• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.5-13
• /
• 2017

Noise complaints among neighbors in apartment building are mainly caused by floor impact noise that is structure born noise due to occupant induced floor vibration. To control this noise problems many researchers have investigated floor systems and finishing materials. Light-weight impact noise affects by finishing materials, but heavy-weight impact noise induced by heel impacts during normal walking or jumping of children is concerned with structural system and floor vibration. To figure out the characteristics of floor impact noise and transmission of floor vibration due to human activities, vibration tests were conducted in apartment buildings. Impact hammer, heel drop and walking activities were loaded at center of upstairs living room, and accelerations of slabs for both upstairs and downstairs and sound pressure levels for downstairs were measured. The acceleration ratio of transmitted floor vibration to downstairs and human induced vibration in upstairs was between 0.5 and 1.0 according to slab size, wall, and load type. And floor impact noise occurred in the range of natural frequency of slab.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.93-99
• /
• 2002

Ride comfort, one of the most important performances of a car, is affected by vibration, noise, dynamic movement, and ergonomic factors. Among these factors, ride comfort vibration is heavily affected by the seat system, tire, suspension, and body structure. In this study, vibration characteristics of seat, tire, suspension, and body structure are analyzed. The vibration transfer function from the road input to the human body is also investigated.

• 대한인간공학회지
• /
• 제32권4호
• /
• pp.293-295
• /
• 2013

Objective: The objective of this study is to examine the characteristics of the research on human vibration in Korea. Background: There have been relatively less interests in vibration than other ergonomic factors in Korea. However, the importance of vibration is increasing as industry and everyday life are more mechanized. Method: This study reports the results of the literature review on the papers about human vibration published in ergonomics-related domestic journals. Results: It was found that more studies have been done on local vibration than on whole body vibration. Diverse topics have been studied in ergonomics community. Conclusion: Further cutting-edge studies are expected than classical safety and health related ones. Application: Some suggestions were proposed hopefully helpful to colleague ergonomists for future research.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.458-461
• /
• 2008

The primary objective of this study is to provide simple analytical tools to estimate dynamic characteristics of steel framed floor system in hospital building for vibration serviceability due to human activities, bogie, medical equipment. and so on. In order to evaluate the dynamic characteristics and vibration levels according to steel framed floor system, we had executed impact test and measurement on steel structure floor system in various hospital buildings. But perhaps most importantly, how to make the most of deduced design factor for design of hospital building. therefore we presented the access method such as the three-dimensional F.E. numerical analysis on the basis of the design drawing, and the properties of all floors for estimation of vibration level in hospital building.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5689-5695
• /
• 2012

본 연구에서는 차량에 적용되는 시트 재질인 폴리우레탄 폼의 점탄성 특성을 고려하여 시트와 인체의 진동특성을 시험 및 수치해석 방법을 이용하여 분석하였다. 압축 시험을 통해 폴리우레탄 폼의 점탄성 특성인 비선형성과 준-정역학적 특성을 구하였다. 또한 컨벌루션 적분법 및 비선형 강성 모델을 이용하여 폴리우레탄 폼의 점탄성 특성을 수학적으로 모델링하였다. 시트의 승차감 기여도를 분석하기 위하여 시트의 동역학 모델과 ISO5982의 표준 인체 수직진동 모델을 이용하여 수직 진동모델을 구성하고 관련 운동방정식을 유도하였다. 비선형 운동방정식은 Runge-Kutta 적분법을 이용하여 수치해석 시뮬레이션을 수행하였다. 철도차량의 차체 바닥에서 측정한 진동가속도 입력에 대한 시트와 인체의 응답 특성을 분석하고 시트 설계 파라미터에 대한 승차감 지수 값들의 변화를 분석하여 시트 설계에 대한 방법론을 제시하고자 한다.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.194-202
• /
• 2015

