system and open & closed (switching) system. In the closed loop system, the kinematics and dynamics of 3-D mechanisms will be reviewed and closed form solutions using the direction cosine matrix method and reflection transformation method will be introduced. In the open loop system, kinematic & dynamic analysis methods regarding the redundant system which has more degrees of freedom in joint space than those of task space are reviewed and discussed. Finally, switching system which changes its phase between closed and open loop motion is investigated with the principle of dynamical balance. Among switching systems, the human gait in biomechanics and humanoid in robotics are presented.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.139-145
• /
• 2004

This paper presents human-in-the-loop evaluations of vehicle stability control(VSC) system using a driving simulator. A driving simulator which contains full vehicle nonlinear model is evaluated by using actual vehicle test data on the same driving conditions. Braking control inputs for Vehicle Stability Control system have been directly derived from the sliding control law based on vehicle planar motion equations with differential braking. Closed-loop simulation results at realistic driving situations have shown that the proposed controller reduces driving effort of a driver and enhances stability of a vehicle.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.109-114
• /
• 2004

This paper presents a closed-loop evaluation of the Vehicle Stability Control (VSC) system using a vehicle simulator. Human driver-VSC interactions have been investigated under realistic operating conditions in the laboratory. Braking control inputs for vehicle stability enhancement have been directly derived from the sliding control law based on vehicle planar motion equations with differential braking. A driving simulator has been validated using actual vehicle driving test data. Real-time human-in-the loop simulation results in realistic driving situations have shown that the proposed controller reduces driving effort and enhances vehicle stability.

• 한국시스템다이내믹스연구
• /
• 제2권2호
• /
• pp.63-84
• /
• 2001

There are many activities to improve Nuclear Power Plant(NPP) performance and safety such as equipment improvement, redundancy and the like. Since public perception about NPP safety affects nuclear policy of site selection. Recent researches for NPP safety are including not only technical approaches but also social ones. In. this contexture, the purpose of this study is to develope cuassal loop digaram for assessment of organizational and human factors in NPP safety. Through real data from interview with NPP employees we develope causal loop diagram which can explain the relations of cause and effect among variables, and depict social system for organizational and human factors in NPP safety.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.76-84
• /
• 2020

• 한국항공우주학회지
• /
• 제43권8호
• /
• pp.739-747
• /
• 2015

무인항공기시스템 수요의 증가와 기술의 급격한 발전에 따라, 많은 국가들에서 기존의 공역 시스템에 무인항공기를 통합하려는 시도가 이루어지고 있다. 통합 운용을 위한 규정을 제정하기 위해서는 비행성능의 차이, 통제와 통신의 특징, 항공기간 분리 방법, 인간과 기계의 상호작용과 같은 무인항공기의 통합이 전체 시스템에 끼치는 영향에 대한 이해가 중요하다. 인하대학교에서는 공역 내에서의 무인항공기의 영향을 실제 운용 인력이 참여하는 Human-in-The-Loop(HiTL) 시뮬레이션을 통하여 연구할 수 있는 항공관제시뮬레이션 시스템을 개발하였다. 본 논문에서는 이를 이용하여 무인항공기와 유인기가 조우하는 3가지의 시나리오를 설정하고, 관제사의 관제명령을 통하여 위험 상황을 해결하는 시험을 진행하여 조종사와 관제사의 반응 속도와 각 기동에 대한 위험도를 분석한 과정과 결과를 제시한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1147-1156
• /
• 1993

In order to analyze lateral control in the backward maneuver of a tractor -trailer combination , a kinematic vehicle model and a human operator model with time delay were utilized for the operator/vehicle system. The analysis was carried out using the frequency domain approach. The open-loop stability of the vehicle motion was analyzed through the transfer functions. The sensitivity of the stability of the vehicle motion. to a change in the steering angle, was also analyzed. A mathematical model of the closed -loop operator/vehicle system was then formulated. The closed -loop stability of the operator /vehicle system was then analyzed. The effect of the delay time on the system was also analyzed through computer simulation.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.797-807
• /
• 2020

Due to the influence of nonlinearity and time-variation, it is difficult to establish an accurate model of concrete frame structures that adopt active controllers. Fuzzy theory is a relatively appropriate method but susceptible to human subjective experience to decrease the performance. This paper proposes a novel artificial intelligence based EBA (Evolved Bat Algorithm) controller with machine learning matched membership functions in the complex nonlinear system. The proposed affine transformed membership functions are adopted and stabilization and performance criterion of the closed-loop fuzzy systems are obtained through a new parametrized linear matrix inequality which is rearranged by machine learning affine matched membership functions. The trajectory of the closed-loop dithered system and that of the closed-loop fuzzy relaxed system can be made as close as desired. This enables us to get a rigorous prediction of stability of the closed-loop dithered system by establishing that of the closed-loop fuzzy relaxed system.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1163-1168
• /
• 2013

The maximum allowable value of loop impedance($Z_s$) to secure the operation of overcurrent protective devices and the safety for indirect contact is a very important in TN-C-S system. The loop impedance is divided into inner loop impedance which consumer can adjust and external loop impedance($Z_e$) which only electric operator can adjust. Thus, an external loop impedance which limits to less than a certain value is a very important factor for human body protection against electric shock in TN-C-S system. The concept of loop impedance($Z_s$) is recently introduced to the domestic, the study about external loop impedance is yet insufficient. However, the study about the reference impedance as specified by the IEC 60725 standard to improve the quality and reliability of the power supply is being made. In this paper, reference value of external loop impedance($Z_e$) to meet domestic environment will be proposed by the nationwide measurement and statistical analysis.

• 한국시스템다이내믹스연구
• /
• 제15권1호
• /
• pp.5-27
• /
• 2014

The purpose of this study is to analyze the school autonomy policy based on the system thinking perspective using causal loop diagrams. School autonomy was the main educational policy concerning school domain during the last government and was the instrument for school-based management, but it was not implemented effectively in site. The school autonomy policy practically disappeared as an explicit policy agenda in the current government. This study displays causal loop diagrams about the policy's logic and contents of school autonomy, in terms of curriculum, human resource management, and a supportive system. The causal loop diagrams depicting the implementation of the school autonomy policy are suggested concerning excessive enforcement and the confirmative mechanism for policy implementation. The conclusion provides some research implications and future directions.