• 대한조선학회논문집
• /
• 제36권1호
• /
• pp.70-81
• /
• 1999

선체주위의 점성유동을 계산하기 위해서는 수치계산을 위한 3차원 공간 격자계가 필요하다. 본 논문에서는 타원형 미분 방정식인 Poisson 방정식의 해를 이용하여 3차원 공간 격자계를 구성하는 방법을 개발하였다. 2차원에서 사용되던 Sorenson방법을 3차원으로 확장하여 격자계의 분포 및 교차 각도를 지정하는 함수를 정의하게 하였다. 미분방정식의 해는 weighting function scheme과 modified strongly implicit procedure를 사용하여 구하였고, 3차원 내부 격자계와 경계면과의 매끄러운 연결을 위해 trans-finite interpolation을 이용하였다. 적용예로서 컨테이너 운반선과 대형 유조선 주위의 난류유동 계산을 위한 공간 격자계를 보였다.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.84-89
• /
• 2008

It is hard to find experimental data for a model test of small high-speed planning boats. It is difficult to verify the performance seen in a model test for a high-speed boat because the ship-model scale-ratio is very small and the flow velocity of the circulating water channel and the X-carriage speed of the towing tank are restricted. Therefore most hull-form designs for high-speed small boats depend on the sea-trial test result for similar boats or evaluation through numerical calculations. This study investigated the anti-rolling effect of the stern sub-body in a 50-knot doss planning boat. To carry out this work, new model test procedures were set up in the actual sea. Using this method, the anti-rolling effect of the stern sub-body was investigated. A stern sub-body attached to a planning boat was proved to be effective in reducing the roll and pitch angle.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.78-84
• /
• 2008

As a preliminary step to build a complete superyacht hull design program, the development of superyacht profile design system is introduced. The two-dimensional hull profile is decomposed into four local zones depending upon the functionality and connecting continuity of the profile. Characteristics of each zone are investigated and used to generate the model describing the geometric shape of zone using freeform curves. A set of design parameters is derived from the established geometric model. Generation and modification of a model are is by manipulating the chosen parameters. Four zones designed are integrated to form a final profile. An interactive design system performing all the modeling and modification processes is implemented using the graphic user interface system based an Microsoft Foundation Class and OpenCASCADE, a open graphic library. The shapes of the profiles generated by the developed design system are verified with those of built superyachts. The developed design system will be used for the construction of three-dimensional superyacht hull modeling system.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.147-157
• /
• 2011

A RANS(Reynolds averaged Navier-Stokes) based numerical method is developed for the evaluation of ship resistance and self-propulsion performances. In the usability aspect of CFD for the hull form design, the field grid around practical hull forms is generated by solving a grid Poisson equation based on the hull surface grid generated from station offsets and centerline profile. A body force technique is introduced to model the effects of the propeller in which the propeller loads are obtained from potential flow analysis using an unsteady lifting surface method. The free surface is captured by using a two-phase level-set method and the realizable $k-{\varepsilon}$ model is used for turbulence closure. The hull attitude in vertical plane, i.e., trim and sinkage, is calculated by using a quasi-steady method and then considered in the computation by translating and rotating the grid system according to the values. For the validation of the proposed method, the numerical results of resistance tests for KCS, KLNG, and KVLCC1 and of self-propulsion test for KCS are compared with experimental data.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.531-539
• /
• 2017

전통적인 FRP 선체 제작에는 mould가 요구되며, mould의 높은 제작비용은 FRP 선박 제작자에게 비용부담을 주고 있다. 이를 극복하기 위한 방안으로 강선 건조에서 사용되는 블록 혹은 모듈 방식의 제작기법에 착안한 modular construction 방안이 제시되었다. 이 제작방안을 FRP 선체에 효율적으로 적용하기 위해서는 설계 및 제작 측면에서 간략하면서도 구조적 안정성을 갖는 접합 이음부 개발이 이루어져야 한다. 따라서, 본 논문에서는 모듈방식의 FRP 선체 제작을 위해 moulding-in 개념을 기반으로 한 경제적인 접합 이음부 개발에 관한 연구를 수행하였다. FRP 샌드위치 판을 대상으로 step, scarf-step 그리고 scarf 이음부 형상을 갖는 moulded-in을 수지주입식진공성형 공정에 도입하여 성공적으로 접합된 FRP 샌드위치 판을 제작하였다. 이에 대해 구조적 안정성 평가를 목적으로 인장 및 4점 굽힘 시험 그리고 유한요소해석을 수행하였다. 시험과 해석결과에 대한 비교 연구를 통해 본 연구에서 개발된 접합 이음 내용이 모듈방식의 FRP 선체 제작에 적용 가능함을 확인할 수 있었다.

• 선박안전
• /
• 통권32호
• /
• pp.30-45
• /
• 2012

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 해양레저에 대한 국내외현황 및 보급을 위한 국내 선호도 조사결과, 개발선의 주요제원의 선정, 선형설계, 모형시험 및 특허출원에 대한 부분에 대해 기술하였다.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.53-70
• /
• 1987

The world's largest twin skeg VLBC developed at Samsung shipyard for BHP, Austrailian owner, has been proven as a successful vessel through 1 year's operation record in view of the superior propulsion performances, maneouverability in extremely shallow water and all ship's systems, especially, ship's vibration. The principal technical matter during the design development from the initial design stage to the sea trial has been summarized on this report.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.36-41
• /
• 2004

STX Shipbuilding Company is under construction design the marine training ship if Korea Maritime University. Processing q this training ship development, model test results and design if general arrangement results are introduced in this paper.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제3권1호
• /
• pp.1-7
• /
• 2000

A new alternative for large deepwater field development is described. This "Oil Box" (aka "Box Spar") is a multifunction vessel capable of floating drilling, production, storage and offloading (FDPSO). It is distinguished from other Floating Production, Storage and Offloading (FPSO) vessels by its unique hull form and oil storage system. It's main advantages are flexibility derived from the floatover deck option, use of proven top tensioned riser technology, and motion characteristics which make it operable in a wide range of environmental conditions.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.132-137
• /
• 2008

Ship structures are subject to severe environmental loads causing appreciable hull girder bending which in turn affects the piping system attached to the main hull in the form of a displacement load. While this load may cause failure in the pipes, loops have been widely adopted as a means of preventing this failure, with the idea that they may lower the stress level in a pipe by absorbing some portion of the displacement load. But since such loops also have some negative effects, such as causing extra manufacturing cost, deteriorating the function of the pipe, and occupying extra space, the number and dimensions of the loops adopted need to be minimized. This research developed design formulas for pipe loops, modeling them as frames composed of beam elements, where not only bending but also shear deflection is taken into account. The accuracy of the proposed design formulas was verified by comparing two results respectively obtained by the proposed formulas and MSC/NASTRAN. The paper concludes with a sample example showing the efficiency of the proposed formulas.