• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.666-671
• /
• 2003

Dental caries are the most commonly occurring chronic diseases in the dental field. Because of increasing sugar consumption and extension of average human life, these diseases are widely found all over the world as the most typical cause for a person to lose a tooth. Therefore, the development of more effective, substantial and safe preventive agents against dental caries is strongly required. Streptococcus mutans is known as the causative bacterial playing the most important role informing plaque and it is being noticed as major causative bacteria of dental caries. The present study was designed to investigate the effect of Asarum sieboldii Miquel(Aristolochiaceae) extracts on the growth, acid production, adhesion, and insoluble glucan synthesis of Streptococcus mutans(S. mutans). Both methanol and aqueous extracts showed concentration dependent inhibitory activity against the growth and acid production of S. mutans, and produced significant inhibition at the concentration of 100, 1,000 and 2,000 μg/ml compared to the control group(p<0.05 - p<0.01). The extracts markedly inhibited S. mutans adherence to HA treated with saliva, and cell adherence was repressed by more than 50% at the concentration of 10 μg/ml and complete inhibition was observed at the concentration of 2,000 μg/ml. On the activity of glucosyltransferase which synthesizes water insoluble glucan from sucrose, methanol and aqueous extracts showed more than 70% inhibition over the concentration of 1,000 μg/ml. Hence, we conclude that Asarum sieboldii might be a candidate of anticaries agent.

• Journal of Periodontal and Implant Science
• /
• v.27 no.4
• /
• pp.785-804
• /
• 1997

It was well known that calcium sulfate was biocompatible, resorbed rapidly in the body, had potential as a good barrier membrane. Platelet-derived growth factor(PDGF) was one of polypeptide growth factor that had been reported as a biological mediator which regulates activities of wound healing process including the cell proliferation, migration and metabolism. The purpose of this study was to evaluate the effects of a combination of calcium sulfate and PDGF on periodontal ligament cells in vitro to use as a regeneration promoting agent of periodontal tissue. Human periodontal ligament cells were prepared from the premolar tooth extracted for the orthodontic treatment. Cells were cultured in ${\alpha}-MEM$ contained with 20% FBS, at the $37^{\circ}C$, 100% of humidity, 5% $Co_2$ incubator. Cells were inoculated and cultured into 96 well culture plate with $1{\times}10^4cells/well$ of ${\alpha}-MEM$ for 1 day. After discarding the medium, those cells were cultured in ${\alpha}-MEM$ contained with 10% FBS alone(control group), in calcium sulfate(calcium sulfate group), in calcium sulfate treated with 15ng/ml of PDGF-BB(calcium sulfate+PDGF group), in ${\alpha}-MEM$ contained with 10% FBS treated with 15ng/ml of PDGF-BB(PDGF group) for 1, 2, 3 day respectively. And then each group was characterized by examining of the cell counting, MTT assay, collagen synthesis. The results were as follows. 1. In the analysis of cell proliferation by cell counting, both calcium sulfate group and calcium sulfate plus PDGF group showed no stastically significant difference compared to control group, but there was stastically significant difference between PDGF group and calcium sulfate group at 1, 2 day(P<0.05). 2. In the analysis of cell proliferation by MTT assay in calcium sulfate extracts, both calcium sulfate group and calcium sulfate plus PDGF group showed no stastically significant difference compared to control group, but there was stastically significant difference between PDGF group and calcium sulfate group at 2, 3 day, and between calcium sulfate plus PDGF group and calcium sulfate group at 2 day(P

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.511-519
• /
• 2008

Statement of problem: An incompatibility between the initiator systems of self-curing composite resins and light-curing adhesives was supposed recently. Purpose: The purpose of the study was to evaluate the influence of activators for self/dual bonding on dentin shear bonding strengths. Material and methods: Fifty human molars were divided into 5 groups. A flat dentin surface was created for each tooth. A self-curing composite resin (Luxacore) was bonded with the following adhesives (n = 10); One-Step, Prime&Bond NT, AdheSE, Prime&Bond NT and AdheSE were also used in combination with activators. Shear bond strengths were measured after 24 hours of water storage. The specimens were loaded in shear in the Instron until failure at a 1 mm/min crosshead speed. Data were compared using one-way ANOVA and Tukey HSD test (${\alpha}$= 0.05). Results: The dentin adhesive systems in order of decreasing median bond strength were One-Step > Prime&Bond NT with activator, AdheSE with activator > Prime&Bond NT, AdheSE. Among adhesives, One-Step had the highest bond strength. Prime&Bond NT with activator had higher bond strengths than Prime&Bond NT that was used alone, and so was AdheSE. Conclusion: Shear bond strengths were increased in Prime&Bond NT and AdheSE when these were used with activators comparing used without activators. But using activators was not effective clinically comparing One-Step.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.353-369
• /
• 2007

