• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.219-219
• /
• 2008

Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for ubiquitous sensor networks (USN). There are several power generating methods such as thermal gradients, solar cell, energy produced by human action, mechanical vibration energy, and so on. Most of all, mechanical vibration is easily accessible and has no limitation of weather and environment of outdoor or indoor. In particular, the piezoelectric energy harvesting from ambient vibration sources has attracted attention because it has a relative high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system hassome drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure. In this case, the energy harvester has a lower natural frequency under 200 Hz than a normal cantilever structure. Moreover, it has higher an energy conversion efficient because shear mode ($d_{15}$) is much larger than 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate as a standalone power generator for USN.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.262-269
• /
• 2010

Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.51-72
• /
• 1998

Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.

• Korean Journal of Social Welfare
• /
• v.59 no.2
• /
• pp.115-142
• /
• 2007

This study aimed to explore social work practice tasks and KSA(Knowledge, Skill, Ability) that are being used most frequently in practice field so that developing contents of training program for social worker. The participants in this study included 340 social worker in community welfare center nationwide and exploratory statistical methods were used. The specific result were as follows: 1.social work service was classified four dimensions(direct service, community service, organizational strategic and human resource management, and indirect service). 2.In each dimension, important practice tasks were screened. 3.Basic KSA of social worker that were needed to perform these tasks successfully were screened. On basis of these results, this paper provided some practical strategics for developing training program.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.61-68
• /
• 2000

This paper illustrates what the reality of architectural concepts, materials, notions and phenomena are as central questions of contemporay space design. These issues form the goal of modern space design which should attain to the reality of an era when non-real values prevail. Despite the trends of an everchanging and ephemeral dominating quality in architecture for the last ten years, architects still aim to contruct everlasting space on earth. The trends of dematerialization in today's space design can be substantiated in spatial-temporal dimensions as follows. First of all, ephemeral architecture with concepts of hypothetical temporality, everchanging architecture in fluidity, and the transparent architecture with the floating and overlapping image can be analyzed in the dimension of 'time'. In terms of 'space', void quality for the expression of emptiness, neutral space by the simplified and summarized forms, expanded space through ambiguous boundaries and spatial repetition can becharacterized and also be intended strategies for lightness, state of flux, ambiguity, paradox etc., lead modern space design along that path. As this point, we need to pay attention to the so-called 'hypersurface' concept proposed by Stephen Perella. Hypersurface is a sort of cladding sheathing existence independent from the primary structure. With it, the integration between form and image can be achieved. Sometimes hypersurface can be a strategical screen for image projection, a cognitive receptor for surroundings as well as a catalyst for information and communication systems. When the situation dematerializes more and more as the years go on, the concept of hypersurface can be an inclusive method between the phenomenological form in architecture and its self recipient image. Permissive atmospheres created between them in contemporary space design and new paradigms emerged with digital technology will further reinforce the human space's dynamism.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.4 no.1
• /
• pp.95-106
• /
• 1998

This study aims to provide a better nursing service in the dimension of economizing time and human efforts. This is to present some basic knowledge necessary to improving a nursing quality in measuring body temperature by analyzing the contents that the objects experienced at the time of measure with tympanic thermometer and mercury thermometer Subjects of the survey consisted of 71 college students, 47 adult patients and 40 pediatric patients. The results were as follows : 1. The oral temperature by mercury thermometer and tympanic thermometer with oral mode was : $36.83^{\circ}C$ by mercury thermometer and $37.02^{\circ}C$ by tympanic thermometer in college students : it showed an significant difference statistically. 2. Comparsion between oral mode and rectal mode by tympanic thermometer in college students : $37.03^{\circ}C$ by oral mode and $37.55^{\circ}C$ by rectal mode and this defference was significant statistically 3. Comparision between rectal temperature by mercury thermometer and rectal mode of tympanic thermometer : $37.54^{\circ}C$ by mercury thermometer and $37.73^{\circ}C$ by tympanic thermometer, it showed a significant difference statistically. 4. Comparision between oral temperature by mercury thermometer and oral mode of tympanic thermometer of the pediatric patients : $36.51^{\circ}C$ by mercury temperature and $36.94^{\circ}C$ by tympanic thermometer, it showed a significant difference statistically. 5. Comparision between oral body temperature by mercury thermometer and oral mode of tympanic thermometer of the adult patients : $36.56^{\circ}C$ by mercury thermometer and $36.90^{\circ}C$ by tympanic thermometer, it did not show statistically any difference. 6. At the measure by mercury thermometer this data can classified In three main categorise : their feeling to a thermometer, thermometer itself and aspect physical of the clients. It is considered that an subjective experience to tympanic thermometer was more positive.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.488-493
• /
• 2011

