• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.167-183
• /
• 1996

Human teeth vary widely in color. Practitioner and patients are concerned with preventing and correcting discolored or dark teeth to achieve and maintain stain-free, white teeth. Tooth brushing cannot alter tooth color but it can remove adhering films and stains. The esthetics of natural dentition can be improved by bleaching and this process can be applied to intrinsically and extrinsically stained teeth. The need for a brighter, more attractive smile has made rapid growth in the market for tooth whiteners. There is no doubt these products work as whiteners, at least on mild to moderate stains, but the safety of these products are unclear. In this experiment, the effect of tooth whitener application on the color and microhardness of extracted human enamel was measured. RMS, RMT and NWT were used as tooth whiteners, and tooth paste(ETQ) and hydrogen peroxide solution(HPO) were used as controls. 35 caries-free extracted human molars were embedded and polished with the exposed enamel diameter of 4 mm. The tooth whiteners and control agents were applied according to the manufacturers' instructions or clinically simulated procedures for eight weeks, and measurements were repeated every two weeks. Value(L＊) difference was measured using Differential Colorimeter(Model TC-6FX, Denshoku Co., Japan), and microhardness was measured using microhardness tester(Mitsuzawa Seiki Co., Japan). The results were as follows; 1. After application of agents for eight weeks, the Vickers hardness increased significantly in the ETQ, RMS and RMT application group(p〈0.01), and that decreased significantly in NWT application group(p〈0.01), but in HPO application group there was no significant change. The change in microhardness was greatest in NWT application group(p〈0.01). 2. After application of tooth whiteners and controls for eight weeks, the value change of toothpaste application group was significantly lower than those of other agents groups(p〈0.01), and there was no significant difference in value(L＊) change among tooth whitener groups(p〉0.01). 3. The application of tooth paste and paste type tooth whitener made gradual value change, but hydrogen peroxide gel type tooth whitener and hydrogen peroxide solution made rapid value change during initial application period.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.5
• /
• pp.438-443
• /
• 2004

Objectives : The proper development of the facial structures relies upon a sequence of tightly regulated signaling interactions between the ectoderm and mesoderm involving the participation of several families of signaling molecules. Among these, bone morphogenetic proteins (BMPs) have been suggested to be a key signal that regulates the development of the mandible and the initiation and morphogenesis of the teeth. The aim of this study was to examine the artificial development of the mandibular structures and to examine the role of BMPs on tooth morphogenesis and differentiation using an organ culture system. Materials and Methods : The tooth germs from Ed 11.5, 13.5 mice were dissected, and transplanted into the diastema of the mandible primordia. The mandibles containing the transplanted tooth germs were cultured in vitro. During this period, beads soaked with BMP4 were implanted around the transplanted tooth germs. In addition, a diastema block containing the transplanted tooth germ was dissected, then transferred to an adult mouse kidney. After the organ culture, the developing mandibular explant was removed from the kidney and prepared for the tissue specimens. Odontogeneis of the transplanted tooth germs was examined after Hematoxylin-eosin, Masson-trichrome staining. Results : Proliferation and differentiation of the tooth germs cultured in the diastema was observed. In the BMP4-treated tooth germs, the formation of the first and second molars was noted. The crown of the developing tooth showed the formation of a mature cusp with the deposition of enamel and dentin matrix. In conclusion, it was confirmed that BMP4 is involved in the formation of a dental crown and the differentiation of ameloblasts and odontoblasts of the molar tooth during the development of the transplanted tooth germs.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.4
• /
• pp.269-278
• /
• 2021