본 연구에서는 수직 진동에 노출된 승객의 승차감을 정량적으로 분석하기 위해 점탄성 특성을 가진 시트에 기댄 인체의 동적 모델링을 제시한다. 시트 위 인체의 운동을 기술하기 위해 문헌에서 찾은 5자유도계 다물체 동역학 모델이 이용되었다. 철도차량 시트에 사용되는 점탄성 특성은 비선형 강성 특성과 시간 지연을 표현하는 컨볼루션 적분으로 수식화된다. 바닥 가진에 대한 전달함수를 분석 결과 시트의 비선형 특성으로 인해 입력 가진의 크기에 따라 전달함수는 변하는 것으로 나타났다. 측정된 철도차량의 바닥 가진을 이용하여 실제적인 인체 진동 특성을 분석한다. 주파수 가중치 자승평균치 값을 계산하고 시트 설계 파라미터가 이 주파수 가중치 자승평균치에 미치는 영향을 제시한다.

• 한국소음진동공학회논문집
• /
• 제13권8호
• /
• pp.645-650
• /
• 2003

This paper introduces attempts to obtain the 'representative'characteristics of the apparent mass (or dynamic mass) of seated Korean subjects under vertical vibration. Individual responses of driving-oint apparent masses obtained from forty one Korean subjects are illustrated. Four kinds of vibration levels and three different sitting postures are selected to collect the characteristic responses of each subject. Those individual responses are used to estimate the 'mean'apparent mass, which may be expected to be a representative model to Korean subjects. Several interesting features of the estimated apparent mass are suggested and compared to those of ISO 5982.

• 한국소음진동공학회논문집
• /
• 제13권3호
• /
• pp.186-193
• /
• 2003

Floor vibrations in residence and office buildings are typically induced by heel drop and walking movement of occupants. The criteria of most vibration provisions have been developed based on the vibration caused by heel drop impact rather than walking. There may be considerable differences between the vibration characteristics induced by walking and heel drop. The effect of walking vibration was not well reflected on current provisions. In this paper, shaking table test was performed to investigate the human perception level against the vibrations due to walking and heel drop. This study attempts to compare the human Perception level of two different vibration sources. Also, this study investigates the effect of damping on a Perception level under heel drop and walking vibration.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.179-186
• /
• 1999

This article aims to provide information necessary for the measurement and analysis of human vibration, especially hand-arm vibration. The major health problems associated with the use of powered hand tools are the signs and symptoms of peripheral vascular and peripheral neural disorders of the fingers and hands. To prevent these problems, it is the first and the most important to measure the amount of the vibration transmitted to the upper extremities, and analyze its characteristics against the exposure limits such as ISO standards. In our country, however, very few studies have been done on the hand-arm vibration. One of the possible reasons might be lack of knowledge for the measurement and analysis schemes. The information introduced in this article would hopefully be of help for the upcoming studies.

• Structural Engineering and Mechanics
• /
• 제43권5호
• /
• pp.607-621
• /
• 2012

The Expo Culture Centre is one of the permanent buildings at the World Expo 2010 in Shanghai, China. The main structure has an oval shape and consists of 36 radial cantilever steel trusses with different lengths and inner frames made of concrete-filled rectangular steel tube members. Tuned mass dampers are used to reduce the excessive vibrations of the sixth floor that are caused by human-induced resonance. A three-dimensional analytical model of the system is developed, and its main characteristics are established. A series of field tests are performed on the structure, and the test results show that the vertical vibration frequencies of most structural cantilevers are between 2.5 Hz and 3.5 Hz, which falls in the range of human-induced vibration. Twelve pairs of tuned mass dampers weighing 115 tons total were installed in the structure to suppress the vibration response of the system. These mass dampers were tuned to the vertical vibration frequency of the structure, which had the highest possibility of excitation. Test data obtained after the installation of the tuned mass dampers are used to evaluate their effectiveness for the reduction of the vibration acceleration. An analytical model of the structure is calibrated according to the measured dynamic characteristics. An analysis of the modified model is performed and the results show that when people walk normally, the structural vibration was low and the tuned mass dampers have no effect, but when people run at the structural vibration frequency, the tuned mass dampers can reduce the floor vibration acceleration by approximately 15%.