• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.302-311
• /
• 2008

There have been repetitive landslides and debris flows on natural terrain induced by intensive rainfalls which have never been experienced during the last a few decades in Korea. Frequencies and magnitudes of landslides and debris flows are steeply increased after 2000 resulting in huge damages of human beings and facilities. According to a statistical data from NEMA, the human deaths induced by landslides and slope hazards occupies 22.3% of the total human deaths by all the natural hazards in Korea during the last 30 years. Among the human deaths by landslides and slope hazards, 85% of the damages were caused by landslides and debris flows on natural hazards. Therefore, this paper summarizes important events of landslides and debris flows, their characteristics, and suggests some methods of damage mitigation.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.47-53
• /
• 2014

The application of advanced Main Control Room(MCR) is accompanied with lots of changes and different forms and features through the virtue of new digital technologies. The characteristics of these digital technologies and devices give many opportunities to the interface management, and can be integrated into a compact single workstation in advanced MCR so that workers can operate the plant with minimum physical burden under any operation conditions. However, these devices may introduce new types of human errors and thus a means to evaluate and prevent such errors is needed, especially those related to characteristics of digital devices. This paper reviewed the new type of human error hazards of tasks based on digital devices and surveyed researches on physiological assessment related to human error. An experiment was performed to verify human error hazards by physiological responses such as EEG which was measured to evaluate the cognitive workload of operators. And also, the performances of four tasks which are representative in human error hazard tasks based on digital devices were compared. Response time, ${\beta}$ power spectrum rate of each task by EEG, and mental workload by NASA-TLX were evaluated. In the results of the experiment, the rate of the ${\beta}$ power was increased in the task 1 and task 4 which are searching and navigating task and memory task of hierarchical information, respectively. In case of the mental workload, in most of evaluation items, task 1 and 4 were highly rated comparatively. In this paper, human error hazards might be identified by highly cognitive workload. Conclusively, it was concluded that the predictive method which is utilized in this paper and an experimental verification can be used to ensure the safety when applying the digital devices in Nuclear Power Plants (NPPs).

• Journal of the Korean Society of Safety
• /
• v.5 no.1
• /
• pp.57-66
• /
• 1990

The purpose of this study is to investigate electrostatic charge condition and possibility of electrostatic hazards in case of putting on synthetic smocks and antistatic garments for the purpose of prevention of electrostatic hazards due to a human body electrical charge. It is shown in case of a synthetic smocks, electrostatic voltage by friction is about 2,900 (V), half life period is 12 second, and electrostatic charge is 1.4―1.8 ($\mu$ C). When putting on a synthetic smocks, electrostatic voltage is 2,500―2,800(V). When putting on a jumper of chemical fiber, electrostatic voltage is 8,000(V) . It is, therfore, possible to cause a electrostatic hazards. It is also shown in case of a antistatic garments, electrostatic voltage by friction is 87(V) ―280(V) (washing 90 times), half life period is 3―5 second, and electrostatic charge is 0.24―0.28($\mu$ C) which is much lower than 0.6($\mu$ C) limitation of fire and explosion occurance. When putting on a antistatic garments, electrostatic voltage is 10(V) ―125(V). In conclusion, it is shown when putting on a antistatic garments it is possible to prevent a electrostatic hazards such as fire or explosion due to human body, to prevent a destruction of semiconductor elements and capacity decline, and to prevent a misoperation of automation facilities and semiconductor electric and electronic products.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.321-327
• /
• 2002

There has been an increase in the public concern about possible health risks by electromagnetic exposure from mobile phones. Recently, increase in the use among young children of portable telephones public concern regarding potential health hazards due to a hot spot appearing inside the infant head, has been growing. Since the biological hazards due to RF exposure are caused mainly by a temperature-rise in tissue, the effect of localized SAR for portable telephones should also be related to the temperature-rise in the human head. In this paper, it was measured that in the actual use of portable telephone the temperature of the local tissue in the human-head change. As a result, it should be noted that the mean temperature of human-body and localized tissue is rising from beginning call. However the temperature variation of localized tissue is recovered rapidly as normal temperature, although the mean temperature of human-body rising continuously at ending call of portable telephone.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.79-84
• /
• 2014