Objectives: The purpose of this animal research was to compare bone regeneration in augmented rabbit maxillary sinuses treated with demineralized particulate human-tooth graft and anorganic bovine bone by immunohistochemical analysis. Materials and Methods: Piezoelectric bilateral sinus augmentation was performed in eight adult rabbits. In the control group, anorganic bovine was grafted in the maxillary sinus following elevation of the sinus membrane. In the experimental group, demineralized human particulate tooth bone was grafted in the sinus. Bone regeneration in augmented sinuses was evaluated by immunohistochemical analysis using various markers of osteoprogenitor cells. Results: The number of bromodeoxyuridine-labeled cells was significantly higher in the experimental group than in the control group at eight weeks. The immunoreactivity of proliferating-cell nuclear antigen was increased slightly in the experimental group relative to the control group at eight weeks. Other bone markers were expressed equally in the two groups. Conclusion: In the rabbit maxillary sinus, higher osteoinduction was correlated with demineralized human particulate tooth bone grafting than with anorganic bovine grafting.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.25 no.4
• /
• pp.311-323
• /
• 1999

The osteonectin is a sort of glycoprotein which is secreted in human tissues. The osteonectin is generally detected in number of normal or neoplastic human tissues in vivo, but hasn't been studied the role of osteonectin in developing human teeth and odontogenic tumors. We evaluated degree of the expression of osteonectin immunohistochemically in 20 cases of developing tooth germ which growth from fetus 5 to 38 weeks, and total 51 odontogenic tumors whitch has taken from routine biopsy, such as 10 ameloblastomas, 5 cases of adenomatoid odontogenic tumors and odontomas and odontogenic fibromas, 4 cases of cementomas and calcifying epithelial odontogenic cyst and odontogenic keratocyst and dentigerous cysts and periapical cysts, and 3 cases of ameloblastic fibromas and myxomas. The results were as follows: 1. The osteonectin on the bud stage of tooth germ was strongly expressed in the epithelial dental lamina and in the outer dental epithelium on the early bell stage, and also strongly expressed in the inner dental epithelium on the late bell stage of tooth germs. 2. In ameloblastoma, the osteonectin was strongly expressed in the epithelial tumor component and especially in the acanthomatous types. 3. In both of calcifying epithelial odontogenic tumor and adenomatoid odontogenic tumors, the osteonectin was moderately expressed on the duct like spindle cells and epithelial tumor cells around calcification areas. 4. In odontogenic tumors originated from epithelial-mesenchymal tissues, the osteonectin was moderately expressed on the epithelial tumor components and in odontogenic cysts, it was expressed in ghost cells and calcification areas only. These were summaried the osteonectin may be strongly related to the developing tooth germ and odontogenic tumors and could be regulated hard tissue of human tooth in morphogenesis and involved with calcification mechanism in development odontogenic tumors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.383-399
• /
• 1998

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is a need to establish a standard timetable on early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. The results are as follows: 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. Cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2020

PURPOSE. To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent teeth. MATERIALS AND METHODS. A mandibular left first molar (#36) with adjacent human teeth (mandibular left second premolar: #35, mandibular left second molar: #37) and antagonistic human teeth (maxillary left second premolar: #25, maxillary left first molar: #26, maxillary left second molar: #27) was prepared simulating a section of the jaw. Samples were made with extracted human molars (Reference), crowned implants (Implant), or crowned resin tooth analogues (Tooth). Crowns (tooth #36; n = 16/material) were milled from lithium-disilicate (Li, IPS e.max CAD) or 3Y-TZP zirconia (Zr, IPS e.max ZirCAD, both Ivoclar Vivadent). Thermal cycling and mechanical loading (TCML) in the chewing simulator were applied simulating 15 years of clinical service. Wear traces were analyzed (frequency [n], depth [㎛]) and evaluated using scanning electron pictures. Wear results were compared by one-way-ANOVA and post-hoc-Bonferroni (α = 0.05). RESULTS. After TCML, no visible wear traces were found on Zr. Li showed more wear traces (n = 30-31) than the reference (n = 21). Antagonistic teeth #26 showed more wear traces in contact to both ceramics (n = 27-29) than to the reference (n = 21). Strong wear traces (> 350 ㎛) on antagonists and their adjacent teeth were found only in crowned groups. Abutment type influenced number and depth of wear facets on the antagonistic and adjacent teeth. CONCLUSION. The clinically relevant model with human antagonistic and adjacent teeth allowed for a limited comparison of the wear situation. The total number of wear traces and strong wear on crowns, antagonistic and adjacent teeth were influenced by crown material.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.3
• /
• pp.186-192
• /
• 2004

