• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.47-53
• /
• 2005

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형자유수면경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상방향패널이동법을 사용하였고, 선체에 미치는 전저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 선형인 Wigley선형과 Series 60(C${_B}$=0.6)hull 선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.64-69
• /
• 2004

In recent years, Medium size high speed Ro-Pax vessel has appeared at European sea and especially Agean sea is a center of operating in this type of Ro-Pax. This vessel operates its high Froude number range and requires higher engine power due to considerably increased resistance in comparing to large Ro-Pax in high speed range. SHI has investigated this kind of high speed Ro-Pax in accordance with market requirements and developed more advanced vessel to meet the future market needs. Process of hull form development, model test results and design of general arrangement results are introduced in this paper.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.491-497
• /
• 2012

A hull-form for a 32,000G/T class Ro-Pax ferry has developed in accordance with a need of ferry operators to reduce fuel oil consumption(FOC) due to the drastic increase in oil prices recently and strengthening of environmental rules and regulations such as CO2 emission. A twin-skeg type is applied as the hull-form in lieu of an open-shaft type in order to improve propulsion performance. In order to achieve this object, flow control devices are installed to reduce a propeller induced vibration which is a main reason to obstruct the application of twin-skeg type passenger vessels owing to an uncomfortable vibration level. Numerical simulation by using an in-house code and a commercial code (Fluent) has performed to find out an optimum design of the flow control devices and to check an improvement in cavity volume. Model tests in Samsung Ship Model Basin are carried out to evaluate propulsion performance with the developed twin-skeg type hull and a reference hull of open-shaft type. In conclusion, it is shown that the twin-skeg type hull is better than the open-shaft in FOC by around 7% and in cavity volume by 20% as well.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.1-10
• /
• 2003

It is important to understand the flow characteristics such as wave and wake development around a ship for the design of the hull forms with better resistance and propulsive performance. The experimental results explicating the local flow characteristics are also invaluable for validation of the physical and numerical modeling of CFD codes, which are recently gaining acknowledgements as efficient tools for hull form evaluation This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138K LNG Carrier (KLNG) model with propeller and rudder. The results contained in this paper can provide the valuable information on the effect of propeller and rudder on stern flow characteristics of the modern commercial hull form, furthermore, the present experimental data will provide important database for CFO validation.

• Journal of Ship and Ocean Technology
• /
• 제4권3호
• /
• pp.33-45
• /
• 2000

A computational system for wave and viscous flow analysis (WAVIS) has been developed. The system includes a pre-processor, flow solvers and a post-processor. The pre-processor is composed of full form presentation, surface mesh and field grid generation. The flow solvers are for potential and viscous flow calculation. The post-processor has graphic utility for result analysis. All the programs are integrated in a GUI-launcher package. To validate the developed CFD programs of WAVIS, the calculated results for modern commercial hull forms are compared with measurements. It is found that the results from WAVIS are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.564-571
• /
• 2007

In the present study, stern form optimization has been carried out using computational fluid dynamics (CFD) techniques. The viscous pressure drag has been minimized to optimize stern shape. Parametric modification function has been used to modify the shape of the hull. By the use of the parametric modification function and algebraic scheme to grid manipulation, the initial ship geometry was easily deformed according to change of design parameters. For purpose of illustration, KRISO 319K VLCC (KVLCC) is chosen for example ship to demonstrate stern form optimization. The numerical results indicate that the optimized hull yields a reduction in viscous resistance.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.152-157
• /
• 2009

In designing and manufacturing a submarine, an expensive real mock up is usually built as a reference because of the spatial constraints of a submarine. This paper presents an integrated and automated design process for a submarine that uses a digital mock up. Various equipment libraries are built for feature based design. Using the developed digital mock up, this paper shows various ways to verify the design, including a space analysis to check for any interference between pieces of equipment and the hull and an ergonomic analysis using lifelike dummies to examine the work space and operability. As a part of the integrated design system, a design automation system was also developed to generate surface point data for the outer hull, pressure hull, casing, and sail. The whole process was applied to the design of a submarine for verification.

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.869-875
• /
• 2006

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형 자유수면 경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상 방향 패널이동법을 사용하였고, 선체에 미치는 전 저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 건형인 Wigley선형과 Series 60(CB=0.6)선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.1-11
• /
• 1991

$C_B{\simeq}0.8,\;L/B{\simeq}5.5,\;B/d{\simeq}3.5$의 선형치수비를 특징으로 갖는 AFRAMAX형 유조선에 복합선미 선형 개념을 적용하여 선형개발을 수행하였고, 종래 유조선에 비해 매우 우수한 선형이 모형시험을 통하여 확인됨으로써 복합선미선형 개념이 비교적 광폭천흘수(廣幅淺吃水) 특성을 갖는 선형의 경우에 더욱 유력한 것임이 입증되었으며, 이러한 치수비의 선형에 적합한 늑골선의 형태도 찾을 수 있었다. 또한 본 연구에서는 일본의 'H사'에서 '90년에 개발한 동급선형을 선택하여 이론계산 및 한국해사 기술연구소에서의 도형시험에 의한 선형특성 및 성능의 비교를 수행하였으며, 그 결과 대우 선형은 종래의 "Moderate U형" 선미형상을 특징으로 하는 'H사'의 선형에 비하여 점성저항은 매우 작으면서도(형상계수 k가 0.30에서 0.75로 감소) 추진효율은 그다지 나쁘지 않아서, 만재상태나 경하상태에서 유효마력은 약10%, 전달마력은 5-6% 작은 것이 확인되었고 이론계산 결과도 이런 경향을 잘 설명해 줌을 알았다. 부수적으로, 형상계수가 통상의 것보다 매우 작은 경우에는 Froude방법 및 종래의 통계에 의한 상관 수정계수에 의한 저항시험결과의 실선화장은 실선저항을 지나치게 낮게 예측해줄 위험성이 있으므로 ITTC '78방법과 같은 형상계수의 도입이 보다 바람직한 것임을 확인하였다.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.71-76
• /
• 2004

A Study of the traditional Korean fishing boat is based on a report on an investigation of the Korean fishing boats, conducted in 1921. The report was completed in 1927 with the conclusion of the Southern Sea region and West Sea region studies, which included the investigation oj the entire region. It was a very thorough and scientific investigation of Korean fishing boats, which has been published in three volumes. Based on this report, this paper surveys the characteristics and the hull form of the traditional Korean fishing boats. As a result, we find ${\cdot}out$ that the hull form of the traditional Korean fishing boat is very similar to that of modern sailing boat. Thus, it is a good candidate for the development of the modern sailing boats for the Korean Sea.