Human error is one of the major contributors to the accidents. A lot of risk assessment techniques have been developed for prevention of accidents. Nevertheless, most of them were interested in physical factors, because quantitative evaluation of human errors was difficult quantitatively. According to lack of risk assessment techniques about human errors, most of industrial risk assessment for human errors were based on data of accident analysis. In order to develop an effective countermeasure to reduce the risk caused by human errors, a systematic analysis is needed. Generally, risk assessment system is composed of 5 step(classification of work activity, identification of hazards, risk estimation, evaluation and improvement). This study aimed to develop a risk identification technique for human errors that could mainly be applied to industrial fields. In this study, Ergo-HAZOP and Comprehensive Human Error Analysis Technique were used for developing the risk identification technique. In the proposed risk identification technique, Ergo-HAZOP was used for broad-brush risk identification. More critical risks were analysed by Comprehensive Human Error Analysis Technique. In order to verify applicability, the proposed risk identification technique was applied to the work of pile head cutting. As a consequence, extensive hazards were identified and fundamental countermeasures were established. It is expected that much attention would be paid to prevent accidents by human error in industrial fields since safety personnel can easily fint out hazards of human factors if utilizing the proposed risk identification technique.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.62-68
• /
• 2000

Static electricity in electronics manufacturing plants causes the economic loss, yet it is one of the least understood and least recognized effects haunting the industry today. Today's challenge in semiconductor devices is to achieve greater functional density pattern and to miniaturize electronic systems of being more fragile by electrostatic discharges(ESD) phenomena. As the use of automatic handling equipment for static-sensitive semiconductor components is rapidly increased, most manufacturers need to be more alert to the problem of ESD. One of the most common causes of electrostatic damage is the direct transfer of electrostatic charge from the human body or a charged material to the static-sensitive devices. To evaluate the ESD hazards by charged human body and devices, in this paper, characteristics of electrostatic attenuation in domestic semiconductor devices is investigated and the voltage to cause electronic component failures is investigated by field-induced charged device model(FCDM) tester. The FCDM simulator provides a fast and inexpensive test that faithfully represents ESD hazards in plants. Also the results obtained in this paper can be used for the prevention of semiconductor failure from ESD hazards.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.285-293
• /
• 2015

Objectives: This study was conducted in order to ascertain the important factors for SMEs in managing the risks of chemicals and to suggest a government role in strengthening the responsibility of small and medium enterprises(SMEs) as employers. Methods: About 100 enterprises were surveyed in Incheon. A questionnaire for employers and walk-through surveys by occupational hygienists were performed at each enterprise. Results: The results showed that most employers thought chemicals were not hazardous but chemical management was needed. When employers determine how to manage chemicals, they rely heavily on personal experience and rather less on information from the government or experts. However, if employers think the chemicals are hazardous, they do more to manage the chemicals. Conclusions: When employers think chemicals are hazardous, risk assessment would be an effective tool to control chemical hazards in SMEs. Employers' position on chemical hazards is very important. Since the government is the initiator, it is the government who develops messages for SMEs, such as "Chemicals are hazardous and management can reduce the risk of chemicals." Governmental messages can play an invaluable role in strengthening the responsibility of SME employers to manage chemical hazards.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.4.1-4.7
• /
• 2015

Objectives Approximately 2000 phase-in substances are subject to registration according to the Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH), and the expected testing cost is 2.06 trillion Korean won assuming all the test data required for registration are acquired. The extent to which these enormous test costs can be reduced depends on the availability of existing data that can be used to meet the requirements of the K-REACH we examined the current availability of test data that can be used for chemical substance registration. Methods We analyzed the possibility of utilizing the existing test data obtained from 16 reference databases for 369 of 518 kinds of phase-in substances subject to registration that were reported in last October 2014. Results The physical and chemical properties were available for 57.1% of substances, whereas data regarding human hazards and environmental hazards were available at considerably lower rates, 8.5% and 11.8%, respectively. Conclusions Physical and chemical properties were available for a fairly high proportion, whereas human hazards and environmental hazards were reported for considerably fewer substances.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.109-121
• /
• 2012

Human responses, such as construction of levees, are a spatial representation of the place vulnerability which is induced by a geomorphic hazard like flooding. Human responses include all forms of human activities to reduce the place vulnerability and they seem to be related with reducing vulnerability rather than reducing geomorphic hazards. Diverse human responses to the perceived environment bring about changes in the place vulnerability. People respond spatially to their vulnerability of the place in diverse ways from their experience and perceived risk. Human responses have quantitative possibilities in predicting and modeling the place vulnerability. Building the model of a dynamic place vulnerability to the diverse geomorphic hazards requires basic maps of geomorphic processes and human responses in the region.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.160-167
• /
• 2000

This paper addresses issues encountered in using the ISO and national standard codes to assess the hazards of whole-body vibration and repeat shocks. Their assessment methods are given in ISO 2631-1 (1974, 1985, 1997) and BS 6841 (1987) that are now available to us. Two standard codes can yield unfortunately different assessment results even for a single measured vibration signal. Possible reasons for such different results are pointed out and, furthermore, related questions that should be re-examined in the future are raised in this paper.