Gingival tissue samples were obtained during periodontal surgery or tooth extraction. According to the patient's systemic condition & clinical criteria of gingiva, each gingival sample was divided into three groups. Group 1 (n=8) is clinically healthy gingiva without bleeding and no evidence of bone resorption or periodontal pockets, obtained from systemically healthy 8 patients. Group 2 (n=8) is inflamed gingiva from patients with chronic periodontitis. Group 3 (n=8) is inflamed gingiva from patients with chronic periodontitis associated with type 2 diabetes. Tissue samples were prepared and analyzed by Western blotting. The quantification of $IL-1{\beta}$, MMP-13 and TIMP-1 were performed using a densitometer and statistically analyzed by one-way ANOVA followed by Tukey test. 1. The expressions of MMP-13 and TIMP-1 showed increasing tendency in group 2 & 3 compared to group 1. 2. The expressions of $IL-1{\beta}$ & MMP-13 were showed increasing tendency in group 3 compared to group 2. 3. As $IL-1{\beta}$ levels were increasing, MMP-13 showed increasing tendency in group 3, and although $IL-1{\beta}$ , MMP-13 levels were increasing, TIMP-1 levels were similar expressed comparing to group 2. In conclusion, this study demonstrated that the expression levels of MMP-13 and TIMP-1 had increasing tendency in inflamed tissue. It can be assumed that $IL-1{\beta}$ and MMP-13 may be partly involved in the progression of periodontal inflammation associated to type 2 DM.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.325-338
• /
• 2007

The purposes of this study were to compare and quantify the expression of IL-6, e1stase and ${\alpha}_1-PI$ in the gingival tissues of patients with type 2 diabetes mellitus and healthy adults with chronic periodontitis. Gingival tissue samples were obtained during periodontal surgery or tooth extraction. According to the patient's systemic condition & clinical criteria of gingiva, each gingival sample was devided into three groups. Group 1 (n=8) is clinically healthy gingiva without bleeding and no evidence of bone resorption or periodontal pockets, obtained from systemically healthy 8 patients. Group 2 (n=8) is inflammed gingiva from patients with chronic periodontitis. Group 3 (n=8) is inflammed gingiva from patients with chronic periodontitis associated with type 2 diabetes. Tissue samples were prepared and analyzed by Western blotting. The quantification of IL-6, elastase and ${\alpha}_1-PI$ were performed using a densitometer and statistically analyzed by one-way ANOVA followed by Tukey test. 1. The expression levels of IL-6 showed increasing tendency in group 2 and 3, and It was highest in group 3. 2. The expression of elastase showed increasing tendency in group 2 and 3, and It was highest in group 3. 3. The expression of ${\alpha}_1-PI$ showed increasing tendency in group 3 compared to group 1. 4. The ${\alpha}_1-PI$/elastase ratio was decreased in group 2 and 3 compared to group 1, especially most decreased in group 3. 5. As IL-6 levels were increasing, elastase showed increasing tendency in group 3, and although IL-6 and elastase levels were increasing, ${\alpha}_1-PI$ level in group 3 showed slightly increasing pattern comparing to group 1. In conclusion, this study demonstrated that the expression levels of IL-6 and elastase will be inflammatory markers of periodontal inflammed tissue and DM. The ${\alpha}_1-PI$/elastase ratio also may be important measuring inflmmatory factors in the progression of periodontal inflammation associated to type 2DM.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.632-640
• /
• 2002