Purpose: Human tooth proteins are highly heterogeneous, comprising diverse proteins derived from a number of genes. The attempts to identify protein for activity of tooth matrix proteins have been defied by several factors. First, the amount of proteins within teeth is very small relative to many extracellular matrix proteins of other tissues. Second, the bioassay system is tedious and needed for long time. Therefore we tried to find easy techniques, which increase the product rate, and an assay of small proteins, with which amino acid sequence is possible without additional procedures. Materials and Methods: Total protein were extracted from 300 g enamel removed teeth and 600 g teeth with 4 mol/L guanidine HCl and purified by gel chromatography. Aliquot of proteins was implanted into muscle pouches in Sprague-Dawley rats for bioassay. By SDS-PAGE and membrane blotting, molecular weight of each protein was estimated and a partial amino acid sequence was obtained. Each fraction blotted on the membrane was cut out and inserted in rat ectopic model. Results: In dissociative method, total tooth proteins were obtained 1mg/ml from enamel removed teeth and 3.5 mg/ml from teeth. In SDS-PAGE, four clear bands at the sites corresponding to 66, 40, 20 and 18 kD. Especially The 66 kD band was clearly exhibited. Amino acid sequencing from tooth could be possible using PVDF membrane blotting technique. In amino acid sequencing, 66 kD protein was identified as albumin. Conclusion: Compared with conventional method for extraction of teeth protein and bioassay of proteins, the methods in this study were easy, time-saving and more productive technique. The matured tooth proteins omitting additional procedure of mechanical removal of enamel were simply analyzed using blotted PVDF membrane. This method seems to make a contribution as a technique for bioassay and amino acid sequencing of protein.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.3
• /
• pp.287-293
• /
• 2011

The enamel, the upper layer of a tooth has remarkable capability of bearing severe loading on the tooth. The fracture behavior is important to understand the mechanism of load bearing and it could be very useful for developing new materials. Non-destructive evaluation of such materials will also benefit from this knowledge. The graded microstructures of enamel were modeled by finite element analysis software and the J-integrals and the stress intensity factors were evaluated as the fracture parameters. The results show that these parameters are location dependent. Those values increase when measured in the direction of dentine enamel junction. This finding matched well with experiments and implies many useful understanding of biomaterials and applications to new materials.

• Journal of the Korean Magnetic Resonance Society
• /
• v.8 no.1
• /
• pp.37-46
• /
• 2004

When human tooth enamel is exposed to the X-ray or ${\gamma}$-rays, free radicals and defects are created in a small quantity of carbonate enclosed in the tooth enamel. The intensity of the ESR signal of the free radicals is almost proportional to the absorbed radiation dose. However this dosimetric character is affected to some extent with the measurement temperature and thermal treatment of the samples. We found that the shape of the ESR signals of the samples is dependent upon the measurement temperature, the thermal annealing prior to the irradiation and that after the irradiation.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.95-108
• /
• 1982

The purpose of this study was to analyze the growth and development of tooth germ and dental arch related to the bone growth during the fetal period. From 70 maxillae and 61 mandibles of the fetus aged 5, 6, 7, 8, 9 and 10 months, X-ray films were taken and measured. The results were as follows; 1. There was remarkable bone growth in the anterior and posterior area of palatum osseum, that were the intetior portion of both deciduous canines anteriorly and the intero-posterior portion of both deciduous second molars posteriorly, where there was active bone growth and radiate formation of bony trabeculae was found. 2. The Growth of anterior tooth germ was greater than that of posterior tooth germ, so anterior tooth germs were crowded. Especially in maxilla, the tooth germs of deciduous lateral incisors were located inside of dental arch and the tooth germs of deciduous canines were located outside of dental arch. 3. Crowding amount increased with the fetal age because the growth of tooth germs was greater than that of jaw bone. 4. In the growth of upper dental arch, the increase of width was greater than that of length. 5. There was proportional relationship between the area of Palatal Trapezoid and the fetal age.