The Korean spine geometry and property data for researchers were made by KISTI and Catholic Institute for Applied Anatomy. We took whole spine CT, X-Ray, BMD scan for making high resolution cross-sectional spine images using more 20 donated cadavers(60 - 80 years). Then we constructed 3-dimensional volume model using serial CT images by Mimics software. The major morphometric parameters of vertebrae were measured. Mechanical motion and property data were obtained by the same cadavers using the DEXA for BMD and the spine simulator. The Korean spine geometry and property data could be used for research and development of medical device.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

Beginning in 1990's, 3D filmmaking reappeared. As almost every job in filmmaking is digitalized, 3D takes advantage of its new software and hardware, and digital friendly customers as well. One reason why Korean cinema should take 3D seriously is that it can resolve the old and tough problem of unemployed human resources in film production. Another reason is the cooperation programs in which universities and 3D companies can join. 3D cinema can create new cinema goers who don't belong the regular viewer. The totally new experience of 3D can bring people to the movie theaters, and this will add up the total movie customers that expand the whole film industry. The newly designed 3D also could take care of piracy of movie file uploading and downloading through internet. 3D cinema would be precious alternative for film industries of Korea.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.87-97
• /
• 2009

A technology in development called CACD (Computer Aided Clothing Design) can reproduce fashion shows by utilizing computers, and is of particular interest. Considering the growth potential of this area, the purpose of this study is to present the development potentials that CACD technology will bring to the fashion area and to promote the diversity of the fashion industry. This will be realized by identifying the current status of CACD and its reach in the field of Fashion, followed by an in-depth analysis of its application. The methodologies employed in this study are as follows; in-depth study of related literature, field research of business firms, and investigation on Internet data. For the systematic advance of CACD, the development of user-friendly programs for 3D clothing design is of the utmost priority. The four technologies that should be intensively developed to enhance the development of the clothing industry through the utilization and commercialization of CACD are as follows; First, technology capable of performing accurate three-dimension measurement of the human body is needed. Second, technology which realizes automatic pattern formation is needed. Third, the nature physical properties of the material and textile design when applied to pre-formed patterns must be expressed similarly to the real thing. Last of all, an integrative technology which can conduct fast and accurate clothing simulations must be developed.

• Proceedings of the Korean Society for the Gifted Conference
• /
• 2003.05a
• /
• pp.137-138
• /
• 2003

Understanding how and why people differ is a fundamental, if distant, goal of research efforts to bridge psychological and biological levels of analysis. General fluid intelligence (gF) is a major dimension of individual differences and refers to reasoning and novel problemsolving ability. A conceptual integration of evidence from cognitive (behavioral) and anatomical studies suggeststhat gF should covary with both task performance and neural activity in specific brain systems when specific cognitive demands are present, with the neural activity mediating the relation between gF and performance. Direct investigation of this possibility will be a critical step toward a mechanistic model of human intelligence. In turn, a mechanistic model might suggest ways to enhance gF through targeted behavioral or neurobiological intervent ions, We formed two different groups as subjects based on their scholarly attainments. Each group consists of 20 volunteers(aged 16-17 years, right-handed males) from the National Gifted School and a local high school respectively. To test whether individual differences in general intelligence are mediated at a neural level, we first assessed intellectual characteristics in 40 subjects using standard intelligence tests (Raven's Advanced Progressive Matrices, Wechsler Adult Intelligence Scale, Torrance Tests of Creative Thinking) administered outside of the MR scanner. We then used functional magnetic resonance imaging (fMRl) to measure task-related brain activity as participants performed three different kinds of computerized reasoning tasks that were intended to activate the relevant neural systems. To examine the difference of neural activity according to discrepancy in general intelligence, we compared the brain activity of both extreme groups (each, n=10) of the participants based on the standard intelligence test scores. In contrast to the common expectation, there was no significant difference of brain region involved in high-g tasks between both groups. Random effect analysis exhibited that lateral prefrontal, anterior cingulate and parietal cortex are associated with gF. Despite very different task contents in the three high-g-low-g contrasts, recruitment of multiple regions is markedly similar in each case, However, on the task with high 9F correlations, the Prodigy group, (intelligence rank: >99%) showed higher task-related neural activity in several brain regions. These results suggest that the relationship between gF and brain activity should be stronger under high-g conditions than low-g conditions.