The objective of the study was to apply the vibration technique to reduce the viscosity of bonding adhesives and thereby compare the bond strength and resin penetration into dentinal tubules achieved with those gained using the conventional technique. Eighty-eight noncarious extracted human permanent molar teeth were sectioned to remove the coronal enamel and were embedded in 1-inch PVC pipe with acrylic resin. The occlusal surfaces were placed so that the tooth and the embedding medium were at the same level to form one flat surface, and the samples were subsequently polished with silicon carbide abrasive papers. The samples were randomly assigned to 4 groups(n=22). On Group 1 and 2, Single Bond(3M-ESPE, St. Paul, USA) was used, and on Group 3 and 4, One-Step(Bisco Inc., Schaumburg, USA) was used, and each was applied according to its manufacturer's instructions. For Group 2 and Group 4, vibration was applied with ultrasonic scaler for 10 seconds, and the adhesive was light-cured for 10 seconds. Resin composite was condensed on to the prepared surface in two increments using a mold kit(Ultradent Products Inc., USA) and each was light-cured for 40 seconds. After 24 hours in tap water at room temperature the specimens were thermocycled, and shear bond strengths were measured with a universal testing machine(Instron 4465, Canton, USA). To investigate infiltration patterns of the adhesive materials, the surface of specimen was examined with scanning electron microscope. The results were as follows. 1. The shear bond strengths of vibration groups(Group 2, Group 4) were significantly greater than those of the non-vibration groups(Group 1, Group 3)(p<0.05). 2. The shear bond strengths of Single Bond and One-Step were not significantly different (p>0.05). 3. The vibration groups showed greater number of resin tags in tubules and lateral branches under SEM.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.955-974
• /
• 1998

The purpose of the present study was to seek bracket-adhesive combinations which have adequate bond strength with no enamel and bracket fracture. The shear bond strengths were measured, the sites of failure and the enamel damage were investigated and the peripheral sealing and adaptation between enamel surface, bonding adhesive and bracket were evaluated. 240 noncarious human premolars were divided into twenty four groups of ten teeth. Shear bond strengths of each group were determined in an universal testing machine after two days passed and the debonded specimens were inspected to determine the predominant bond failure sites. To evaluate peripheral sealing and adaption between enamel surface, adhesive and bracket, each specimen was cut longitudinally into two halves which included the midsection of the bracket, adhesive and enamel and exmined in scanning electron microscope. Six different types of brackets were bonded to the tooth with four different type of adhesives. Six different types of brackets were Image, Plastic, Crystaline, Fascination, Transcend 2000 and metal bracket and four different adhesives were No-mix, Light-Bond, OrthoLC and Superbond C&B. From this study, it may be concluded that (1) The mean shear bond strength varied from a high of 36.58 Kg (410.07 Kg/$cm^2$) with the Fascination-Light Bond combination group to a low of 8.93 Kg (75.51 Kg/$cm^2$) with theImage-OrthoLC combination group. When using OrthoLC as adhesive, the mean shear bond strength was significantly lower than that of other combination groups, (2) Regardless of adhesives, the mean shear bond strength of Fascination brackets was relatively high whereas Plastic and Image brackets had low shear bonding strength. The shear bond strength of Crystaline bracket and Transcend 2m was relatively equal to or lower than that of metal bracket, (3) There was a correlation between bond strength, enamel damage and bracket fracture. As the shear bond strength was increased, the rate of enamel damage and bracket fracture were increased, (4) The combination groups that use OrthoLC as adhesive were debonded in shear stress without enamel fracture and bracket fracture, whereas the combination groups that use Superbond C&B as adhesive experienced a relative high enamel fracture rate and bracket fracture rate, (5) Peripheral sealing and adaptation between enamel-adhesive-bracket were relatively good when using Light-Bond or No-mix as adhesive. Regardless of adhesives, adaptation between bracket-adhesive were relatively good in Ceramic brackets, (6) The combination groups which had adequate bonding strength with no enamel and bracket fracture were Crystaline-No mix, Crystaline-Light Bond, Crystaline-OrthoLC, metal-No mix, metal-Light Bond and metal-OrthoLC combination groups.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.595-603
• /
• 2005

Incomplete removal of bacteria contaminated dentin or enamel associated with caries is a potential problem in restorative dentistry Secondary or residual caries, pulpal inflammation and hypersensitivity may result from bacteria left after the initial preparation, especially if an adequate seal against microleakage is not obtained. A possible solution to eliminate residual bacteria left in a cavity preparation would be to treat the cavity with cavity disinfectant wash. But a potential problem with using a cavity disinfectant with dentin bonding agents could be their interference with the ability of the resin to bond to the tooth micromechanically. The purpose of this study was to evaluate the effect of 2% chlorhexidine containing cavity disinfectant ($Consepsis^{(R)}$) on shear bond strength and microleakage of dentin bonding agents, $Adper ^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond and $Adper^{TM}\;Prompt^{TM}\; L-Pop^{TM}$ Sixty and sixty sound human third molar teeth, respectively, were used for shear bond strength and microleakage test. For experimental group, cavity disinfectant was applied before dentin bonding agents, and was not applied for the control group. The result from the this study can be summarized as follows ; 1. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the shear bond strength of dentin bonding agents. 2. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the microleakage of dentin bonding agents.